What am I missing? Logic X starts quick but is seemingly the slowest Logic ever with all else!

Hi there,
Logic X is a perfect beauty and lots of fun to use but it seems only to start very fast, meanwhile bouncing tracks or creating overviews for imported tracks seems to take 4X as long. I am not sure what the point is in making it start up fast but yet let it work seemingly 4X slower that the older versions. What am I missing?

Mac Pro Mid 2010
Processor  2,8 GHz Quad-Core Intel Xeon
Memory  16 GB 800 MHz DDR3 ECC
Graphics  ATI Radeon HD 5770 1024 MB
Software  OS X 10.9.2 (13C1021)
7 External HD'S (But before you scream, I have a startable HD with Logic 9 on 10.6.8 and the word "Perfection" is not strong enough to describe how well it runs!)
Metric Halo 2882
No Controllers

Similar Messages

  • What does it mean when I start my computer and there is a file folder with a question mark?

    What does it mean if I start my computer and there is a file folder with a question mark blinking?

    That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
    For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
    Or OWC  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
    Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

    Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
    Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
    install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

    Thanks for the help
    I started on the installation CD OS X 10.4.2, I used Disk Utility
    to partition the disk according to the document that you have proposed. unfortunately
    I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
    does not keep the name and it shows disk0s3 instead. I did an erase on disk.
    When I mount the disk it tells me that I must repair. When I tried to repair, I got
    the following message:
    Volume check failed
    The underflying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error.
    I also had a message:
    Invalid b-tree node size.
    Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
          I used a USB 2.0 to SATA cable to adjust the formatting.
    What to do to fix it?

  • How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

    How do I revert to original footage in Final Cut Pro X version 10.0.9?
    For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
    Only the edited version which is no good without the audio?
    Please  Help

    What format is your problem clip? Are there wave forms visible in the section without sound?
    Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
    Russ

  • I can't get the laptop to start.  I get to the gray linen screen with a gray apple and stop.  It will not ask for log in.

    I can't get the laptop to start.  I get to the gray linen screen with a gray apple and stop.  It will not ask for log in.
    What do I do now?

    Hold the shift key at boot time, then run through this list, did you install anything recently or perform a update of some third party software? Uninstall it.
    Step by Step to fix your Mac
    Mac won't boot or "You need to restart"
    Create a data recovery, undelete boot drive

  • Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

    When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! Please help!

    Question
    I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! It's almost as if something is blocking it ffrom completing the process. Please help

    Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

  • HT4718 I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts?

    I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts? It gets about halfway through loading and then stops, no mouse, no nothing. I think I'll be able to move past it if I can reach the Recovery options.
    Thanks!

    If you are really sure that it's impossible to click in Recovery mode, then something is wrong with the machine.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

    hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

    In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
    Set it also to notify you of the changes, so you will have to approve any changes.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Laptop won't start quickly but power wifi and caps lock light keeps blinking

    Hi, it has happened before too but rarely but nowadays it happens on daily purposes.
    When I switch on my laptop after leaving it for 8-9 hrs, it won't start up but instead power, wifi and caps lock light keep blinking. I tried removing battery and pressing power button for few minutes but nothing happens. Then i left it like that with lights blinking and after 15 20 minutes it booted. I did same yesterday too. I left it like that it booted after 20 minutes..so My question is "why is this happening? Is it a motherboard issue or is it because of cold moisturous weather here and laptop takes time to get warm up?" Should I show it to HP Service center?

    Hi @Nishant5788
    Welcome to the HP Support Forums. I see that you are having a problem getting your notebook to boot up normally. As for what is causing the problem the blinking Caps Lock should tell us what is causing the problem as it should be blinking in a pattern. This HP document Computer Does Not Start and LEDs blink has a chart that will tell you what the blink codes mean.
    This is most likely a hardware issue and you can give us a call regarding repair options.  You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Laptop starts up but screen is black(does​n't happen all the time) PLEASE HELP

    I own a Toshiba Satellite L505-S5966. It's 4 years old and for the most part I haven't had any problems up until recently. The first problem was it started to say "battery not detected" and saying my battery was in poor health and to replace it. Well I did replace it but it still continues to say not detected, but that is the least of my worries. I will say my AC adapter isn't the original as I had to replace that about 2 years ago.
    One day while using my laptop, the screen just went completely black. I turned it off and tried to turn it on and nothing. Looked up some stuff on Google which said to clean out the dust, which I did. I also took the battery out and held down the power for 60 seconds. Well after doing that it seemed to work fine until the screen went black again. I did it again and it seemed to work. But sometimes when I turn the computer off, and try to turn it on, I can here it come on but screen stays black. If I wait a while it will work though.
    Well it keeps doing this on and off. Other issues I have had is 2 times a blue screen came up. Once it was too quick to read but another I did have a chance to read it and it said something about "APC_INDEX_MISMATCH." Also about 2-3 time I've gotten a screen that said "Interactive Services Detection- The program is no longer requesting attention...." while online but I can always hit "return now" and everything is good. And then recently when I went to turn my laptop on a screen came up saying "Windows loading screen" but it froze up and never loaded anything so I had to hit the power button to restart.
    I know it's not good to hit the power button to restart but it's the only way I can get it to turn off because whenever the screen is black or on the blue screen, the keyboard doesn't work at all. I would like to mention sometimes I have to restart because the keyboard will freeze up and nothing will work. The keyboard is brand new, I just recently replaced it but I know I installed it correctly. Everything else is also correctly in place as well.
    I've ran anti-virus and malware scanners both in safe mode and not. Everything says it's good and shows no viruses or anything. I also did a memory diagnostics and it too came back good. I didn once mess with the toshiba diagnostics and it said my harddrive failed but I read on Google that the Toshiba diagnostics tool isn't reliable and many get a harddrive failure when it's not the case.
    I would really like to know what could be wrong with my laptop. I haven't took it anywhere to be looked at because I don't want to pay $50 to find out it will cost $300 to fix. I'd much rather see if I can find out what's wrong online before having to take it anywhere.

