What are Best Video Settings format to be used in Encore?

Hey,
So I have been raking my brain an issue or two I have with Encore. I am Exporting video files to be used in Encore CS5 and am coming up with mixed results. I created a 30 sec video and exported it as an .avi, .mov, .m2p all with mixed results. Once I render a DVD from Encore the Avi is the best results with crisper quality but I loose some quality and all the colors are muted but the blacks are fine. The M2P is blocky and jump on the footage and the MOV file is close to the M2p file output. I am using footage that is SD 29.97 4:3 format and the settings are correct when I export it. Also the Menu when it is finished and on a DVD is muted in color as well in comparison to the one I created and imported from Photoshop. Is there something I am missing that allows the quality to be its best on the menu screen in Encore? I am transcoding the settings out in Encore as Mpeg2-DVD and I am setting the rest to match my assets that I am importing. Please any help on these issues would be apprieciated.
Sincerely,
Confused

> created a 30 sec video
How? Capture/transfer from camcorder... web download... animation... the dreaded fraps? What CODEC is your source?
When I used to use NTSC DV AVI type 2 with 48khz as captured (digitized) via Pinnacle Dv500 from a Sony analog 8mm camcorder, the same specification AVI I output after editing in CS3 to give to Encore for authoring looked exactly like the source
Now I have a Canon Vixia HFS100 so copy AVCHD "MTS" files from SD memory to hard drive for editing in CS5, I simply use a DV NTSC Widescreen output setting to create AVI... and the DVD I create with Encore also looks very close to the original
You need to provide more details concerning your Premiere processing
Some reading/help...
This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Similar Messages

What are the video/movie formats that iBooks Author uses?

What are the video/movie formats that iBooks Author uses?

strange... when I click on it it goes to the correct page:
http://support.apple.com/kb/HT5065
http://support.apple.com/kb/HT5065

P35 Neo with E6750; what are best frequency settings?

Hi,
I have:
- P35 Neo motherboard
- E6750 Intel Proc. (2.66 GHz, 1333Mhz FSB)
- 2x 1GB DDR 800Mhz (configured as dual channel)
There is no OS installed at the moment because I ordered Vista, but the shop seems to have a problem getting it.
I noticed that when booting up, the mobo seems to misread the proc sometimes. The values in the Frequency/Voltage Control section of the BIOS are different each time.
I would like to know what the best manual settings are for these (I am not interested in overclocking, I just want to manually set the values so it always runs the same)
The values I would like to have are for:
- Adjust CPU FSB Frequency
- FSB/Memory Ratio
- Adjust PCI-E Frequency (I have a gecube HD2600Pro 512MB DDR2 installed)
- CAS# latency
- RAS# to CAS# delay
- RAS# precharge
- RAS# active to prec
are there any other settings I should manually set you think?
Thanks.

Quote from: LPent on 29-February-08, 20:52:08
- Adjust CPU FSB Frequency
- FSB/Memory Ratio
- Adjust PCI-E Frequency (I have a gecube HD2600Pro 512MB DDR2 installed)
333FSB
800MHz/1:1.2 ratio
Don't touch PCI-E frequency.
Quote from: LPent on 29-February-08, 20:52:08
- CAS# latency
- RAS# to CAS# delay
- RAS# precharge
- RAS# active to prec
5-5-5-18 is the JEDEC standard for PC2-6400.

What are best exports settings for project that will be shown on large screen?

I'm working in AE CS6 and am preparing a two-minute video using type animations and some still cartoons and some still photography. The client will eventually show it through his computer on a large screen to a group of people. What's the best settings in the render queue to output this so it shows pristinely? I'm thinking a Quicktime movie output as Animation but I really don't know. Can anyone help? Thanks.

Animation Quicktime is NOT the way to go. This codec will only playback in real time reliably on a super computer. You need to pick a good distribution format that will stick around. PICK H.264. Read on...
If by large screen you mean a really big TV then make a standard HD 1920 X 1080 comp at 29.97 fps and render using the Adobe Meida Encoder. You can put your Animation Codec Quicktime in the AME if you like but I think there are better DI formats (Digital Intermediate). Pick h.264 as the format and pick the Vimeo or YouTube HD preset and jack the data rate up to 40 or even 50 and enable Multi Pass rendering. You will have a file that will playback smoothly on any modern system, even from a newer iPad or other tablet.
If you mean a 4K display then use the same technique but create your 4K composition using the standard 4K display size of 3640 X 2160 and use the YouTube 4K preset.
You can jack up the data rate for that preset also but don't go above 50.
This will give you a file that is technically as good or better than you would get with a fiber connection to a 4K broadcast. How the project looks when played back will depend on how good you are at choosing the right techniques for your animation and color grading taking into account the color space you're working in, the gamut of the display, and the motion of animated elements as it relates to frame rate. (Hint: that's why I said to choose 29.97 as the frame rate because animating illustrations and text to look good on a big screen is a lot more difficult at 24 fps than it is at 29.97 and you don't need 60fps because what you gain in the elimination of judder you loose in the addition of compression artifacts when the data rate is the same.)
One last piece of advice. Obsessing about the quality of your playback format to achieve the MAXIMUM result is for the most part a huge waste of time and energy. Get the color right and tell the story well and avoid juddering animations and you'll blow the audience away even at 10 or 12 Mbps HD. 90% of all quality issues in rendered animations that I've seen are issues of design and animation technique, not issues of rendering with the wrong settings.

