What are all the major SPRO parameters available for MRP run in SAP.
Dear Frndz,
What are all the major SPRO parameters available for MRP run in SAP.
Regards,
Srini
Hi,
For MRP, the main Customization settings involved are:
1. Activate MRP and Set Up Planning File - OMDU
2. Define Parallel Processing in MRP - OMIQ
3. Define Scope of Planning for Total Planning - OMIZ
If you want to use MRP Areas and include this in Scope of Planning then.
1. Activate MRP for MRP Areas
2. Define MRP Areas - OMIZ
With MDBT of Program : RMMRP000 you can schedule the Background MRP Run. (with a variant)
If you need any any specific information please inform..
Regards,
Siva
Similar Messages
-
What are all the subjobs that get called for when a load is scheduled.
Can any one please tell me - "when I schedule a load to my Infocube or ODS or other data target, what are all the sub jobs/requests that get called for? Like if I go and see in Tcode SM37, I see several jobs running. Any input is greatly rewarded. Thankyou!!!!
Hi,
Adding to what is mentioned above, if its scheduled if its a BW datamart load scheduled in background you can see that in SM37 job log (give BIrequest name) (In source system if load is from R/3) and it should give you the details about the request.
SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
Also try SM50/SM51 to find that job.
Try RSMO from the Infopackage monitor.
Thanks,
JItuK -
I was making an investigation into what I needed to make a bit of a bit of a hybrid between my musical inteface and the mac book pro 13...I looking for the macbook to just hold and processes the application i require to perform live music, in this case the software max msp. I was looking for peoples opinions on what risks im taking just powering the motherboard of the model and have people had experience of reconstructing the mashine, what sort of things did they discover.
Thank you very much for reading, I will very very much appreciate any reponce from people
JoelYou've got it right. The SSD can be upgraded, though it's expensive and potentially voids the warranty. The RAM can't be upgraded at all.
Can you return it? If not, your only option may be to sell it. -
What are all the Softwares i can install on Solaris 8
Hi,
Can anyone tell me what are all the Softwares i can install on Solaris Machine.
If I want to develop a web Based appalication what are the necessary things i have to do.
What are all the major application can develop?.
Is there any already Developed site or some demo which we can see online?
I will be very thankful i you provide some related information regarding this.
THanks in Advance.Hi,
You can check out http://soldc.sun.com website and select Software.
This list the categories of Sun Software, freeware, Web Start Wizard
much more information.
...jagruti -
What are all the certifications should i do?
Hii friends,
I introduce myself as a newbie in dis world of oracle plsql.Me having a experience of 2.5yrs in various but with a relevant exp of 6months on oracle10g plsql.And I think its the time for me to concentrate on doing certifications.
1) Could you folks can list out me what are all the certification should i go for.
2)And the books should I buy ????
3)Sites that provide mock exams????
I desperately need your valuable suggestions.
Edited by: user13310481 on Jun 23, 2010 10:53 PMuser13310481 wrote:
Hii friends,
I introduce myself as a newbie in dis world of oracle plsql.Me having a experience of 2.5yrs in various but with a relevant exp of 6months on oracle10g plsql.And I think its the time for me to concentrate on doing certifications.
1) Could you folks can list out me what are all the certification should i go for.
2)And the books should I buy ????
3)Sites that provide mock exams????
I desperately need your valuable suggestions.
Please start reading the following articles
http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html
http://forums.oracle.com/forums/ann.jspa?annID=794
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/ -
What are all the E-Modules available in SAP HR
Hi
Please let me know what are all the e-modules (e-recruitment, e-travel....) available in SAP HR
Thanks
ManianHi,
Almost all the Modules of SAP HR has Web Applications. We have ESS/MSS applications for Personnel Administration, Personnel Management, Travel, Training And Event Management (LSO), Time Management & Recruitment.
Regards,
Suba -
IS - Retail, What are all the version currently available and what is lates
Hi,
What are all the version currently available and what is latest version?
RegardsHi akshitha,
1. A logical database is in fact
a program only.
2. This LDB provides two main things :
a) a pre-defined selection screen
which handles all user inputs and validations
b) pre defined set of data
based upon the user selection.
3. So we dont have to worry about from
which tables to fetch data.
4. Moreover, this LDB Program,
handles all user-authorisations
and is efficient in all respects.
5. tcode is SLDB.
1. To get a taste of it.
2. create a new z program.
3. while creating type PNP
in logical database field.
4. paste this code and execute.
REPORT ABC.
infotypes : 0001.
TABLES : PERNR.
GET PERNR.
WRITE :/ PERNR-PERNR.
5. The selection screen which u see
is coming from logical database PNP program.
6. Execute
7. U will get a list of pernr.
SAPDBPNP
this is the main program of LDB PNP
which does the main work.
SAPDB + ldb name.
regards,
amit m. -
What is Reservations in MM & what are all the settings?
Hi SAP Experts,
What is Reservation? what are all the configuration settings needs to be done to implement Reservations?
can you please help me out by giving detailed information about Reservation?
Kindly do on priority basis
Regards,
SomuHi
Not much configuration is required for reservations.
In IMG -- MM -- Inventory and phy inventory management -- define default values
Here you need to mention number of days within movement allowed will activate automatically for eacha plant.
No. of days the reservation can be retained without deletion
Dyanic availability check: Here you can mention avalability check requirement during Goods movements.
Reservations:
It is a simple MM functionality, here based on the requirement different user departments will create the reservation for future required dates.
That will help procurement departments to plan for the materials as well accountability of various goods issues.
Same can be done through MB21, MB22 for create and change respectively.
Regards,
Krish -
What are all the key words are not recommented in User Exit or Enhancement
Dear Experts,
Can any of one tell me, what are all the key words not recommended to use any of the User exit or Enhancement spots?
