What are apple's specifications for acceptable performance

I sent my ipod in for service because it's freezing up on me; on a daily basis... and all i get back is a letter telling me that my ipod is within apple's specifications for acceptable performance. In addition to telling me they've done everthing I've already done to try to resolve my problem. But for some stange reason they never stated what apple's specifications for acceptable performance are. Not to mention you can't find any information on thier website. Anybody know where I can find this information..

Welcome to Apple Discussions!
If the iPod is doing as you say, then it is not fine and Apple should repair it.
However, Apple may not have found something in the hardware that is wrong with the iPod.
Have you tried updating and restoring the iPod before?
iTunes
iPod Updater
Updating iPod's Software
To Restore...
Restore the iPod
If none of the above works, you may want to call Apple and explain what is wrong and what you have tried. Ask why it was not repaired...
Apple Phone Numbers
btabz

Similar Messages

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

What are the system requirements for apple itunes 11.1?

what are the system requirements for apple itunes 11.1?

For Mac:
http://support.apple.com/kb/SP663
Software:
Mac OS X version 10.6.8 or later (intel-based hardware)
400MB of available disk space
iTunes in the Cloud and iTunes Match availability may vary by country.
Hardware:
Mac computer with an Intel Core processor and 512MB of RAM
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
Broadband Internet connection to use the iTunes Store
Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
But it won't work in a power-pc architecture Mac... see specifications:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Hopefully this helps.
Good luck & happy computing!

What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?

I have noticed damage caused by the bumper.
It is NOT foreign object but caused by the hard plastic on the inside of the bumper
(plese do not come out with rubbish like steel is harder than plastic) I am not stupid and I know that the damage matches the pattern of the bumper skeleton.
What I want to know is when are Apple going to deal with this and replace my phone?
I dare not go to the so called Genius bar in Milton Keynes as they have adopted a Dixons style "fob off" attitude and I will become rather angry with them.

Re: What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?
15-Jun-2011 15:15 (in response to sfrommilton keynes)
o Steel is harder than plastic, so the bumper has not caused the damage.
- You call it rubbish
- The world calls it physics
You are totally wrong. Please go back to School.
o You can deny physics
- but that will not change reality.
You can go to School but that wont change reality.
o Your description of your Genius bar is incomprehensible
- I recommend you go to the Genius bar leaving the chip on your shoulder at home and tactfully explain what you think is your issue.
I recomend you find a day job ans stop TROLLING peoples threads.
- I've never had them fail me or be the least bit confrontational.
- But if you act like a jerk then I couldn't predict what would happen
Yeah because you were there. Are you having some kind of relationship with the company? I think you sleep with an Apple under your pillow.
Finally I am a consumer who has paid for a product that is not living up to expectations. The plastic skelton is hard and abrasive (I know what that means as I went to School) Abrasion's are marking the product.
This is not the only time this has been reported and as such I have no issue with particles entering the bumber. This has happened from the start (when I used Apples stupid bumber case)
Please don't patronise or TROLL others threads.
<Edited by Host>

What does Apple mean by "For best battery performance, leave your device connected to a power source until the restore is complete."

I just recently returned an IPad air and exchanged it for another. I first set up this new one as a new IPad but then deleted all content and settings right away (since I wasn't getting the progress I had made in apps and games) in order to restore it from my previous IPad Air. I then checked after on how to backup via icloud and saw this line under the subtitle of how to restore from a backup, "For best battery performance, leave your device connected to a power source until the restore is complete." What does Apple mean by "for best battery performance"? Im just a bit worried of issues.
p.s. And yes I did have it connected to the power. And the ios is the default ios for new IPad Airs.

Welcome to the Apple Community.
It only means you should restore whilst it is connected to a power supply, so that your battery doesn't go flat during the process.

My iPhone 4G won't pair to my Acura TL after an update. Others are also having the same proble. What is Apple's fix for this?

My iPhone won't pair to my Acura TL's Bluetooth. It worked fine when i first got it, and my iPhone 3GS paired flawlessly. Other on the 'Net have posted that their 4G won't pair with Bluetooth devices after the 4.0 update. What is Apple's fix for this?

Actually, I don't let the phone discharge as a matter of habit. But you know you cant always get the charger to the phone in time, especially if you leave the house for more than a few hours. So now and then the battery dies. And doesn't Apple recommend completely discharging then recharging the phone from time to time.
Anyway, the network here is solid. Like I said, this is a problem since I updated to ios7 and only occurs when the battery is discharged. It's a phone issue, not a carrier one.

What are the steps needs to be perform to define a data model

What are the steps needs to be perform to define a data model
a. Information Gathering
b. Hardware & Software
c. Structure the Information MDM
d. Transfer into a Physical Model BW data model
e. Explore use of existing model Business Content

Hi Siva,
 Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.

Project Preparation
Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
Blue Print
Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
 By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
Realization Phase
Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
Testing
 Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
Go live
Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after it will be transitoned to support team.
Hope It helps you.
Assign Points if it usefull
Regards
Sujan

FAQ: What are the system requirements for GroupPix?

