What are all the patches for Sun C++ 5.8

Hi
Will you Let me know all the Patches for CC: Sun C++ 5.8 2005/10/13 on Solaris 5.8 Sparc
Please provide the URL
Regards
Revathi R

Initial releases of Studio are free, but patches require an Oracle support contract.
You can get information about patches and support at My Oracle Support (MOS):
http://support.oracle.com/

Similar Messages

Screensavers, what are all the options for?

I recently got and 2nd generation apple tv. I'm a little bit confused about the Screensavers list available under settings > Screen Saver > screen savers. I man there is a lists of Screensavers there: random, flip-up, floating, holiday mobile and so on. I though that these were different effects for showing the pictures; however I have selected some of them and the Screensaver is always the same, all the pictures slowly flying bottom up. So, can someone explain what are these for?
Thanks!

Yeah, I have tried that. For everyone to know, my screensaver settings are as follows:
Start after: 2 minutes
Show during music: Yes
Photos: my library
Screensavers: any, I have tried them all
After selecting any of them I have tried both, previewing and waiting until it shows, the result is always the same; photos flying slowly from the bottom to the top.

What are all the tables for when you create a queue?

I'm just getting started with Advanced Queuing on 9i db.
When I create a queue table, I noticed that server other
tables are created at the same time, with the following appended to the original table name: H, I, NR, S, _T
Some of them are also indexed. I figured out that the _S
version is for the subscribers, what are the others?
Thanks,
Tim

I'm just getting started with Advanced Queuing on 9i db.
When I create a queue table, I noticed that server other
tables are created at the same time, with the following appended to the original table name: H, I, NR, S, _T
Some of them are also indexed. I figured out that the _S
version is for the subscribers, what are the others?
Thanks,
Tim

What are all the buttons for on my x201?

I recently purchased an x201 Tablet multitouch (2 fingers and pen), and I absolutely love it. I was wondering if anyone can point me to where I can find a users guide for my new toy. Specifically, the fn combo actions. I purchased it refurbished and I think that I may have mobile broadband, but I'm not able to tell. Any suggestions on how to find that out? Thanks in advance!
Solved!
Go to Solution.

Here's the manuals for your system.The hardware and maintenance manual will show you where everything is. You should have a simm card slot on your machine. You'll need to know the complete model number that's on the bottom of your laptop in order to find out whether you have broadband or not.
http://www-307.ibm.com/pc/support/site.wss/product.do?subcategoryind=0&familyind=512259&brandind=10&...
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

What are all the settings for getting mean ,St.deviation & CP & CPK value

Dear All.
What settings i need to do for getting mean , standard deviation , CP & CPK values in standard reports of QM.
like MCVD.
Rgds,
Mani

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

What are all the tables used for this report:

hi
what are all the tables used for this report:
report:
Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.
thanks in advance

Tables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R

Iphotos Package Contents: What are all these folders for? Is it too large to back up in the cloud?

Dear experts, I am quite a newbie when it comes to understanding the Mac filing system, as I originally came from the PC world. There's lots of things I dont understand in the iMac file viewer and how to organise and backup my photos is an important issue for me.
I know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Question 1 - What are all these folders for?
Please can someone explain what is the difference between all the folders I see? Some of them seem to be exact duplicates of the others e.g. Masters, Modified and Originals all seem to have the same content. So here is a list of folders that I see. What is in them?, or what is their purpose?
Data
Data.noindex
Modified
Originals
Apple TV Photo Cache
Attachments
Auto Import
Backup
Caches
Contents
Database
iLifeShared
iPod Photo Cache
Masters
Previews
ProjectCache
Thumbnails
Question 2 - Which photo folder should I back-up?
If I want to keep a physical backup of my photos, which of the above folders should I copy to an external hard drive? (I use Get Backup to automatically copy all important new or changed files to an external drive)
Question 3 - Using the cloud: What is the best way to backup my large photo library in the cloud safely?
I would like to have some kind of safe backup in the cloud for my photos. However the size of the iphoto library is huge at 165GB. Even the Masters folder is huge. It is 130GB. Is it possible to back up files of this size in the cloud? I have a couple of services called photo streaming and Dropbox, but they don't seem to be able to handle this kind of size. Photo streaming only works with 1000 photos (as far as I can tell), and my Dropbox probably has a limit too. I guess it's about 5GB. I am already using about 3GB of my Dropbox space for other files. I would consider both paid and free solutions.
Many thanks to all the experts for your help!

