What am I seeing just prior to "Loading"?

I've been using Lightroom for a while now, though I gave up on it early on with 1.0 and took a few months off. I've come back to it as of a month ago and am really enjoying it. One thing puzzles me and I can't seem to find an answer to it anywhere: after I've copied the RAW files off the memory card, when I browse to each RAW file I'll see the image with a certain colour temperature and settings as it says "LOADING"...then a second or two later it will pop into a flat, neutral setting (what I'd expect to see from a RAW files).
In the couple of seconds before it loads, what am I seeing? An embedded JPEG? Or the RAW with some sort of default Lightroom setting? Sometimes I really *like* what I see and can't ever quite get it back to that...

If you want the actual jpeg preview from a RAW file that you didn't shoot RAW+jpeg, you can use exiftool (google for it) to extract the jpeg preview from a RAW. Also, if you load the RAW into the vendor supplied tool, you should get a similar rendering as in-camera jpeg.

Similar Messages

HT204053 I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's

I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's up?
Also, it says the iPhone 5 is not registered to my Apple ID.

See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221

My Lightroom kepps stopping just after being loaded. My Lightroom is 5.4 64 bits installed on a Dell PC with Windows 8.1(upgraded from 8). I have uninstalled Lightroom and re-installed it with the same result. What could be the problem?

My Lightroom kepps stopping just after being loaded. My Lightroom is 5.4 64 bits installed on a Dell PC with Windows 8.1(upgraded from 8). I have uninstalled Lightroom and re-installed it with the same result. What could be the problem?

Try resetting your preference file next: http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file
It survives an uninstall/reinstall.

Purchased a Book which iTunes just won't load on my iPad. What to do? Thanks for helping me.

Purchased a Book which iBooks just won't load on my iPad. What to do? Thanks for helping me.

Try re downloading the book. You won't be charged again.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
And tap Settings > General > Restrictions
Make sure Restrictions is not turned on.

Does anyone else see a blue screen just before leopard loads up?

Hi just wondering Does anyone else see a blue screen just before leopard loads up? It when i start my cpu after the apple logo and spinning wheel, then it goes to a blank blue screen for a second, then the desktop. Just wondering if that was normal. Thanks

Yes, it is normal for a Mac to have a blue screen during start-up.
You may also see it change colors from blue to gray.
-Mike

My macbook isn't starting it just do the loading sign on the top of the apple sign. what can I do about this?

My macbook isn't starting it just do the loading sign on the top of the apple sign. what can I do about this?

The startup disk may need repairing ...
Restart your Mac while holding down the Command + R keys so you can access the built-in utilities in OS X Recovery

Diappearing photos replaced by an exclamation point within a triangle. Prior to loading Lion I could put the image number in finder and locate the original file for that photo. How do I restore photos now?

I had problems with photos disappearing and being replaced by an exclamation point within a triangle. I can see the photo in the thumbnail summary but when you click on it, the screen goes black and the exclamation point within a triangle appears along with the info on the original image number (i.e., img_1120.jpg). Prior to loading Lion, I could go to Finder, enter the image number and locate the original file for that photo. I could then restore it for editing, copying into Print Shop directly, etc. That no longer works after installing Lion. How do I restore photos now? I have 100s of photos that I have been going back to the original files and restoring and I am frantic that I will no longer be able to get to the original files. Please help! Thanks

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I tunes just won't load

i downloaded itunes about two hours ago. and it wont load the software. it gives the sighns of loading but nothing ever happens. i have restarted the computer four times now but it still just will not load. what do i do?

Have you tried deleting and reinstalling the app (via the Purchased tab in the App Store app, if that tab is working), and if that doesn't fix it then have you tried contacting the developer (there should be a link to the developer's site on the app's description page in the store) ? If re-downloading and contacting the developer doesn't get you anywhere then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link.

Itunes freezes just prior to software verification during pad/phone upgrade

Hi,
I'm posting this in a few forums to see if I can find an answer. Here's the deal:
Both my iPad and iPhone 3G freeze at the exact same place while performing the upgrade to iOS 4.0.1..freeze just prior to verification of software on devices. What this means to me is that I have to recover them..I tried on my Mac Pro several times, rebooted the machine etc...no luck. So just prior to calling Apple, I thought, what the hay, I'll try it on the iMac...both devices screamed through the process and upgraded/restored/recovered without a hitch. Brought them back to Pro and restored my old settings..fine.
Why?
The only difference with iTunes is that the Mac Pro has all of my music/videos/tvshows...the iMac is basically a clean slate iTunes.
Any suggestions...I don't want to reinstall iTunes on my Pro.
thx
shaun

I spoke to ipod tech support and was told "We do not support itunes. It is only a web based support" Which apparently does not exist.