VLC-capture streaming ".ts" file to QuickTime - what are best VLC settings?

I captured a Webcast of a U.S. House Appropriations Committee hearing to disk with VLC (making a ".ts file") but am having trouble working with it. Although VLC will play it fine, QuickTime and MPEG Streamclip (where I hoped to convert it) will not. MPEG Streamclip plays it, but without audio. I've tried various kinds of Streamclip conversions to no avail (and I have Perian and QuickTimeMPEG2.component, which often solve problems). Two questions: Generally speaking, if you can't hear the audio playing it in MPEG Streamclip, is it likely that doing conversions with Streamclip aren't going to help you? And #2, for future reference, what would be the optimal settings in VLC to make a ts file that will be QuickTime-friendly (or at least MPEG Streamclip friendly where I can export or convert to something that QuickTime will accept).
P.S. -- Codecs shown in VLC under Properties are:
Stream 0: MPEG Audio Layer 1/2/3 (mpga)
Stream 1: MPEG-1/2 Video (mpgv)

Generally speaking, if you can't hear the audio playing it in MPEG Streamclip, is it likely that doing conversions with Streamclip aren't going to help you?
I would normally think not. However, as this is not a normal work flow for me, would you happen to have a short sample clip to play with for testing purposes?
#2, for future reference, what would be the optimal settings in VLC to make a ts file that will be QuickTime-friendly (or at least MPEG Streamclip friendly where I can export or convert to something that QuickTime will accept).
No TS, MTS, or M2TS content is compatible with QT since it only handles program stream files. As to MPEG Streamclip, again this is uncharted territory for me and I would need to run my own tests on a sample file before saying anything definitive.

TS2646 Settings to record in on Canon HD Vixia HG20 for easy migration into iMovee'11 v.9.0.9? It would be most helpful to list what the best possible settings are.

So, what are the best settings to record in using Canon HD Vixia HG20 for easy migration into iMovee'11 v.9.0.9?
It would be most helpful to list what the best possible settings are.
frame rate?
format? FXP?

I suggest filming in 30P with this camera. That should be the MXP setting.
You could also use 30i which would be the FXP setting.
You will get the best results in iMovie by shooting progressive.

What is THE best video file format to import into Premiere Pro CS6?

What is THE best video file format to import into Premiere Pro CS6? I am tired of the guess work of "this might work if you do this." Just tell me which is, flat out, the easiest for Premiere to read?? I generally animate in Adobe Flash, and some times with a Live camera. Premiere seems to pick and choose which video file it wants. I import from the File drop down box in the upper left hand corner, then move the video file to timeline. Under the "scrubber" there is a thin red, (or when rendered) a green line. The videos I put in the timeline show a thin yellow line which means Premiere is confused. So, in basic terms, which video format is MOST commonly accepted with the least amount of trouble/hassle?

Premiere has a function now where you can import a clip and drag onto a timeline and it will prompt you with a message about changing the timeline settings to match your clip, (or if there is no timeline it will automatically create one that matches your clip.) This is in CC of course so you might consider upgrading. They have fixed a lot of compatibility issues from CS6 to now. If you don't want to get all of CC for 60/month then you can at least shell out 20/month on premiere. It's worth it. They've made it where you don't have to worry about 99% of all video formats. They just work.

What are the quicktime settings to convert mpg4 files to streaming video?

What are the quicktime settings to convert mpg4 files to streaming video?

http://www.tansee.com/what-is-mp4-video.html
"hint tracks" are required. QuickTime Player Pro can add them.

What are best settings for host when PPTX is in continous loop

Thanks to help from Jorma is was able to set my PPTX in continous loop, and change the amount of seconds a slide was shown see how do i let a pptx presentation run on its own
There is only one issue left. What are the best settings. I find that to let it run, i need to press the sync button, but then the participants may choose (inadvertently) to stop the presentation from running in the loop.
What are the correct settings, so that a participant only sees the slides (no side bar etc) and the loop is running?
Your answer is very much appreciated

You shouldn't need to press the Sync button. In the Pod options menu for the share pod, with the PPT loaded, you will see an option for Show Presentation Playbar. Use that to get the Play button for the Hosts and Presenters in the room, and press play. The presentation will now play in a looped mode for everyone in a synchronized mode. You can also then hide the playbar to keep other Hosts and Presenters from stopping the playback and the Participants will never see the playbar or have the option to stop the presentation.
Additionally, if your focus is on the Share pod (has the focus highlight), you can use the 'P' key to begin playing the presentation without revealing the playbar to anyone. Adobe Connect 9 * Accessibility features

Apple TV: what are the specific settings I should adjust to?

