What am i doing wrong with Adobe Pro 8 trial version?

i have tried to down load Adobe Pro trial version from the web site. says down load complete I try to launch and get a question if I trust author I say yes click Run nothing happens I have searched for file when I down load I clicked to put in folder where i could find it on desktop but when it started downloading it said for security reasons it would download to a temporary internet file still could not find there... it was downloaded using adobe's download manager even though it was under 1G. from what i read shouldn't use a download manager to download less than a G how do i stop it from doing that i am using a new Dell with Vista and not all that familiar wiht it yet. tried downloading on another computer with XP but it just kicked me out of hte internet when it went to download from there.. help!!! i really need this trial to see if i can use it before i upgrade and really need to do it today if possible
thanks
Steve

Sounds like it might be a new VISTA or IE feature in VISTA. Maybe you could try a different browser in VISTA. Just a guess.

Similar Messages

  • What am i doing wrong with this class please help

    What am i doing wrong with this class? I'm trying to create a JFrame with a JTextArea and a ScrollPane so that text can be inserted into the text area. however evertime i run the program i cannot see the textarea but only the scrollpane. please help.
    import java.io.*;
    import java.util.*;
    import java.awt.event.*;
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.event.*;
    public class Instructions extends JFrame{
    public JTextArea textArea;
    private String s;
    private JScrollPane scrollPane;
    public Instructions(){
    super();
    textArea = new JTextArea();
    s = "Select a station and then\nadd\n";
    textArea.append(s);
    textArea.setEditable(true);
    scrollPane = new JScrollPane(textArea, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    this.getContentPane().add(textArea);
    this.getContentPane().add(scrollPane);
    this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    this.setTitle("Instructions");
    this.setSize(400,400);
    this.setVisible(true);
    }//end constructor
    public static void main(String args[]){
    new Instructions();
    }//end class

    I'm just winging this so it might be wrong:
    import java.io.*;
    import java.util.*;
    import java.awt.event.*;
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.event.*;
    public class Instructions extends JFrame{
    public JTextArea textArea;
    private String s;
    private JScrollPane scrollPane;
    public Instructions(){
    super();
    textArea = new JTextArea();
    s = "Select a station and then\nadd\n";
    textArea.append(s);
    textArea.setEditable(true);
    scrollPane = new JScrollPane(textArea, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    // Here you already have textArea in scrollPane so no need to put it in
    // content pane, just put scrollPane in ContentPane.
    // think of it as containers within containers
    // when you try to put them both in at ContentPane level it will use
    // it's layout manager to put them in there side by side or something
    // so just leave this out this.getContentPane().add(textArea);
    this.getContentPane().add(scrollPane);
    this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    this.setTitle("Instructions");
    this.setSize(400,400);
    this.setVisible(true);
    }//end constructor
    public static void main(String args[]){
    new Instructions();
    }//end class

  • Adobe Premiere shows "Created with Adobe Premiere trial version"

    Adobe Premiere shows "Created with Adobe Premiere trial version" I thought it's a fully function trial isn't that right? I made one project to test the program and it didn't have that on the screen but when i started working on the second one it started showing the message on all the videos "fyi i just downloaded it today"
    I appreciate your help

    It may depend on which Codec you are using.  I know we had to reduce the functionality of Premiere in the past due to licensing concerns.  Was there differences in the encoding you used for the video between the two projects?

  • What am I doing wrong with Export  w/ Action?