20" imac freezes just as desktop loads. Disk verify OK. It runs in safemode. Any help?

My imac freezes as the desktop loads - dock icons don't respond. Safemode OK (ish) - disk verify checks out. Help

What do you see in : (note you may not have some of these folders)
Macintosh HD -> Library -> StartupItems?
Macintosh HD -> Library -> LaunchAgents?
Macintosh HD -> Library -> LaunchDaemons?
What do you see in
Macintosh HD -> Users -> Your Name -> Library -> StartupItems ?
Macintosh HD -> Users -> Your Name -> Library -> LaunchAgents ?
Macintosh HD -> Users -> Your Name -> Library -> LaunchDaemons ?
If you have multiple accounts on the computer; dose the issue happen with every account or just some accounts?
When booted into safe mode, if you go to Apple Menu, System Prefrences, Accounts, your account, login tab. What items do you see listed there?

IPad just won't load ios6...

My iPad just won't load ios6. There's always a fault message popping up. What's wrong?

Hi,
also happens to me, with Windows 7-64b, latest itunes installed and iPad updated to current iOS version (i achieved to sync once in 15 days after desabling antivirus NIS 2011, but never more achieved...)
It is supposed that today's upgrade on iTunes version was addressing this kind of problem, but not at all.
It is funny, but my ipod nano it is synced perfectly, not any problem. but ipad starts connecting, let's iTunes stuck for 4-5 minutes and later nothing into iTunes, no device.
I have tried all solutions, including full uninstall of itunes and all the stuff related up to 9 times in the last days, but nothing to do.
Do I need to pay for Apple care for a problem that have caused themselves? Are they going to do something to address this upsetting problem with the sync? Maybe it will be a solution to restore completely my ipad?
Let's see if some on can find a workaround...
C.

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

1.burned a hole in my screen can I get this repaired? 2. Even though I have it set to open up to a blank screen, no web pages, my computer (safari) continuously opens with multiple safari sites open. It doesn't seem to matter what I do, it just reverts

1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me... "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks

Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
Good luck,
Clinton

Can somebody please advise urgently... I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion. I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted

Can somebody please advise urgently...
I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion.
I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted the folder off my desktop - and following this - things started to go all weird...pages hanging, the coloured 'wheel of death' appeared for ages. So i had to employ a 'hard-boot' restart - as i had not other options.
I'm pretty sure i made copies of of files/apps/folders etc - however not so sure now as i cant even start up my laptop!!!
Can somebosy please help me urgently??!!!

Got the exact same problem, and I also did this operation many times before, from 500Gb to 750Gb, and then from 750Gb to 1 Gb. Not My HD got a little such complaining about bad sectors when in windows bootcamp, but still runs fine though.
So I bought a new 1Gb drive exactly same drive as the one thats getting sick. I did the clone thing, with super duper, CCC, DU, but no matter it will not boot when i move the new drive inside the macbook…….**** thing exuse me, but wasted so much time.
Now I get this strange feeling that something must have changed in the macbook itself. Just wondering if this could be a EFI "mac bios" prevention thing, they made just to sell more new computers, when you can't improve or fix your old one.
If so, then its pretty scary. If not then I simply can't figure out why this suddenly becomes a problem for so many people, as I see so many posts about this!!
BR Pete

HP PSC 1610 All-In-One doesn't see that paper is loaded

HP PSC 1610 All-In-One doesn't see that paper is loaded and keeps asking me to load paper and press OK. I have done that per manual with no success. What's going on?
I am using an Intel MacBook running SnowLeopard

OK, I think this was among a series of "recalled" (years ago) printers where the feed rollers would become coated with a very slick substance that was outgassing from the rubber. There was a cleaning kit made for this but I am not sure it is still available. Instructions for it are here.
It the absence of the kit, you can clean the rollers manually by removing the rear door and scrubbing the three rollers with Scotchbrite. Red was used in the kit, but green may be aggressive enough to do the job. You may have to fiddle with the printer to clean the entire circumference of the three rollers. Once you do this, you will be good to go for years to come!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

What am I seeing just prior to "Loading"?

Similar Messages

Maybe you are looking for