What are all the improvements and Fixes in iOS 5.1?

I need to know what they are to find out if I really need an iPad 3 if I'm missing out.

Good post Allan, you're spot on.
As for 5.1, I've applied it to an iPad 2 and 4s and one thing I found so far is that I can now delete photos from Photo Stream. 
Not enough time with it yet to officially declare that my battery life has improved but I will say this:  My iPad has been in standby all day today, have not used it, and is still sitting at 100% battery life after about 24 hours since my last charge.  This "seems" like an small improvement but am not absolutely sure.  I guess I am lucky, I didn't seem to have the battery problems that many have reported with previous versions of iOS and hardware.  The 4s also seems to also have benefitted from slightly improved battery life.  I guess time will tell. 

Similar Messages

  • How to find what are all the rules and events are monitoring for specific server in SCOM 2007

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.
    Thanks for the question Sandoss. This is something that we all come across at sometime.
    Thanks & regards, Sumit Agrawal
    The lack of this feature is an inexcusable oversight for an enterprise management product.  They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down. 
    BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server. 
    The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well.  I'd like some feedback if something is missing.
    DECLARE @srv varchar(30)
    SET @srv = 'your name here'
    SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
    case
        when s.HealthState = 1 then 'healthy'
        when s.HealthState = 2 then 'Warning'
        when s.HealthState = 3 then 'Critical'
        else 'N/A'
    end as Health
    FROM state AS s WITH (NOLOCK)
    left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
    left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
    where
    bme.FullName like '%' + @srv + '%'
    and s.HealthState <> 0
    and mon.IsInternalRollupMonitor = 0
    and mon.IsExternalRollupMonitor = 0
    order by bme.DisplayName, mon.displayName

  • What are all the components and attrubutes of the SAP script

    hi
    what are all the components and attrubutes of the SAP script
    please reply
    thanks in advance

    Hello Ashok,
    The componest of the Script are:
    HEADER,PAGES,WINDOWS;PAGE WINDOW;PARAGRAPH FORMAT AND CHARACTER FORMATS.
    THE HEADER WILL HAVE THE ATTRIBUTES OF THE SAPSCRIPT LIKE
    DESCp.PAKAGES Etc.
    If useful reward points.
    Regards,
    Vasanth

  • In FF (30.0) Password Manager, when you open Edit, what are all the fields and how do you fill them in?

    When you open Edit, there are two choices: Web form and annotated.
    What is the difference?
    Then, there are fields for Host, Submit Prefix, Username, Password, etc.
    How do you fill in these fields?
    When you click to have the manager "Guess from Current Page," all fields don't necessarily get filled in, so is it just for username and password?
    I use the edit feature constantly, so it's a little odd not to see more detailed instructions here.
    When I click on Tools, the Saved Password Dialog is on the list, so it's on my toolbar all the time.
    I use it constantly.
    What is the latest in password security? I know there are competing ideas. What does Mozilla think?
    Thank you.

    Hmm, could this be a feature of your extension, "Saved Password Editor"? The support article ([[Password manager - Remember, delete and change saved passwords in Firefox]]) doesn't show those changes when I switch the version from 29 to 30 in the left column.

  • How to fetch what are all the tables used in this TR no and Package name of

    Hi Friends,
    I have input of Transport Request no (E070-TRKORR).
    How to fetch what are all the tables used in this TR no and Package name of this Table.

    HI,
    FYI
    SELECT E071OBJECT_NAME, E070MDEVCLASS
    FROM E071, E070M
    WHERE TRKORR = YOU REQUEST NO.

  • What are all the infotype need to maintain Indian Payroll and Time Mangnmt

    Hi Folks,
    My client wants to implement Indian Payroll and Time Management. we use +ve time management, -ve time management and also using CATS. its more of an indian payroll.
    Now can any one tell me what are all the infotypes i need to add.