    gottarace wrote:
    I have a L675d-s7100 that lost a harddrive. Since it crashed I had no restore. So blew 40 bucks on disc from toshiba.
    New Drive installed. disc get here. reset to day via disc. Started up ran good for about 3 days. BLUE screen.... reboot all was good. Then it started to happen more often..  Now about a Month later. The display will just go black. you have to let it set hours with battery out and power cord off. reboot all is good. NOW display won't come on. hit power it clicks and fan comes on and nothing.  Hooked up to ext  did the FN F5 and still nothing. I put the olg drive back in. it would at least light the screen. Nothing..  Anybody have any ideas???
    Thanks all...
    Todd
    In the future if you could, just start your own thread just to make things easier to keep track of.  If you did and didn't get a reply (wait at least a few days), then you can bump so it goes back to the top.  OK, sermon over
    When you get a blue screen, what was the error message.  One of the first things I do when I get a computer is go into the settings and disable the restart on system failure so it doesn't go into a boot loop and I can read the error message.  I don't know why that is set that way on default.
    If you hooked up the computer to an external display and still not getting anything, then it suggests its not a bad display. 
    Can you get into the bios?  Can you access the recovery partition?  If you have another working computer available, can you connect your new and/or old drive and do a diagnostics on to see if there are any errors?  Besides the new hard drive, have you done anything else to the computer like upgrade ram, etc?  You can also try and reseat the ram. 
    If you can get to the recovery partition, you can try a system repair.  Of course this will only work if the problem is software.  If it is a hardware issue, you have to try and isolate it (i.e., drive, ram, battery, etc.).
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Why I cannot show what I am playing on my Mac on my TV? The Mac has connected with the TV

    My product: Mac Pro.Retina, OS X Version 10.9.5
                        Processor-2.3GH Intel Corei7
                        Memory 16GB 1600MHz DDR3
                        Graphics NVIDIAGeForceGT750M2048MB
                        Serial No. C02MK36VFD57
                        Software OS X 10.9.5(13F34)
    The Mac has connected with my TV but my TV shows: no message!
    I used this method to show my playing videos from the Mac to this TV before but it cannot work now. I'd love to know how come.
    please tell me where the problem is.
    Thank you very much!

    Hi Isaiah,
    Your set up is not completely clear to me, in particular what kind of TV you have and how it connects to your MacBook Pro, but this article may give you some help with getting your computer to work with your TV for video -
    Apple computers: Troubleshooting issues with video on internal or external displays
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I've synced ok till recently but an now having problems syncing myipod touch on windows platform - seems to start ok but then get the error message "an unknown error has occurred 13019" and the sync stops at that point so new music is not added - help!

    Hi
    I've been able to sync in the past but recently get an unknown error 13019 and the sync is stopped - so new music i've loaded up and other stuff doesn't go across - my ipod classic syncs ok as usual - but my ipod touch has the error.
    Please let me have any ideas to fix
    thanks
    Bill

    Have you seen this support article related to your error message?
    http://support.apple.com/kb/TS2830
    Or see this older thread with a number of other potential solutions.
    https://discussions.apple.com/thread/2046768?start=0&tstart=0
    B-rock

  • Adobe Reader 11.0.03 starts up but then crashes (the screen disappears)

    I have windows 8 OS. After downloading the free version of the Reader and trying to read a PDF document, the Reader window temporarily opens up but then a few seconds later it disappears. I also tried disabling McAfee, but the problem did not go away. Any ideas what the problem is??

    Hi,
    Please check this: http://helpx.adobe.com/acrobat/kb/troubleshoot-errors-freezes-reader-windows.html
    Regards
    Aditya

  • When I am starting firefox after some time an error comes up that says unable to start script but it seems to work ok if I tell it to ignor . The error really slows the Firefox start.

    I am assuming something has happened to a component of firefox. Also the tool bar does not come up and tells me to reinstall but I don't have a clue how or what to install

    It sounds like there is something in the profile that synced to the new one. Does this also happen when you create a new profile and restore the information manually?
    * [[Back up and restore information in Firefox profiles]]

Maybe you are looking for

  • Help - cant get back to desktop

    I booted my powerbook using command+s. How do I return it to the normal desktop?? Every time it turn it on it just loads up a page that looks like terminal -black with white text. the message it displays is etc/master.passwd: No such file or director

  • Adobe photoshop elements 8  downoad

    My old computer with Adobe Photoshop Elements 8 crashed - where can I download the old software version since I don't believe my license key will work with the newest version? Thank you

  • MMR Number ranges

    Gurus, I am working with INR for MMR.I goto MM01,goto basic data view.I dont enter any data & come out of the screen.Even though no data is entered.The material number is consumed. Is it possible to prevent from material number being alloted.

  • Multiple Raw updation

    Hi, I am using oracle 8i Database. I have two tables related to CUSTOMER. (Say CUST_A, CUST_RA). Both having common column like customer_number, Customer_Name. Both table customer_numbers are same. But some customer_names are different. So I want to

  • How much does it cost to replace the screen on an iPod touch?

    How much does it cost to repair/replace and iPod touch?