What are all the designing steps to make printable puzzles?
The puzzles are usually the difficult task to perform.... While it is in printable form, how can add the designing steps to make it effective? Share your ideas....!
I'm not sure how the pieces themselves are created ( i.e., number of pieces and their shapes ). But, a die needs to be created in order to cut the pieces out of a thick card stock. The picture itself is, obviously, a photograph that is printed on a coated sheet and laminated to the card stock. So, the puzzle itself can be a layered Illustrator file with a Placed photograph. Your die cut stamp needs to be on a separate layer. Like that, see?
Similar Messages
-
What are all the basic steps required to configure PM?
Hi,
What are all the basic steps are required to configure PM Module in an company?
Could you please tell me in step by steps. This will help to get an idea and do the configuration in better way.
Awaiting for your replies...
Regards,
Althaf.Hi
This is very hard to explain in thread... It will be useful for you, if u read from this link...
This will have step by step procedure with respect to country
[Building Blocks|http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm]
Select your industry and the country... or just click Control + F and search for PM or Plant Maintenance
- Pithan -
How to identify what are all the errors appears in process chain,
Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
poojaHi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to 9999.
5. Repeat the ip.
6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
1. In order to handle this error you should be known to IP, info source and source system.
2. Goto RSA1, find the data source in the source sys tab.
3. Right click on the data source and replicate it.
4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
3. Goto update tab and select Initialize delta process try going for with data transfer.
4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
1. Goto info package via header or via RSA1.
2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
1. Goto maintain variant.
2. Check for the QM status of the requests in the target they should be green.
3. Then click the ODS activation tab.
4. In the screen which appears put the requests for which ODS activation failed.
5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
6. If requests are red then delete them from target.
7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
1. Click on the variant in which the error occurred.
2. Goto chain tab and copy the variant and instance.
3. Run the nestle provided program YBW05.
4. Put in info in there and put the status as g green.
5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
1. We can see the locked entries and in the transaction SM12.
2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
4. In the box appears select update in the background.
5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
1. Reload the Master Data manually again from Info-package at RSA1.
2. Release the Idoc.
3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
5. If status is Transaction executing then it means its fine wait.
6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
Reason: Sometimes we face that a load has failed due to job Termination at Source System.
This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1. Make the request red.
2. Delete the request from the data target.
3. Reschedule the ip.
4. If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu -
How to find what are all the rules and events are monitoring for specific server in SCOM 2007
how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
when s.HealthState = 1 then 'healthy'
when s.HealthState = 2 then 'Warning'
when s.HealthState = 3 then 'Critical'
else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName -
What are all the errors that can be corrected by using tran code rsrv?
hi all,,
what are all the errors that can be corrected by using tran code rsrv?
can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv.
regds
hariHi Kalyan,
I have urgent need of the RSRV DOCS.
Can you mail it to [email protected]
I will highly appreciate.
Thanks in Advance
SS
Points will be awarded -
What are all the ACLs being removed in permissions repair?
What are all the ACLs being removed in permissions repair? The last repair a few days ago removed gazillions of them, but the're back and being removed again. This makes "permissions repair" last about half an hour.
So what is an ACL, anyway?What are all the ACLs being removed in permissions repair? The last repair a few days ago removed gazillions of them, but the're back and being removed again. This makes "permissions repair" last about half an hour.
So what is an ACL, anyway? -
What are all the disadvantages of Crystal Xcelsius
what are all the disadvantages of Crystal Xcelsius
who Introduced Xcelsis
Which Company designed this software
what are all the advantages of Crystal Xcelsius
Applications
BenifitsHi,
Function modules are one element. There are no types. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.
There is no different function module types , but calling the function module will be different.
check this function calls syntax
1. Calls a function module:
- CALL FUNCTION func.
2. Call a function module in a different mode (asynchronous Remote Function Call):
- CALL FUNCTION func STARTING NEW TASK taskname.
3. Call a function module in the update task:
- CALL FUNCTION func IN UPDATE TASK.
4. Call a function module in a remote system (Remote Function Call, RFC ):
- CALL FUNCTION func DESTINATION dest.
5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):
- CALL FUNCTION func IN BACKGROUND TASK.
qRFC with output queue
6. Call a function module that can be activated in the context of enhancements:
- CALL CUSTOMER-FUNCTION func.
plz go through the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
Thanks,
Reward If Helpful. -
Dead-code elimination--what are all the rules?
This article http://www-128.ibm.com/developerworks/library/j-jtp12214/ has an entire section on dead-code elimination (DCE).
Does anyone know what all the criteria are by which the hotspot JIT compiler can determine that code is "dead"?
One obvious criteria is if the code will never get executed. I think that the canonical example is code like this:
static final boolean debug = false;
static void someMethod() {
if (debug) {
}Here, the compiler (javac as well as hotspot's JIT) can determine that someMethod has nothing inside it that could ever get executed, so it can be turned into an empty method.
If you look at that developerworks link above, he gives an even more interesting example for how hotspot's JIT can make sophisticated DCE based on inlining.