    OK, I am starting to love "stacking and virtual copys" of a combination of DNG,PSD,JPG ... all in the same folder.
    So, now I want to "stack" everthing that is generated from the original DNG file ... virtual copys, PSD & JPG. Much cleaner (thank's adobe!) and the Ctrl+E/stacking works like a charm, even with CS3 beta.
    Now, that I am loving "stacks" and having everything in a Day's shoot Folder (with NO sub-folders)... this is my problem:
    In CS3 I created a Action (converted to Droplet and put in LR actions folder) ... it's my usual Portrait plug-in and USM action ... the GOAL is to select all the DNG's in a Folder of the days shoot ... and Export it to PSD,16bit and RUN the action.
    In theory I should end up with all the PSD's in the same folder ... and be able see and "stack" these to the matching DNG's.
    * But, nooo ... when I run the export ... the PSD are in the same folder ... but, I cannot import it back into the Libary??? strange.
    LR tells me it's there ... but shows me the DNG (not the PSD)
    * What am I doing wrong?
    fyi: if you want to know what my goal is ... well, all I want to do is run the action ... and end up with a "stacked"
    1) DNG original
    2) PSD after the action is done (I have got to this point ... but it is not stacked and is not viewed in the LRv1 Library. (nor can it be imported) ... guess this is my biggest problem, right now.
    3) JPG that is converted to my Lab ICC profile .. generated from the PSD. (what I was going to do here is just select all the PSD files and Export and run another action)
    4) WEB JPG from my PSD.
    * note: after I generate a PSD ... I really want to get all my jpg's from the PSD files ... at that point.
    Since Adobe LR has got me HOOKED on using "Stacks" and virtual copys in LR ... I would like to run ALL my actions from LRv1 and after the Export+action is done, have the results back in the same folder "STACKED" to it's DNG file.
    * Now, THAT'S what I call POWERFUL! ... running an export+action and having the "result" back in the same folder "stacked" to it's DNG!!!
    So, there's a great function that will make LR the "killer app" (for me) ... have LR "image process" from the DNG or PSD and have it come back to the same folder "STACKED"!
    (so now ... everyone that wants that power will need to buy both CS3 & LR ... sounds like it's good for me and good for Adobe)
    Did I make this post too long? lol HG

    Thanks H-G.
    It won't stack automatically but perhaps autostack by capture time might work for most of them. You may need to sort out a few but most should work given the right timing (like 1 sec or something maybe)
    I try with the site, but the problem is that Lightroom for most people is a completely new way of doing things and people don't want to get their heads around this. I've been in since I saw a post on B1 in the Rob Galbraith news page the day after it was released. So I've grown with it.
    It's not feature complete, but then neither is V10 of Photoshop! It's still really good for a v1 tool though. Like someone else said, it's not a religious icon, but if it works for us great. I'm happy with it. I still use both PS CS and PSE as well, just not as much.
    Keep looking at lightroom-news.com too. We've a bunch of stuff planned.

  • What am I doing wrong with my form - XML schema producing inconsistent results

    I have an interactive dynamic form built in LCD 8.2.  The idea is that users fill in the form to indicate any fields that they want to update on our directory.
    We do not have the necessary plumbing to get it to feed directly to the directory so the workaround is that the form generates an XML file.  These files are then imported into Excel and then that file is submitted as a bulk update request.
    I have a schema that I have embedded in the form using the Data Connection
    <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <xsd:element name="MySite">
      <xsd:complexType>
       <xsd:sequence>
        <xsd:element minOccurs="0" maxOccurs="unbounded" name="general">
         <xsd:complexType>
          <xsd:all>
           <xsd:element minOccurs="0" maxOccurs="1" name="FullName" />
           <xsd:element minOccurs="0" maxOccurs="1" name="StaffNumber" />
           <xsd:element minOccurs="0" maxOccurs="1" name="JobTitle" />
           <xsd:element minOccurs="0" maxOccurs="1" name="Responsibilities" />
           <xsd:element minOccurs="0" maxOccurs="1" name="LineManager" />
           <xsd:element minOccurs="0" maxOccurs="1" name="LMStaffNumber" />
           <xsd:element minOccurs="0" maxOccurs="1" name="AltContact" />
           <xsd:element minOccurs="0" maxOccurs="1" name="AltSE" />
           <xsd:element minOccurs="0" maxOccurs="1" name="Unit" />
           <xsd:element minOccurs="0" maxOccurs="1" name="TelExt" />
           <xsd:element minOccurs="0" maxOccurs="1" name="WorkMobile" />
           <xsd:element minOccurs="0" maxOccurs="1" name="OutHoursTel" />
          </xsd:all>
         </xsd:complexType> 
        </xsd:element>
       </xsd:sequence>
      </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    I use this same schema in Excel and then generate a test file from my form and then import it.  All goes well.
    I then try it again or get someone else to try it and it fails.  What am I doing wrong?  I thought that embedding the schema into the form would mean that it would become part of the form but I keep getting an error message saying it cannot find an XML map that corresponds to the data. 