    For Indian payroll :
    0580 Previous Employment Tax Details
    0581 Housing(HRA / CLA / COA)
    0582 Exemptions
    0583 Car & Conveyance
    0584 Income From Other Sources
    0585 Section 80 Deductions
    0586 Section 80 C Deductions
    0587 Provident Fund Contribution
    0588 Other Statutory Deductions
    positive time management mandatory infotypes:
    0050 time data recording
    2011 time events
    2010 time remuneration wage types
    updations:
    2001 absence
    2002 attendances
    2003 substitutions
    2006 absence quotas
    For CATS -infotype0315

  • What LDB is and what are all the events we have in that..?

    Hi,
    Kindly let me know what LDB is and what are all the events we have in that..?
    Akshitha.

    Hi akshitha,
    1. A logical database is in fact
    a program only.
    2. This LDB provides two main things :
    a) a pre-defined selection screen
    which handles all user inputs and validations
    b) pre defined set of data
    based upon the user selection.
    3. So we dont have to worry about from
    which tables to fetch data.
    4. Moreover, this LDB Program,
    handles all user-authorisations
    and is efficient in all respects.
    5. tcode is SLDB.
    1. To get a taste of it.
    2. create a new z program.
    3. while creating type PNP
    in logical database field.
    4. paste this code and execute.
    REPORT ABC.
    infotypes : 0001.
    TABLES : PERNR.
    GET PERNR.
    WRITE :/ PERNR-PERNR.
    5. The selection screen which u see
    is coming from logical database PNP program.
    6. Execute
    7. U will get a list of pernr.
    SAPDBPNP
    this is the main program of LDB PNP
    which does the main work.
    SAPDB + ldb name.
    regards,
    amit m.

  • What are all the objects can be imported  and exported...

    Hi all,
    what are all the objects can be imported ..
    and what are all objects exported....in XI..
    and what is context objects and logical routing..
    Cheers,
    Raghavesh

    Hi,
    Your question 1 is not very clear. Are you taking about Export and Import under TOOLS --> EXPORT / IMPORT? If yes, all objects created in the IR and ID can be exported and improted. They are used for moving your objects from one environement to another .TPZ files.
    Individual Objects that can be improted in the IR  are those that come under
    1. External Definitions --> XSD, WSDL, DTD which acts
    as the message types.
    2. Idocs and RFC's.
    3. Imported Archives -->External Mapping progrars ( Java and XSLT ) , external .jar files etc.
    Context objects is nothing but to put in simple words an XPATH. At times XPATH can become too long and complex and to avoid typing them at different places, you create CONTEXT Objects for these path and then use them.
    Logical Routing refers to Conditional Receievr / Interface Determination where on the basis on some conditoon your target Recievr / Interface is determined.
    Regards,
    Bhavesh

  • IS - Retail, What are all the version currently available and what is lates

    Hi,
    What are all the version currently available and what is latest version?
    Regards

    Hi akshitha,
    1. A logical database is in fact
    a program only.
    2. This LDB provides two main things :
    a) a pre-defined selection screen
    which handles all user inputs and validations
    b) pre defined set of data
    based upon the user selection.
    3. So we dont have to worry about from
    which tables to fetch data.
    4. Moreover, this LDB Program,
    handles all user-authorisations
    and is efficient in all respects.
    5. tcode is SLDB.
    1. To get a taste of it.
    2. create a new z program.
    3. while creating type PNP
    in logical database field.
    4. paste this code and execute.
    REPORT ABC.
    infotypes : 0001.
    TABLES : PERNR.
    GET PERNR.
    WRITE :/ PERNR-PERNR.
    5. The selection screen which u see
    is coming from logical database PNP program.
    6. Execute
    7. U will get a list of pernr.
    SAPDBPNP
    this is the main program of LDB PNP
    which does the main work.
    SAPDB + ldb name.
    regards,
    amit m.

