What are acceptable speeds?

After doing a speed test we are only getting download 1.45mbps & upload of 0.56mbps

welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results .
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

    Hi All,
     I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
     What are relative speeds of USB vs. Firewire vs. eSATA ?
     I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Thanks

Jim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

What are the speeds like?

Hi guys, im currently on o2 broadband and its slow as and im looking to upgrading to infinity in july when its in my area (guildford) and i want to ask what are the speeds like when playing on xbox live, psn, downloading torrents and downloading from file upload sites such as megaupload ect. most of the usage of our home internet is used as online gaming and downloading from file upload sites. We rarely use torrents.
Thank you!

You would like a Graphic off me???????????? Having said that I've just checked and for some reason Fri & Sat has gone up to 28ms. I've got lots of graph's to show this but it would take up to much space on here. This is my dashboard so you can see.:-
iechyd da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

What are the speeds of the USB Stick?

I've bought a USB Memory Flashdrive, its the USB2.0 2GB..
Can anyone tell me why I can't use this USB Stick for ReadyBoost?
What are the speeds of the USB Stick?
Kind regards

and for people who haven't heard about Windows Vista ReadyBoost:
http://blogs.msdn.com/tomarcher/archive/2006/06/02/615199.aspx
Q: What perf do you need on your device?
A: 2.5MB/sec throughput for 4K random reads and 1.75MB/sec throughput for 512K random writes
My speeds according to the site in the post above:
Reading speed:
8 MB/s (max.)
Write speed:
4,8 MB/s (max.)
Speed USB port:
60x / 2.0
this is all according to this site, I was looking for official details on the Toshiba site but couldn't find any so here I am...

What are acceptable battery condition values

I've seen quite a few other questions about battery conditions, but many of them refer to a battery being x% of capacity.
Firstly, how do I find this value for may battery?
Secondly, I have an 15" MBP that I bought about April last year. According to the System Information display, I get the following data:
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 1433
Remaining Capacity (mAh): 1433
Amperage (mA): 23
Voltage (mV): 12571
Cycle Count: 43
AC Charger Information:
Connected: Yes
Charging: No
My second question (related to the first) is what should the 'Full Charge Capacity' figure be? Where can I find out this type of information?
Thanks
Susan

Full charge capacity for a new 60W battery (as found in the 15" MBP) is around 5500 mAh. Programs like iStat Pro and CoconutBattery divide 5500 by your current full charge capacity to give a battery 'health' percentage - so yours is 26%, which is terrible.
Based on the readings below, your battery appears to be prematurely failing. Apple states a battery should maintain 80% (i.e. >4400 mAh) of it's capacity for 300 cycles.
Apple extended the warranty to two years from date of purchase for all Core Duo machines (nothing said about C2Ds, though - but since you bought in April 2006 you have a Core Duo MBP). That is stated at the bottom of this page.
Be sure you have installed Battery Update 1.2 (see the link above), and calibrated your battery recently. Then, call AppleCare - they should send out a replacement battery.
Hope this helps...

What are acceptable measurement fluctuations for the SCXI-1126?

Greetings,
We are using an scxi-1126 module in a PXI-1011 chassis. The range for channel 0 is set at 2 kHz. The channel is configured for a threshold voltage of 0.1 with a hysterisis of 0.05. We are injecting a 1 kHz sinewave, 800 mV pp signal into the channel. The SCXI-1126 reading is fluctuating by as much as 0.6 Hz at all frequencies (below 2k). We have tried changing the window, signal levels and various other suggestions from the NI website with no success. Should the reading be more stable or are the fluctuations the result of the F-V conversion process? Any suggestions would be much appreciated.

Hello,
Please look at the Specifications section of the SCXI-1126 User Manual (pg. A-3) at the following link:
http://www.ni.com/pdf/manuals/321844c.pdf
From the Accuracy Table for a 2 kHz range, the accuracy a year after purchase should be 0.0418% ± 0.308 Hz. Which for a 1000 Hz signal would be 1000 * 0.000418 + 0.308 Hz = 0.726 Hz in the worst case. 0.6 Hz would fall within the spec'd range.
Let me know if you have any further questions.
Sincerely,
Sean C.

What are acceptable BaseValues for plots for which fills are desired?

I am trying to set the BaseValue property for a Plot on a graph. I can successfully set the value to 0, but I do not know how to set it to either +Infinity or -Infinity. I have tried using DBL_MAX or -DBL_MAX, but these do not work. Can anyone set me straight?
Thanks in advance.

The Measurement Studio graph for Visual C++ does not currently support +/- infinity. Your best bet for now would be to use numeric_limits::min() and numeric_limits::max(), although I think these are the same as -DBL_MAX/DBL_MAX.
You may have noticed that the BaseValue property drop-down on the Plots tab of the property pages has values for -Infinity and +Infinity, but these will just set the BaseValue to numeric_limits::min() and numeric_limits::max().
- Elton

What are acceptable cpu temps.