    Thanks for your reply.
    The form is fine and no error messages are evident until I attempt to import an xml file into Excel.  The schema is very, very basic and no validation has been applied.
    I've looked at the form today to investigate what the problem may be and have discovered three issues.
    I tried with two different versions of the form to try and work out why one version worked and the other did not.  The only obvious difference between them was that one had been Reader Enabled and it was this form that did not work.
    The non-enabled form produced this output:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <MySite>
    - <general>
    <FullName>th</FullName>
    </general>
    </MySite>
    The enabled form produced something different.
    <?xml version="1.0" encoding="UTF-8" ?>
    - <xfa:data xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
    - <MySite>
    - <general>
    <FullName>gt</FullName>
    </general>
    </MySite>
    <MySite />
    </xfa:data>
    Files with this extra line of code would fail to be imported into the Excel file.
    Another issue was that the Reader Enabled form had a completely different file path for the embedded schema.  In the non-enabled version the path pointed to the correct location on my personal drive.  The Reader Enabled version could not find the schema as the path was incorrect and was pointing to a folder on the temporary drive.  At no point had I manually amended this path to point to there!
    The non-enabled form allowed me to import an xml file whereas the enabled form gave me an error message stating that:
    "The document restricts some Acrobat features to allow for extended features in Adobe Reader.  To create a copy of the document that is not restricted (and has no extended features in Adobe Reader), click Save a Copy."
    Are these expected behaviours or is there something wrong?

  • What am I doing wrong with emails and reviewing attachments?

    I want to like my iPhone, I do. However, it seems I must be doing something wrong becuase in order for view an attachment from and email and make comments about it back in a reply to an email seems exceptionally painful. Right now I have to open the email, open the attachment, read what I want to read in the attachment, then "close" the attachment, then go back to a reply for the email and type my response, then I have to re-open the attachment, find where I was in reviewing it then go back to the email and keep typing again. This just goes on an on. What am I doing wrong? I would expect that the attachment would stay open and I could "flip" back and forth between a reply email and the attachment. Can someone make my life easier? I can no longer be productive at work unless I have my computer with me.
    (I have a separate post for the fact that I can't save a draft more than one time)

    Some links I've saved... a few may help you get started
    HTML and/or DW Tutorials
    http://www.htmlcodetutorial.com/
    http://www.htmldog.com/guides/
    http://www.adobe.com/cfusion/designcenter/search.cfm?product=Dreamweaver&go=Go
    http://livedocs.adobe.com/
    http://www.projectseven.com/tutorials/index.htm
    http://www.w3schools.com/
    http://alistapart.com/topics/code
    http://lynda.com/ Hours of videos.
    (must pay)
    http://www.macromedia.com/devnet/mx/dreamweaver/css.html
    http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
    http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
    http://www.adobe.com/devnet/dreamweaver/?navID=gettingstarted
    http://www.adobe.com/devnet/dreamweaver/articles/understanding_css.html
    http://www.adobe.com/devnet/dreamweaver/articles/css_page_layout_basics.html
    Customizing the layouts that come with CS3 (VIDEO)
    http://www.adobe.com/designcenter/video_workshop/?id=vid0155
    Community MX
    http://www.communitymx.com/abstract.cfm?cid=3D074
    Installing PHP and MySQL on Windows XP
    http://www.webassist.com/professional/products/solutionrecipes.asp
    PDF Adobe DW Users Guide - save for easy searching (23MB)
    http://livedocs.adobe.com/en_US/Dreamweaver/9.0/dreamweaver_cs3_help.pdf

  • What am I doing wrong with this filter (counter/frequency issue), probably another newb question.

    I extracted the part of my VI that applies here.  I have a 6602 DAQ board reading a counter for frequency, using a Cherry Corp proximity sensor.  Getting a lot of noise and errant ridiculously high readings.  Speed of shaft which it's measuring is currently 2400rpm with one pulse per revolution so 40hz. 
    Trying to use the express filter VI to clean up the signal and ignore anything over, say, 45hz and under 35hz.  No matter what setting I choose I continually get the  20020 error, Analysis:  The cut-off frequency, fc, must meet:  0 <= fc <= fs/2.  I know this relates to sample period somehow, but for the life of me I can't understand what I'm doing wrong. 
    I used this VI without filtering on bench tests with a hand-drill and got perfect output every time.  Now it's on the machine and being erratic.  Any help here will ease my stress level significantly, thanks.
    VI attached
    Still confused after 8 years.
    Attachments:
    RPM.vi ‏92 KB

