What are common dimensions for Captivate output?
Hi, I'm new to Captivate, actually using the trial to see if it will work for me.
I'm wondering what dimensions I should use for my project. My audience is medical professionals who should have modern computers and screens for the most part.
Also, is there a way to resize the project once I get started?
Thanks much!
-jg
PS: I've used the trial of Premiere Elements in the past (and then bought it), and there was a watermark. What restrictions does the trial of Captivate come with?
Hello,
The trial version of Captivate is fully functional, perhaps you will not be able to install updates/patches but there is certainly no watermark.
The question about dimensions, resolution is less easy to answer because you have to take into account a lot of elements: will the published file be deployed in a LMS, you will have to know that some real estate will be occupied in horizontal and vertical direction by the LMS itself. Same with playing in a browser window. If you want to add a playbar, it will be outside of your movie and needs at least 16pixels in the height. If you add a TOC this will add at least 250 pixels to the width.... It is good to know those factors before deciding which resolution to use.
Yes, you can rescale after creating the project but that will always lead to some quality loss. It is of course better to downscale than to upscale because in Captivate it is all about bitmaps. If you have to rescale, I tend to recommend to keep the same width/height ratio or to allow cropping.
Lilybiri
Similar Messages
-
What are the dimensions for a Muse Phone background?
What are the optimum dimensions for a background in Muse when doing a phone layout?
this is a list of all mobile and smartphones incl. screensize/resolution http://cartoonized.net/cellphone-screen-resolution.php
-
What are the settings for video output to consumer blu-ray DVD players?
I have a Maya animation rendered at 1920 x 1080. There is no audio yet, butI will create SFX for the audio track. The animation was rendered for 24 fps viewing, but in truth I don't think I would notice if the playback was 23.97 fps. I have Premeire Elements 7 and there are no pre-sets for HD or Blu-Ray. It's not clear to me that I can do this in Elements 11 either or if I need to buy Premeire Pro to do what I want.
Thanks,
MattThanks Ann.
I know I'll need to upgrade. Since my editing needs are infrequent I just wanted to find out if I had to spring for Pro or if Elements11 would do. Also, I'm trying to figure out what the settings should be. I read about 24fps progressive (for film?) and 23.97 fps progress (for video?). It is a short animation that I want to loop for a Point of Purchase video display.
Thanks again for taking the time to answer.
Matt -
What are the ranges for correct skin tones using RGB%?
What are the ranges for correct skin tones using RGB%? Used to using a scale from 0 to 255. But with LR it's RGB , I know 100% RGB is white. What do you use for %?
While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
R: highest %
G: middle %
B: lowest %
To get a little more specific. In general,
R: Y + (15-20)
G: average of R and B
B: R – (15-20)
For example, the following values represent common Caucasian skin tones using the rules above:
* R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
* R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone. Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors. -
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
In Address Book, Lion, what are the checkmarks for when you Edit a Contact?
In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?
I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using. -
I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it? -
What are the steps for loading master data
Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
EvionHi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S -
What are the dimensions of the macbook pro 13 inch shipping box
What are the dimensions of the brown shipping box that the 13-INCH MBP is shipped in including the weight. Please give the dimensions in the order Length, Height, and Width .
I have one in front of me, albeit 2009. 14 x10.5 x 3". This was the shipping box it came in; there wasn't an enclosing box.
-
What are the dimensions of the Apple wired keyboard?
What are the dimensions of the Apple wired keyboard?
K1
I am constantly amazed at our beloved Apple!
Not only lack of info, but SysReqs seem a bit restrictive? How can a plain ol' USB keyboard require OSX10.6 or better, yet NOT support USB3.0 AND require some Apple software driver update? [sound of exasperation -> sigh]
best as always
CCC -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
What are the settings for rework order quality inspection
HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction -
WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT
I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.
-
What are the settings for automatic service PO?
What are the settings for automatic service PO?
Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you!
Maybe you are looking for
-
Gray progress bar on boot twice now
I've experienced a gray bar on boot twice now. I upgraded to a 2011 MBP and transferred my 500 GB Toshiba SSD from last year's MBP into the new model, into the SuperDrive slot using a MCE OptiBay (I put the existing SSD into the OptiBay since the Sup
-
What is the "Audio line in" port for?
I have a microphone headset but plugging the mic cord into the audio line in port does nothing. Similarly, when I tried plugging a cable from the "tape out" of my audio amplifier into that port for dubbing purposes, nothing happened. In both cases I
-
Select-options/range in screen
Hi all, I just wanted to display select-options in the screen numbered 1000, by putting which control can i do this ??........ regards Jose
-
Hi everyone, Following an upgrade to SQL Server 2012 which didn't succeed, someone recommended that I repair my actual SQL Server 2008 R2 SP2 setup. The actual setup I have, which btw is running without any problem, is the following: SQL Server 20
-
Can ESB satisfy these publish / subscribe requirements?
I have some requirements that I thing ESB should be able to help me to achieve. I effectively have a central system that needs to update some other systems, depending on the data it could be 1 system or 5 systems to be updated. The requirements I thi