Hey guys,
I've never been able to monitor my cpu temp before and was wondering if my temps are in the normal range.
idle: 40-45 C
Converting DVD's to mpegs: 78-80 C
Using Garage band: 65-70 C
Safari:40-50 C
Photo Booth:50-60 C
Video Chat: 60-70 C
Are these about normal? pushing 80 seems pretty warm...

From many conversations we have had on this subject the temps you posted are normal. Mine usually runs 80º C to 85º C when streaming video.

What are the speeds of singe/multi core processor for iPhone 6

i have an iPhone 6 and have just run Geekbench 3 test for the processors and got:
SIngle Core 1164
Multi Core 2049
Geekbench give an average score of:
Single Core 1607
Multi Core 2831
The scores for my phone seem to be quite low in comparison to Geekbench results.
I this something I should be concerned with?

No, you don't have to be concerned. Every bench test will give you different results, and In the end it's a phone and not a high-end computer like the Mac Pro to do your video editing.

What are the advantages of varying write speeds and burn speeds?

What are the advantages of varying write speeds and burn speeds?

The slower the speed, the fewer burn errors (or, in other words, you'll burn fewer "coasters"). I've always tried to burn at a slower speed, i.e. 2x - 4x. I'd rather wait a few minutes more and I've never had any burn errors.

What are various data speeds supposed to be?

I am doing my research now on the iPhone while awaiting the end of my Sprint contract. I currently on the slow Sprint data network using a Treo 650. All my bookmarks are to text based mobile sites: BBC, NYT, etc.
I was playing with an iPhone here in Phoenix yesterday & the full graphic sites like BBC World News displayed pretty slow on the Edge network.
What are the various "published" speeds supposed to be for the slower Sprint, ATT Edge & ATT 3G Networks? In "theory" how much faster is 3G over Edge?
Thanks.

Sonoran08 wrote:
What are the various "published" speeds supposed to be for the slower Sprint, ATT Edge & ATT 3G Networks? In "theory" how much faster is 3G over Edge?
In theory EDGE has a maximum speed of 220 kbps, and 3G 1500 kbps as implemented by AT&T. In practice I get about 200 kbps and 1000 kbps respectively using the aircard on my laptop. So 3G would appear to be 5 times faster than EDGE. Some magazines have done real comparisons between the iPhone and a 3G PPC. The found much smaller differences, from sites that took about the same on both to a best case of the PPC being twice as fast as the iPhone. The reason is that a website requires many requests to the server, and each one requires the overhead of setting up and tearing down a connection. So this "latency" slows down the useful throughput. This would not be an issue for email or youtube, however.
On my laptop 3G is faster than EDGE for web browsing one page at a time, but not strikingly so. The difference is that I can launch a browser with multiple tabs loading simultaneously, and for that scenario (and for downloads) 3G is much faster.
Message was edited by: Lawrence Finch

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

What Speed could i get & what are the errors

Hi Everyone.
I have just joined B.T & yesterday was my last day of the 10 day period.
Bin looking at my speed it hasnt gone up alot but i keep getting all these errors on the hub info so i would like to ask what are the errors please & does the speed look about right for me thanks Nick..
Short time for connection as B.T reset the Hub its a v3.0a
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
1 days, 06:08:58
Downstream:
4.931 Mbps
Upstream:
1011 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
5.5 dB / 5.8 dB
Line attenuation (Down/Up):
46.4 dB / 27.7 dB
Output power (Down/Up):
18.5 dBm / 12.6 dBm
FEC Events (Down/Up):
126408871 / 3607
CRC Events (Down/Up):
102820 / 739
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
91458 / 730
Error Seconds (Local/Remote):
32083 / 501

Just enter your down attenuation here- http://www.kitz.co.uk/adsl/max_speed_calc.php there are things you can do to reduce errors like connecting to the master socket see if there is a difference, checking your wiring and housing of the hub etc. A explanation of errors here-http://www.kitz.co.uk/adsl/linestats_errors.htm
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

CS4 what 3D formats are accepted in Photoshop & After Effects?

Hello
I've trawled around the internet trying to find more information on what editable 3D file formats are accepted in Photoshop CS4 and After Effects.
Also does anyone know if you can import 3D file formats straight to A.E CS 4?
I use Cinema 4D to model so if anyone has any information on that specific program I would be grateful.
Thank you!
Chloe

dae, kmz, 3D Studio, Wavefront/OBJ, U3D and Google Earth 4 that I know of at the moment.

What types of movie files are accepted on the ipad2?

I am trying to trsnsfer movies to my itunes in order to transfer them onto my ipad2.
But when I look for the movies on my itunes I don't see any listed.
What types of movie file formats are accepted to transfer to the ipad2?

The Videos app supports these formats (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If you can't get them into your computer's iTunes then there are programs such as Handbrake (http://handbrake.fr) which might be able to convert them. If you can get them into your computer's iTunes but they then won't sync to the iPad, then you could try doing Advanced > Create iPad Version and see if that version syncs over.

What are acceptable speeds?

Similar Messages

Maybe you are looking for