Regards,
Mohana
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Feb 22, 2011 4:10 PMNo Icon:Visitor
Student
Honor Student
Top Student
Tutor
Intern
Teacher
Grad Student
Master’s Graduate
PhD Student
Associate Professor
Professor
Distinguished Professor
Regents Professor
Associate Dean
Dean
Provost
FONDA X. COX, PhD -
Dead-code elimination--what are all the rules?
This article http://www-128.ibm.com/developerworks/library/j-jtp12214/ has an entire section on dead-code elimination (DCE).
Does anyone know what all the criteria are by which the hotspot JIT compiler can determine that code is "dead"?
One obvious criteria is if the code will never get executed. I think that the canonical example is code like this:
static final boolean debug = false;
static void someMethod() {
if (debug) {
}Here, the compiler (javac as well as hotspot's JIT) can determine that someMethod has nothing inside it that could ever get executed, so it can be turned into an empty method.
If you look at that developerworks link above, he gives an even more interesting example for how hotspot's JIT can make sophisticated DCE based on inlining.
What I want to know is what are all the criteria that hotspot can use to decide that code is dead. Code that is never executed is always correct. But can it make more liberal decisions as to what counts as dead code?
Consider this code:
int[] foo = new int[1000];
int bar = foo.length;
// don't use foo again, but do use barA smart compiler could recognize that the array declaration and allocation is actually useless, and simply do
int bar = 1000;(Thank you Brian for this example.)What are the rules? Naturally, the only definitive answer can be given can be given by the HotSpot JIT.
That's not a very satifying answer, but it's true. The server JIT, like most compilers, has been taught hundreds and hundreds simplifying transformations that, in part, enable dead code elimination. Enumerating the criteria is a nearly impossible task.
But, your specific example is an interesting case.
int[] foo = new int[1000];
int bar = foo.length;For simplicity, I assume foo and bar are locals to a method, and in this case, the 6.0 HotSpot Server JIT will recognize that foo is unchanged before the initialization of bar, and effectively change it to:
int[] foo = new int[1000];
int bar = 1000;The JIT can't get rid of the allocation of the new array without a more advanced optimization called Escape Analysis, which attempts to determine the dynamic scope of objects. Of course, if these two lines comprise the whole method, then the analysis is fairly trivial.
Any intervening code will make the analysis more complex:
int[] foo = new int[1000];
baz(foo);
int bar = foo.length;
qux(foo);The calls sites will preclude your desired optimization, unless the called methods baz and qux can be inlined and analyzed. The code in baz can neither modify foo nor allow it to escape, and qux can not allow it to escape.
HotSpot's implementation of escape analysis is not quite yet complete, but should be available relatively soon. -
What are all the tables used for this report:
hi
what are all the tables used for this report:
report:
<b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
thanks in advanceTables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R -
CUBE - If it is not mandatory, what are all the things to compromise?
If having CUBE in Unified Communications infrastructure is not mandatory, what are all the things that needs to be compromised? I understrand CUBE provides security, interoperability and all.
If we don't have CUBE update installed in VoIP gateway, the coexistence of SIP and TDM trunking will not work? Please help me understanding this.Thanks Aaron.
So, you saying the calls from VoIP Phone -> CUCM->VoIP Gateway->SP via PSTN->Destination VoIP Gateway->Destination UCM->Phone doesn't require CUBE. In this case, the destination need not to be a SIP enabled device (need not to be a VoIP phone?)?
And for the calls from VoIP Phone->CUCM->VoIP Gateway->SP via SIP->Destination VoIP gateway->CUCM->VoIP Phone (Here destination phone is a SIP enabled device?). Let me know your comments please. -
How do we know what are all the fields updated in a screen?
Hi all,
If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b>
I want to write log file for the updated fields for that particular sales order.
<b> How do we know what are all the fields are updated ?</b>
If we can use SBOTransaction_Notification procedure.How to write code inside that.
Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
Please help me to solve this.Hope your reply soon
Regards,
V.RangarajanHi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps! -
What are all the fields covered in the Raw file received from the Card Co
Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1. Name of the Employee
2. Company ID
3. Credit card number
4. Currency
5. Amount
6. Exchange rate
7. Date of Transaction
8. Description
9. Document no.
10. Expense type
11. Expenses paid by company
Waiting for a positive response from your side
Regards,Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM -
How to find out what are all the change pointers assoicated for an idoc ??
Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
VarmaVerma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps..
Maybe you are looking for
-
Disable SSD cache in Windows on W540?
I just received my W540, which came with the micro SSD cache drive. I'm dual booting my machine with Linux, and intend to use the micro SSD with the bcache Linux kernel module, which assumes it has exclusive use of the cache device, even through rebo
-
Why need to link credit memo with invoice
Hi, gurus, I received an AP invoice valued $2222 and then received a credit memo valued $222 about 1 week later. Now I need to make payment. I was told it's good to link credit memo with invoice by entering invoice number in the field "invoice refere
-
Vendor request approved and then denied
Hi, I registered in Vendor portal recently...I got a mail after that , asking some document verfication..I sent a scanned copy of my driving license... Within a few minutes , i got a mail saying VENDOR APPROVED..Then after a few mins, i got a mail sa
-
"private" folder on root directory of hard drive???
Ever since I resored my system using TimeMachine I've noticed now I have a "private" folder on my hard drive that wasn't there before? Is it safe to delete it, because whatever it is, I don't want it where it is. - I want it like before when whatever
-
Prepare statement to insert a row that contains Blob column. Which way is correct?
When we make prepare statement to insert a row that contains Blob column. Which way is correct? And what is the difference? Does anyone know? 1. Preparestatement.setBlob(parameter number, blob type object) 2. Preparestatement.setBlob(param