  • What are all the tables used for this report:

    hi
    what are all the tables used for this report:
    report:
    •     <b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
    thanks in advance

    Tables: MSEG, MKPF, MARD.
    FOR REFERENCE SEE TRANSACTION : MB5B.
    Message was edited by: Sharath kumar R

  • CUBE - If it is not mandatory, what are all the things to compromise?

    If having CUBE in Unified Communications infrastructure is not mandatory, what are all the things that needs to be compromised? I understrand CUBE provides security, interoperability and all.
    If we don't have CUBE update installed in VoIP gateway, the coexistence of SIP and TDM trunking will not work? Please help me understanding this. 

    Thanks Aaron. 
    So, you saying the calls from VoIP Phone -> CUCM->VoIP Gateway->SP via PSTN->Destination VoIP Gateway->Destination UCM->Phone doesn't require CUBE. In this case, the destination need not to be a SIP enabled device (need not to be a VoIP phone?)?
    And for the calls from VoIP Phone->CUCM->VoIP Gateway->SP via SIP->Destination VoIP gateway->CUCM->VoIP Phone (Here destination phone is a SIP enabled device?). Let me know your comments please.

  • How do we know what are all the fields  updated in a screen?

    Hi all,
             If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b> 
             I want to write log file for the updated fields for that particular sales order.
             <b> How do we know what are all the fields are updated ?</b>     
             If we can use SBOTransaction_Notification procedure.How to write code inside that.
             Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
             Please help me to solve this.Hope  your  reply soon
    Regards,
    V.Rangarajan

    Hi, V.Rangarajan!
    When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
    if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
    string ChangedColumnID = pVal.ColUID;
    int ChangedRowNumber = pVal.Row;
    and write the values to your log.
    "38" - is the matrix ID in the Orders form
    "139" - is the Orders form
    Also you can access to the value, that user had put into the field.
    Hope this helps!

  • What are all the features not supported in SQL Server 2012 trial version?

    What are all the features not supported in SQL Server 2012 trial version?

    The evaluation edition supports all features and expires after 180 days.
    https://msdn.microsoft.com/en-us/library/cc645993.aspx?f=255&MSPPError=-2147217396

  • How to identify what are all the events are created in background jobs?

    Hi all,
    how to identify what are all the events are created for  background jobs. And what events gets triggered for a particular job.
    thanxs
    haritha

    Hi Haritha,
    JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
    Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
    Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
    Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    Use
    As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
    Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
    About Events:
    Events have meaning only in the background processing system. You can use events only to start background jobs.
    Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
    Types of Events:
    There are two types of events:
    1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
    2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
    For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
    You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
    When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
    1. Immediate
    2. Date & Time
    3. After event.
    4. After job.
    5. At Operation mode.
    In case you want to view the job logs go to sm37.
    Also Pls check DB02 for database performance and ST03 for workload .
    Analyse u will have an idea ,
    *pls assign points,if info is useful**
    Regards
    CSM reddy
    null

  • How to identify what are all the errors appears in process chain,

    Hi all,
    i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
    thanks
    pooja