    Hello Ralph,
    I'm not sure about mounting your sensor to your rig, but I can provide a couple ideas about the filtering. Depending on the type of noise, the digital filters on the PCI-6602 could help eliminate the behavior you are seeing. If the noise manifests as a "glitches" or a bouncing signal, you could use another counter with a minimum period to help eliminate the noise. This concept is discussed in greater detail in this KnowledgeBase. I noticed that you are using NI-DAQmx; the practical application of the digital filters on the PCI-6602 in NI-DAQmx is discussed in this KnowledgeBase. A more detailed description of the behavior of these filters is provided in the NI-DAQmx Help (Start>>All Programs>>National Instruments>>NI-DAQ) in the book entitled "Digital Filtering Considerations for TIO-Based Devices".
    I also wanted to comment on your original post and explain why you were receiving error -20020. For convenience, I have copied the text of the error code below.
    Error -20020 occurred at an unidentified location
    Possible reason(s):
    Analysis:  The cut-off frequency, fc, must meet:  0 <= fc <= fs/2.
    I think you may have misunderstood exactly what the Filter express VI does. The Filter express VI takes a series of values in a waveform and performs filtering on those signals. So, it will look at a waveform made up of X and Y values and apply the defined filter to this waveform. Specifically in your application, the cut-off frequency (fc) is the Upper Cut-Off level that you specified in the Filter express VI; any frequency components of the waveform outside of the range you have defined will be filtered. The fs is the sample rate based on the data that you wire to the Signal input of the Filter express VI. In your VI, this data is coming from the DAQ Assistant. So, fs will be the sample rate of the DAQ Assistant and is associated with the rate at which points are acquired. The sample rate does NOT relate to the bandwidth of the signal, except that the Nyquist theorem tells us that the sample rate must be at least twice the signal bandwidth in order to determine periodicity of the signal. So, in this case, the sample rate of the DAQ Assistant would need to be at least double the high cut-off frequency.
    However, you are performing a frequency measurement using a counter. I think this is where the confusion comes in. For the frequency measurement using a counter, the DAQ Assistant returns a decimal value which represents the rate of the pulse train being measured by the counter. It does not return the actual waveform that is being read by the counter. It is this waveform that would be band-pass filtered to eliminate frequency content outside of the filter's bandwidth. Instead of the Filter express VI, I would recommend that you simply discard values that are outside the range you specify. I have modified the code you posted earlier to perform this operation. The image below shows the changes that I made; rather than using the Filter express VI, I simply compare the frequency to the "Low Threshold" and "High Threshold". I use a Case structure to display the value on if it is within the limits. Otherwise, I display a "NaN" value. I have also attached the modified VI to this post.
    Message Edited by Matt A on 09-04-2007 07:58 PM
    Matt Anderson
    Hardware Services Marketing Manager
    National Instruments
    Attachments:
    RPM (Modified).JPG ‏17 KB
    RPM (modified).vi ‏72 KB

  • What am I doing wrong with my recorded actions?

    I'm trying to set up Photoshop to create a bunch of thumbnail images. I've got actions to select various preset sizes with the marquee tool, and then one action that copies, creates a new document using the clipboard preset, pastes, and then resizes the image to 150 x 150 px.
    The problem is that the resizing seems to have a mind of its own. Sometimes in the new image I get the selected area with a big blank space surrounding it, and sometimes most of it gets pasted outside the canvas so only a small part is visible. What am I doing wrong?

    No, sorry, it's CS1.

  • What am I doing wrong with this method?

    Ok I tried this for two hours and for some reason my variables from one method wont work with the other method what am I doing wrong?
    public class Testing
    private static void storage(String[] storage){
    String retval= "";
    for(int i=0;i!=storage.length;i++){
    String getstorage= storage[i]+retval;
    return storage[i]+retval;
    }//for
    }//storage
    public static int[] find(String[] str){
    for(int i=0;i!=str.length;i++){
    if(str.equals (storage[i].substring(0,2))){
    return indexOf(str[i], str[i].length);
    else If(str[i].substring(indexOf(str[i]),str[i].length)>storage.substring(indexOf(storage[i]),storage[i].length)){
    return {0,0};
    };//elseif
    }//if
    }//for
    }//find
    }//StrStore