Hi, there
I really need your help now. I use a DVD ripper to rip DVD to MP4 for Apple TV. I am trying to achieve quality that is close to a movie (m4v) from iTunes. What are the best settings to get this type of quality? I am not concerned with output file size, and I just want to get the very best quality I can. If so, what are the specific settings I should adjust to? The program I am using allows me to adjust video and audio parameters as below:
Video parameters:
Codec: h.264
Resolution: 1280*720
Bit rate: ??? (it is said Up to 5 Mbps, but what is the specific bit rate?)
Frame rate: 24 fps
Audio parameters:
Codec: aac
Sample rate: ???
Bit rate: ??? it is said 16 to 320 Kbps, but what’s the specific figure?
Audio channel: mono, stereo and 5.1 channel, which one should I choose?
Following are the tech specifications I copied from Apple’s official website:
Video formats supported
H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
Audio formats supported
AAC (16 to 320 Kbps); protected AAC (from iTunes Store); MP3 (16 to 320 Kbps); MP3 VBR; Apple Lossless; AIFF; WAV; Dolby Digital 5.1 surround sound pass-through
And I have selected some parameters according to this, please see the above contents, but there is no info about specific video/audio bit rate, audio sample rate, and audio channel. I just wanna know if I want to watch the movie on my 1920×1080 TV, what are the specific settings I should adjust to?
Any suggestion is appreciated. Thanks in advance.

Well, then how about playback Apple TV uncompatible video files? I have some other video files(such as avi, mkv,not DVD), and I also have a video converter, i know i can convert them to m4v, mp4, or mov that supported by ATV,but the thing is that i still don't know the best specific settings for conversion. Any suggestion? Many thanks for your kind reply.

Best video settings

Hi all,
What are the optimal settings for videos for the iPad, if I use say Handbrake to put some of my dvd's on it?
I don't want huge size files. I imagine the movies your download from iTunes are optimal but that service is not available for me unfortunately.
Any help is much appreciated. Thanks!
Mc

What are the optimal settings for videos for the iPad ... I don't want huge size files.
"Optimal" is in the eye of the beholder. TV setting (without AC3 passthrough) would probably be the best combination for moderate quality and smaller file size. iPod setting would provide smaller files but also reduce quality slightly. A custom 16:9 anamorphic setting (say 864x576 at 3.8 to 4.2 Mbps) targeted to play at 1024x576 would be an equivalent setting for HD sourced content.

What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC. My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service. This came with a new modem/router combo made by Cisco and is model DPC3825. Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service. Should I be setting the Cisco modem/router to Bridge mode or the TC? Should I have Shaw disable anything? Any insight is greatly appreciated.

Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

Best Video Settings For The iPad.

Hi everyone,
Does anyone know this ? "Best Video Settings For The iPad".
Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video. it's rather frustrating to have many technical jargons online without anyone giving real pointers at real values in conversion settings.
Thanks in anticipation.

Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video.
It is impossible to answer your question without knowing both the aspect ratio of the source file and your personal preferences for displaying it on a 4:3 iPad screen.
Basically, you have two options here when converting files of one aspect ratio for display on a screen of another aspect. You can distort the original display to "fill" the ipad screen. (E.g., you can make a widescreen movie exactly fill your iPad screen but then people and objects will look tall and skinny.) The other option is to convert at the original aspect ratio and simply use the iPad "zoom" option to force your widescreen movie to fill your 4:3 screen by scaling the height of your movie to fill the screen and allowing the left and right edges of you movie to be cropped from your view. You have no other choices here other than living with the defaulted black areas.

What are Novells recommended settings for policies

Hello,
Who can tell me please what are Novells recommended settings for policies? Should we make a few big Policy where everything is handled (for example a policy for standalone workstations, one for desktop PCs, one for notebooks etc..) or single policies (for example "Desktop Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window minimizing mouse gesture" and so on) and put them in a PolicyGroup. What is the best way?

The fewer the policies the better.
Generally Folks do something such as a WS assigned policy as a baseline
and then a user one to over-ride.
Trying to create one policy per setting would likely cause windows great
confusion as well as being very slow.
On 3/14/2011 7:36 AM, Schneekette wrote:
>
> Hello,
>
> Who can tell me please what are Novells recommended settings for
> policies? Should we make a few big Policy where everything is handled
> (for example a policy for standalone workstations, one for desktop PCs,
> one for notebooks etc..) or single policies (for example "Desktop
> Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window
> minimizing mouse gesture" and so on) and put them in a PolicyGroup. What
> is the best way?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
Tools > Protection > Encrypt < Encrypt with Password
Answer YES to change the security.
A new window opens:
     Do NOT select Document Open (or that will require a password to open the document.)
     Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
     Change the following 2 settings from the drop-down box:
          Printing Allowed: Select High Resolution
          Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
          Leave selected: "Enable text access for screen reader devices for the visually impaired"
          Change Permissions Password (insert a strong password)
          Leave all other settings alone in "Options"
          OK - OK
          Re-enter the Permissions Password (the one you entered above)
          OK - OK
          Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

What are Best Video Settings format to be used in Encore?

Similar Messages

Maybe you are looking for