know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Don't do that. That's like opening the hood of your car and trying to figure out what all the different bits and peices are and which you can yank out and dispose of. Simply, there are no user-serviceable parts in here.
So, your Question 2:
You back up the iPhoto Library as a single unit.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
Your question 3:
There is no good back up to the Cloud. There are a couple of reasons for this. One is that the datasets are so large and the cloud services shapre their download speeds. This means restoring can take days to complete. Then, and this is the big problem, the iPhoto Library needs to sit on a disk formatted Mac OS Extended (Journaled). Bluntly, no servers online are formatted appropriately, and if the Library is written to - by an incremental back up, for instance - there is a very high likelihood that the library will be corrupted.
Your Question 1:
The Library you're describing there sounds like one that has been updated a few times. Not everything you list there is a folder. Some will be aliases.
The Data folders hold thumbnails.
The Masters and Originals folders hold the files as imported from the camera
The Previews hold the versions of the edited photos that are accessed via the Sharing mechanism.
I think if you look losely that you'll notice that one of the Data folders and one of either the Masters or the Originals folders is actually an alias.
Everything else is a database or cache file of some form. All are required for iPhoto to work.
As an FYI:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode BD50
Use tcode BD61 to check whether change pointers are active or not??
Hope this helps..

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
 when s.HealthState = 1 then 'healthy'
 when s.HealthState = 2 then 'Warning'
 when s.HealthState = 3 then 'Critical'
 else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

What are all the major SPRO parameters available for MRP run in SAP.

Dear Frndz,
What are all the major SPRO parameters available for MRP run in SAP.
Regards,
Srini

Hi,
For MRP, the main Customization settings involved are:
1. Activate MRP and Set Up Planning File - OMDU
2. Define Parallel Processing in MRP - OMIQ
3. Define Scope of Planning for Total Planning - OMIZ
If you want to use MRP Areas and include this in Scope of Planning then.
1. Activate MRP for MRP Areas
2. Define MRP Areas - OMIZ
With MDBT of Program : RMMRP000 you can schedule the Background MRP Run. (with a variant)
If you need any any specific information please inform..
Regards,
Siva

What are all the subjobs that get called for when a load is scheduled.

Can any one please tell me - "when I schedule a load to my Infocube or ODS or other data target, what are all the sub jobs/requests that get called for? Like if I go and see in Tcode SM37, I see several jobs running. Any input is greatly rewarded. Thankyou!!!!

Hi,
Adding to what is mentioned above, if its scheduled if its a BW datamart load scheduled in background you can see that in SM37 job log (give BIrequest name) (In source system if load is from R/3) and it should give you the details about the request.
SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
Also try SM50/SM51 to find that job.
Try RSMO from the Infopackage monitor.
Thanks,
JItuK

What are all the Standard Data targets&Data source for Warehouse management

Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

CUBE - If it is not mandatory, what are all the things to compromise?

If having CUBE in Unified Communications infrastructure is not mandatory, what are all the things that needs to be compromised? I understrand CUBE provides security, interoperability and all.
If we don't have CUBE update installed in VoIP gateway, the coexistence of SIP and TDM trunking will not work? Please help me understanding this.

Thanks Aaron.
So, you saying the calls from VoIP Phone -> CUCM->VoIP Gateway->SP via PSTN->Destination VoIP Gateway->Destination UCM->Phone doesn't require CUBE. In this case, the destination need not to be a SIP enabled device (need not to be a VoIP phone?)?
And for the calls from VoIP Phone->CUCM->VoIP Gateway->SP via SIP->Destination VoIP gateway->CUCM->VoIP Phone (Here destination phone is a SIP enabled device?). Let me know your comments please.

How do we know what are all the fields updated in a screen?

Hi all,
 If i am making modifications in row details of sales order screen .for eg, i am changing the quantity or price for a row
 I want to write log file for the updated fields for that particular sales order.
 How do we know what are all the fields are updated ?
 If we can use SBOTransaction_Notification procedure.How to write code inside that.
 Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
 Please help me to solve this.Hope your reply soon
Regards,
V.Rangarajan

Hi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps!

What are all the patches for Sun C++ 5.8

Similar Messages

Maybe you are looking for