    Thanks got that part fixed and I even kinda learned how to make it so that I can establish the variable somewhere else lemme show you:
    public class StrStore
       private static String[] storage(String[] storage){
                for (int i=0; i!=storage.length; i++);
                  String retval="";
                  return storage[i] +retval;
               }//for
             }//storage
       public static String[] getStorageArray()
         String[] temp= new String[storage.length];
         for (int i=0; i!=storage.length; i++){
                  temp= storage[i];
    return temp;
    }//for
    }//getStorageArray
    public static int[] find(String[] str){
    for(int i=0;i!=str.length;i++){
    if(str[i].equals (storage[i].substring(0,2))){
    return {indexOf(str[i], str[i].length};
    else if(str[i].substring(indexOf(str[i]),str[i].length>storage.substring(indexOf(storage[i]),storage[i].length)){
    return {0,0};
    }//elseif
    }//if
    }//for
    }//find
    public static int[] encode(String str){
    for(int i=0;i!=str.length;i++){
    if(str[i].length>storage[i].length);
    return str[i]+storage[i];
    else{
    find(storage[i]);
    }//elseif
    }//if
    }//for
    }//encode
    public static Int[] decode(int[] code){
    for(int i=0;i!=str.length;i++){
    return find(storage[i]);
    }//for
    }//decode
    public static void main(String[] args)
    int[][] codes = new int[args.length][];
    for(int i=0;i!=args.length;i++){
    codes[i]=encode(args[i]);
    }//for
    storage(getstorage);
    System.out.println("storage = "+ getStorage);
    for(int i=0;i!=args.length;i++){
    System.out.println(decode(codes[i]));
    }//for
    }//main()
    }//StrStore
    however Im still coming up with 5 errors now one is stating that in this section:
    public static String[] getStorageArray()
         String[] temp= new String[storage.length];
         for (int i=0; i!=storage.length; i++){
                  temp= storage[i];
    return temp;
    }//for
    }//getStorageArray
    that a class is expected but I thought I had the class defined? I get that also here:
       public static int encode(String str){
               for(int i=0;i!=str.length;i++){
                 if(str.length>storage[i].length);
    return str[i]+storage[i];
    else{
    find(storage[i]);
    }//elseif
    }//if
    }//for
    }//encode
    but instead of the beginning I get it at the very last line of that snippet
    then I get that these two variables are incompatible
    private static String[] storage(String[] storage){
                for (int i=0; i!=storage.length; i++);
                  String retval="";
                  return storage[i] +retval;
               }//for
             }//storage

  • What am I doing wrong with Flex 3 and BlazeDS

    I using Blaze, Flex3 and Cairngorm, I have a simple
    application at the moment, in which I dispatch a Cairngorm event,
    it gets picked up the Command is executed and the Delegate can send
    data to the RemoteObject. I can see in the output that Blaze is
    doing what it is supposed to do and returning what it is supposed
    to return, but the data returned never makes it to the IResponder
    result function. What am I doing wrong? Can post code if
    needed.

    +I read on itunes help that I could import CDs to my library without internet connection, and did so to about 10 old ones and now cannot figure out how to get their track/artist names.+
    You get the track/artist names off the back of the CD and type them in yourself.
    You have to have internet for itunes to get them automatically from the gracenotes/CDDB online database.
    Importing one-by-one and editing the info would have been a better scheme. Now you've got a hot mess!
    Unless you know the songs well enough to recognize them when they're played, I don't see how you're going to get it all straight without importing them again.

  • What am I doing wrong with the _ visibility property?

    I have an object that is a movie clip, and I want this object to disappear when you click on him, but also the button that makes the object to appear to make also the object to disappear.Either way, when you click on the object or on the button the second time, the same object to disappear.  I managed to do that, but the first time when you click the button in order to make the object appear it dosen't work, you have to click twice.What am I doing wrong? The object it's a movie clip named frez1, and the button is named fr1. I put this codes in the main timeline:   for the movie clip :           frez1.onPress = function(){                                      _root.frez1.gotoAndStop(2);                                      _root.frez1.gotoAndStop(1);                                           }  for the button:          frez1._visible = false;                                     fr1.onRelease = function(){                                  frez1._visible = !frez1._visible;                              }   The button and the object are on different layers.  Thank you for your help.

    Oh sorry, only now I have seen how it has been displayed. The codes are like this:  for the movie clip:  frez1.onPress = function(){                                     
                                                                                                                                                                _root.frez1.gotoAndStop(2);
                                                                                                                                                                _root.frez1.gotoAndStop(1);   
                                                                                                                                      for the button:   frez1._visible = false;                                   
                                                                                                                                                             fr1.onRelease = function(){                                 
                                                                                                                                                             frez1._visible = !frez1._visible;                             
    Yes the movie clip switching between frames and 1-2 it is turning  him invisible.
    So in order to make him go between this two frames I have to put  the visibity property and not the root ?
    Thank you

  • What am I doing wrong with iPhone 5 iTunes Podcast sync?