    Hi Pooja,
    Errors in monitoring:
    SID error
    Reason: If the corresponding master data is missing for the particular transaction data.
             1. Check for the load timing for the respective master data, if it less than an hour  then make the request red and repeat the ip.
             2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
             3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with ‘Single as postfix’.
             4. Goto ‘data selection’ tab and change the range.
    Tip: change the last 4 digits for from to ‘0000’and the last 4 digit for to     ‘9999’.
            5. Repeat the ip.
             6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
    Note: IF PSA is present never make the request red rather delete it.
    Replication error
    Reason: Data source replication Failed.
             1. In order to handle this error you should be known to IP, info source and source system.
             2. Goto RSA1, find the data source in the source sys tab.
             3. Right click on the data source and replicate it.
             4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
             5. Delete the ‘red’ request from the target.
    Update R not supported
    Reason: The corresponding initialization flag for the ip is lost.
             1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
             2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
             3. Goto update tab and select ‘Initialize delta process’ try going for ‘with data transfer’.
             4. Reschedule the IP.
    Duplicate Record Error
    Reason: Duplicate error records for the loaded master data.
             1. Goto info package via header or via RSA1.
             2. Goto ‘processing tab’ and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
             3. Do remember to change the ip settings back to the original once after the second step.
    ODS activation failure
    Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
             1. Goto ‘maintain variant’.
             2. Check for the ‘QM’ status of the requests in the target they should be green.
             3. Then click the ODS activation tab.
             4. In the screen which appears put the requests for which ODS activation failed.
             5. Activate these and keep on refreshing them until status reverts from green,
    Remember to refresh these requests one at a time.
             6. If requests are red then delete them from target.
             7. Reschedule the IP.
    Note: Never Try activating ODS manually if it is Y1.
    Aggregate Rollup error
    Reason: No aggregate found for the respective rollup.
             1. Click on the variant in which the error occurred.
             2. Goto chain tab and copy the variant and instance.
             3. Run the nestle provided program YBW05.
             4. Put in info in there and put the status as g – ‘green’.
             5. Execute and refresh the status.
    Lock issue
    Reason: The same ip is been locked by other user or may be used by other process chain.
             1. We can see the locked entries and in the transaction SM12.
             2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
             3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
             4. In the box appears select update in the background.
             5. And the manually update the failed IP’s by selecting manual update in the context menu.
    Alfa confirming value error, Time conversion error, Chain didn’t start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
    Reasons:
      Alfa confirming error: Data format mismatch.
      Time conversion error: Date, time format mismatch.
      Chain didn’t start: A scheduled chain didn’t triggered at the prescribed timing.
    -For all the above error we have to raise a ticket.
    Idoc or TRFC error
    Reason: An Idoc is been stuck somewhere.
             1. Reload the Master Data manually again from Info-package at RSA1.
             2. Release the Idoc.
             3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
             4. In the Screen if the status is ‘Transaction Recorded’ it means its stuck goto edit and click Execute LUW or press F6.
             5. If status is ‘Transaction executing’ then it means its fine wait.
             6. Or raise ticket.
    Error Due to short Dump
    Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
    Process terminated in the Source system.
               Reason: Sometimes we face that a load has failed due to job Termination at Source System.             
          This happens due to unavailability of the source system or some connectivity problem between source and target systems.
    1.      Make the request red.
    2.      Delete the request from the data target.
    3.      Reschedule the ip.
    4.      If still the job fails raise the ticket.
    And also check in following links:
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    For Data Load Errors check this blog:
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    Pls assign points if it helps u,
    Thanks & Regards,
    Madhu

Maybe you are looking for

  • Oracle9i Installation on SuSe Linux 7.3 Professional Edition

    Hi, I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following st

  • A string into a fixed sized array.

    Hello; I am tryig to implement a method that consumes a string that is made up of possible integers (for example String s = "1 2 3 4 5"; ) and returns it as an array such that the returned array will be {1,2,3,4,5} with size 5. This means it has to p

  • Attach to email freezes session

    Environment: Server 2003 SP2 Citrix Presentation Server Ver 4.5.1 Outlook 2003 SP3 Acrobat Reader  Ver 9.1.3 CITRIX SESSION FREEZES WHEN SENDING EMAIL WITH PDF ATTACHMENT FROM ACROBAT READER User opens PDF email attachment in Outlook. Acrobat Reader

  • Question on Start up disk

    I was downloading a movie onto my G4 laptop and it stopped about half was through and posted a notice that "start up disk is almost full" and it gave instruction to empty the trash and also delete some files. So I took some TV shows off and emptied t

  • Get dir listing in servlet

    Hi all, I have a problem with a servlet: I am trying to get a String array of all the filenames in a directory. Is this possible in a servlet? I am using tomcat 5.0. this is my code so far:         ServletContext context = getServletContext();