What I want to know is what are all the criteria that hotspot can use to decide that code is dead. Code that is never executed is always correct. But can it make more liberal decisions as to what counts as dead code?
Consider this code:
int[] foo = new int[1000];
int bar = foo.length;
// don't use foo again, but do use barA smart compiler could recognize that the array declaration and allocation is actually useless, and simply do
int bar = 1000;(Thank you Brian for this example.)What are the rules? Naturally, the only definitive answer can be given can be given by the HotSpot JIT.
That's not a very satifying answer, but it's true. The server JIT, like most compilers, has been taught hundreds and hundreds simplifying transformations that, in part, enable dead code elimination. Enumerating the criteria is a nearly impossible task.
But, your specific example is an interesting case.
int[] foo = new int[1000];
int bar = foo.length;For simplicity, I assume foo and bar are locals to a method, and in this case, the 6.0 HotSpot Server JIT will recognize that foo is unchanged before the initialization of bar, and effectively change it to:
int[] foo = new int[1000];
int bar = 1000;The JIT can't get rid of the allocation of the new array without a more advanced optimization called Escape Analysis, which attempts to determine the dynamic scope of objects. Of course, if these two lines comprise the whole method, then the analysis is fairly trivial.
Any intervening code will make the analysis more complex:
int[] foo = new int[1000];
baz(foo);
int bar = foo.length;
qux(foo);The calls sites will preclude your desired optimization, unless the called methods baz and qux can be inlined and analyzed. The code in baz can neither modify foo nor allow it to escape, and qux can not allow it to escape.
HotSpot's implementation of escape analysis is not quite yet complete, but should be available relatively soon. -
What are all the different Actions on Forms?
amazingly i can't find alot about this. i know theres mailto, but what are all the other actions on forms?
There's not much to it really.
<form action="URL-to-the-form-processing-script-on-your-web-server.php" method="post">
Form action property:
http://www.w3schools.com/jsref/prop_form_action.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
What are all the tables used for this report:
hi
what are all the tables used for this report:
report:
<b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
thanks in advanceTables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R -
CUBE - If it is not mandatory, what are all the things to compromise?
If having CUBE in Unified Communications infrastructure is not mandatory, what are all the things that needs to be compromised? I understrand CUBE provides security, interoperability and all.
If we don't have CUBE update installed in VoIP gateway, the coexistence of SIP and TDM trunking will not work? Please help me understanding this.Thanks Aaron.
So, you saying the calls from VoIP Phone -> CUCM->VoIP Gateway->SP via PSTN->Destination VoIP Gateway->Destination UCM->Phone doesn't require CUBE. In this case, the destination need not to be a SIP enabled device (need not to be a VoIP phone?)?
And for the calls from VoIP Phone->CUCM->VoIP Gateway->SP via SIP->Destination VoIP gateway->CUCM->VoIP Phone (Here destination phone is a SIP enabled device?). Let me know your comments please. -
How do we know what are all the fields updated in a screen?
Hi all,
If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b>
I want to write log file for the updated fields for that particular sales order.
<b> How do we know what are all the fields are updated ?</b>
If we can use SBOTransaction_Notification procedure.How to write code inside that.
Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
Please help me to solve this.Hope your reply soon
Regards,
V.RangarajanHi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps! -
What are all the fields covered in the Raw file received from the Card Co
Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1. Name of the Employee
2. Company ID
3. Credit card number
4. Currency
5. Amount
6. Exchange rate
7. Date of Transaction
8. Description
9. Document no.
10. Expense type
11. Expenses paid by company
Waiting for a positive response from your side
Regards,Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM -
How to find out what are all the change pointers assoicated for an idoc ??
Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
VarmaVerma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps.. -
What are all the features not supported in SQL Server 2012 trial version?
What are all the features not supported in SQL Server 2012 trial version?
The evaluation edition supports all features and expires after 180 days.
https://msdn.microsoft.com/en-us/library/cc645993.aspx?f=255&MSPPError=-2147217396
Maybe you are looking for
-
500k profile after disruption and new line install...
Hello, Status: I have an open fault logged with BT; Phone line ok but broadband speed low, profile appears stuck at 500k. History: sporadic BBand connection and noisy phone line followed by outright failure of both. Engineers visited and confirmed
-
I have lost my password how can i reset it?
i have an airport extreme. how can i reset the password?
-
Error When trying to load master data 0material
Hi, I got the following error when trying to laod 0MATERIAL master data "value '000000000004343434 ' for characteristic 0MATERIAL is in external format " "0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not val
-
I've been using Illustrator since version 8.0 and don't feel comfortable jumping over from version CS3 to CS4 or CS5, mainly because I find that "Smart Guides" (which is an option I relay on most of the time) have became less-Smart than they were in
-
Hello, I am using with MS SQL Server. I use for SELECT as pstmtSelect = conn.prepareStatement( "select Id, Description from Stock where Id = ?"); What is the syntax for using LIKE in the WHERE clause? ( I would like to use - WHERE Id LIKE ......?). T