    I feel like I'm in a math equation messing up the order of operations every time I sync my device to my iTunes. If I ever catch up on all my podcasts, maybe this will stop being an issue, but here's the problem.
    90% of my podcast listening occurs on my iPhone 5. I have it set up to auto download. I also have an iPad that I will ocassionally listen to podcasts on that. For the most part, I think these sync via the cloud, but with some issues for sure. I'll often close and re-open the Podcast app to see if that gets them to keep talking to each other.
    Ok, but the real problem: I have all my podcasts in iTunes, and whenever I sync my iPhone to iTunes, some podcasts get loaded back onto my iPhone that I've already listened to.
    What the heck am I doing wrong?

    You're welcome.  It's not unusual to have a different number of photos and videos on your devices.  Videos aren't synced with photo stream so unless you import them to your computer and sync them to your other device they will only be on the device they are taken on.  (Also, if you sync them to your device, they will appear in the Videos app rather than the Photos app.)
    Having a different number of photos usually results from having turned on my photo stream at different points in time on your devices.  My photo stream photos only remain in iCloud for 30 days, even though your last 1000 photos will remain on your devices until deleted.  As a result, when you first enable my photo stream on a device it can only download photos from the last 30 days, even though there may be old photos on your other device(s).
    If you want to use iCloud to get the missing photos on your device, you can add them to a shared stream on the device they are on (see http://help.apple.com/icloud/#/mm1bdd9cae49).  (You don't have to invite yourself to the shared stream, just skip this step.  As the owner of the shared stream you are automatically subscribed to it.)  The new shared stream will appear on your devices in the shared section of the photos app.  You can then open the shared stream and save the photos to the device that didn't already have them by tapping Select, tap the share icon (box with upward pointing arrow, then tapping Save Image).  Once they are saved, you can delete the shared stream.

  • What am I doing wrong with Kuler?

    When I launch the Kuler web app, a blank screen appears. There is nothing to choose or select.
    Also, when I try to access it from within Illustrator, it says that there are no themes available in my
    account. What am I doing or not doing. Any assistance would be much appreciated.
    Thanks,
    Stephen

    Hi Stephen,
    I just tested and it worked okay for me https://kuler.adobe.com/create/color-wheel/
    What browser were you trying in? Could you test a few others?
    - Dave

  • "Created with Adobe Premiere Trial Version" banner on my project

    I downloaded the Premiere Pro trial and I completed my project but I don't want to export it because of a banner through the middle of all my clips.
    Will that banner be there when I export?
    Thanks.

    Never ever seen any Adobe watermarks.
    Is this a new thing?

  • What is the serial number for Adobe Premier Trial version?

    I have dowloaded a free trial and have been prompted for a serial number.......

    Hi Amandahookey,
    The trial version does not require a serial number. Your Adobe ID will suffice.

Maybe you are looking for

  • How to get standard view or table for the standard inforsource

    Hi all:       According to business reqirement, we are going to use standard inforsource 0CO_OM_CCA_10, we need to know the standard view or table in order to corresponding DataSource? could you please tell me how to get  the standard view or table o

  • How can I create an iPhone3g ringtone from a recorded MP3

    I've recorded my daughters voice as an mp3 file (about 10 seconds long) and want to use it as a ringtone on my iPhone3G but cannot figure out how I do this. I'm using iTunes8 and all the instructions I've found on creating ringtones will not work as

  • Create purchase requisition from Sales Order

    Hi, Is there a transaction to convert directly a sales order into a purchase requisition or even purchase order? When our sales orders are too big our suppliers send the material directly to our customers and right now we do the PO manually. Best Reg

  • Seeburger Splitter:Fatal error in user mapping . java.lang.StackOverflowErr

    Hello, I have created a mapping E2X_SLSRPT_UN_D96A as we didnt have the standard mapping(See_)  from Seeburger In my scenario when I give hardcoded mapping name ,it works fine,so I assume mapping is correctly created and deployed. But I need to use i

  • Multiple email address on a receiver Mail Adapter

    I would like to send the following data to the mail adapter. It does seem to like the multiple email ids I have separated by comma. Is this allowed? If I pass one address it seems to work fine. Thank you for all your suggestions. <?xml version="1.0"