FAQ: What are the system requirements for GroupPix?
Answer:
iOS: minimum iOS version is 6.0 GroupPix 1.x runs on iPhone 4, 4s, iPhone 5, or iPod touch (5th generation or later)
Android: minimum OS version 4.0 GroupPix 1.x is designed for Android phones
Message was edited by: Pattie F 11/7/13

For Mac:
http://support.apple.com/kb/SP663
Software:
Mac OS X version 10.6.8 or later (intel-based hardware)
400MB of available disk space
iTunes in the Cloud and iTunes Match availability may vary by country.
Hardware:
Mac computer with an Intel Core processor and 512MB of RAM
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
Broadband Internet connection to use the iTunes Store
Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
But it won't work in a power-pc architecture Mac... see specifications:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Hopefully this helps.
Good luck & happy computing!

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

What is posted availability specification for Windows server 2012? 2012R2?

I am trying to put together a high availability solution and I want to know what the availability 'claim' of the individual components would be. What is the availability specification for Windows server 2012 and Windows Server 2012R2?(for example 99.9%
availability for the O/S itself). This would be in a non clustered or Load Balanced state. Just a single server running the O/S.

Hi,
SLA requirements determine how components such as storage, clustering, and backup and recovery factor into your organization.The term high availability is meaningless until you define how to measure it. IT shops measure high availability as the percentage of
time that systems are available, but the provider and consumer of high-availability services must agree on what constitutes availability and how the time is measured.
The related KB:
Service Level Agreement Review
http://technet.microsoft.com/en-us/library/cc546625.aspx
High-Availability System Architecture
http://technet.microsoft.com/en-us/library/cc750543.aspx
Service Level Agreement Review
http://technet.microsoft.com/en-us/library/cc546625.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What are the best practies for naming symbols (spaces OK,etc.)?

What are the best practices for symbol naming for ease, flexibility, & to avoid "gatchas" down the road?
Does it make any difference if one includes spaces in the names of symbols? Are there any widely followed conventions for naming them like using camelCase or underscores?
Thanks!

Hi Gina D 3333,
Best-practice file-naming conventions for PDF files are the same as for any other file. I found this article on Apple's website that contains some useful pointers to consider when you're naming files that will be used on multiple platforms: OS X: Cross-platform filename best practices and conventions
I hope this helps!
Best,
Sara

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Iphotos Package Contents: What are all these folders for? Is it too large to back up in the cloud?

Dear experts, I am quite a newbie when it comes to understanding the Mac filing system, as I originally came from the PC world. There's lots of things I dont understand in the iMac file viewer and how to organise and backup my photos is an important issue for me.
I know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Question 1 - What are all these folders for?
Please can someone explain what is the difference between all the folders I see? Some of them seem to be exact duplicates of the others e.g. Masters, Modified and Originals all seem to have the same content. So here is a list of folders that I see. What is in them?, or what is their purpose?
Data
Data.noindex
Modified
Originals
Apple TV Photo Cache
Attachments
Auto Import
Backup
Caches
Contents
Database
iLifeShared
iPod Photo Cache
Masters
Previews
ProjectCache
Thumbnails
Question 2 - Which photo folder should I back-up?
If I want to keep a physical backup of my photos, which of the above folders should I copy to an external hard drive? (I use Get Backup to automatically copy all important new or changed files to an external drive)
Question 3 - Using the cloud: What is the best way to backup my large photo library in the cloud safely?
I would like to have some kind of safe backup in the cloud for my photos. However the size of the iphoto library is huge at 165GB. Even the Masters folder is huge. It is 130GB. Is it possible to back up files of this size in the cloud? I have a couple of services called photo streaming and Dropbox, but they don't seem to be able to handle this kind of size. Photo streaming only works with 1000 photos (as far as I can tell), and my Dropbox probably has a limit too. I guess it's about 5GB. I am already using about 3GB of my Dropbox space for other files. I would consider both paid and free solutions.
Many thanks to all the experts for your help!

know that if I want to look at the original photo files on my iMac, I can right-click on users/myname/pictures and select "Show Package Contents".
Don't do that. That's like opening the hood of your car and trying to figure out what all the different bits and peices are and which you can yank out and dispose of. Simply, there are no user-serviceable parts in here.
So, your Question 2:
You back up the iPhoto Library as a single unit.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
Your question 3:
There is no good back up to the Cloud. There are a couple of reasons for this. One is that the datasets are so large and the cloud services shapre their download speeds. This means restoring can take days to complete. Then, and this is the big problem, the iPhoto Library needs to sit on a disk formatted Mac OS Extended (Journaled). Bluntly, no servers online are formatted appropriately, and if the Library is written to - by an incremental back up, for instance - there is a very high likelihood that the library will be corrupted.
Your Question 1:
The Library you're describing there sounds like one that has been updated a few times. Not everything you list there is a folder. Some will be aliases.
The Data folders hold thumbnails.
The Masters and Originals folders hold the files as imported from the camera
The Previews hold the versions of the edited photos that are accessed via the Sharing mechanism.
I think if you look losely that you'll notice that one of the Data folders and one of either the Masters or the Originals folders is actually an alias.
Everything else is a database or cache file of some form. All are required for iPhoto to work.
As an FYI:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

What are apple's specifications for acceptable performance

Similar Messages

Maybe you are looking for