What are "Connection Lines"?

The menu option, Insert>Connection Line always seems to be grayed-out. I haven't found any reference to this feature in the help file.What I'm seeking is a way to draw a line between some text in a text box and a cell in a table on the same page?
Does anyone know what "Connection Line" is and under what conditions it is enabled? More importantly, is there a way to draw a line as described above?
Thank you for the help.

Connection lines are between text boxes and are only available in master layouts.
Read: Publishing with iBooks Author, by O'Reilly press for a detailed info. It's free.
http://shop.oreilly.com/product/0636920025597.do?sortby=publicationDate
- Fabe

Similar Messages

  • What are my line stats like. Good or bad?

    Hi there,
    I've just recently changed ISP to BT, within the last couple of days.
    I know I'm still probably in my line training state.
    Using the supplied BT Home Hub 3.
    My stats so far are:
    ADSL Line Status
    Line state:    Connected
    Connection time:    2 days, 01:46:58
    Downstream:    2.531 Mbps
    Upstream:    448 Kbps
    ADSL Settings:
    VPI/VCI:    0/38
    Type:    PPPoA
    Modulation:    G.992.1 Annex A
    Latency type:    Interleaved
    Noise margin (Down/Up):    6.6 dB / 24.0 dB
    Line attenuation (Down/Up):    45.4 dB / 29.0 dB
    Output power (Down/Up):    18.1 dBm / 12.3 dBm
    FEC Events (Down/Up):    369092 / 122
    CRC Events (Down/Up):    1961 / 90
    BT Speedtester results:
    Download speed achieved: 1793 kbit/s
    DSL connection rate: 2592 kbit/s Down and 448 kbit/s Up
    Upload speed achieved: 308 kbit/s
    I'm hoping to get my Downstream speed around 3 megabit/s or better.
    But so far I'm still lucky if I'm above 2.5 megbit/s.
    As you can see my line has been stable for the first 2 days of connection, not sure if it should have dropped a few times as my line is being trained/tested?
    With the stats I have posted, should I be waiting for a faster connection?
    Or is this all my line can handle?

    I've just got home after a day out and I just noticed my speed (bandwidth) has dropped a little.
    So I logged in to my HH3 and I noticed that it had a different connection time.
    I was at something like 6+ days, but now back down to 0 days and a few hours.
    Q:  Will this have affected my 10 day line training?  So am I back to waiting for another 10 days, before my line speed (hopefully) increases?
    My routers log (when the connection dropped and then back up):
    09:45:11, 27 Jul.    (679519.170000) DSL is up
    09:45:09, 27 Jul.    (679516.850000) DSL noise margin: 24.00 dB upstream, 6.60 dB downstream
    09:45:09, 27 Jul.    (679516.790000) DSL line rate: 448 Kbps upstream, 2496 Kbps downstream
    09:44:41, 27 Jul.    (679488.900000) Server URL: https://pbthdm.bt.motive.com; Connecting as user: ACS username
    09:44:34, 27 Jul.    (679482.610000) DSL is down after 11119 minutes uptime
    09:44:33, 27 Jul.    (679481.290000) PPPoA is down after 11119 minutes uptime
    Nothing of interest found before this, well no reason why it dropped out.
    Thanks in advance.

  • What Are These Lines?

    hi.
    i get these thin horizontal lines after exporting my dvcpro hd 1080p25 footage with its current settings. they are mostly noticeable in the fade-in/fade-out areas.
    why? how to get rid of them?
    (see the pic below)

    Just download the Preference Manager from www.digitalrebellion.com and have it do it for you. No point digging about when a FREE app does this for you with the click of ONE button.
    CLICK!
    Gone
    Shane

  • Hotplug, hwdetect ? what are those lines at bootup :s ?

    Hi all,
    I'm just new to the Arch world after running Debian and Gentoo for 3 years and I think I found the distro I was looking for. Anyway, I'd like to speed up a little this boot as I did for gentoo with initng for example. I read some interesting informations on hwdetect which can replace hotplug so I did it Anyway it works (seems to by the way ) but as Arch boots, I still get these lines about my hardware you know, just before Arch Linux "logo" appears and then all the scripts indicating done when they did their task. I thought these lines were providing by hotplug but since I "replace" it with hwdetect, I don't understand from where they come Which script/program ?

    Zanton wrote:I think you're right. I didn't think it was taking so much time to boot up kernel
    It also takes a few seconds on my Pentium M 1.7GHz. You could try the initrd kernel in testing with a custom initrd26.img. It's smaller than the one in [current] repo so it should boot faster. To do so, enable the testing repo in /etc/pacman.conf. Also it would be better to move it at the end of the other repo if you don't want to use the other packages in testing. Then:
    # pacman -Sy testing/kernel26
    # pacman -Sy testing/mkinitrd
    Don't forget to read the instructions in the wiki.

  • What are the line code methods used in ISDN ?

    a link would be appreciated.
    thanks!

    Ok got it. Check here under each switch type for the line coding:
    http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080093d6d.shtml#top2

  • What are these lines around a table?

    Probably a basic question, but I've run across something in
    Dreamweaver that is a little maddening...
    When I create tables with 0 cellpadding or cell spacing, I'm
    still getting hairline "borders" around my table cells - if anyone
    can see the problem (I'm sure it's simple), please enlighten me.
    Here's the page example:
    http://www.NicheAffiliateMarketingSystem.com/12days/index.html
    Just upgraded to DW9 from MX.
    Thanks,
    dp

    Add cellspacing="0"
    Walt
    "maximize" <[email protected]> wrote in
    message
    news:ghnlcu$jcu$[email protected]..
    > Probably a basic question, but I've run across something
    in Dreamweaver
    > that is
    > a little maddening...
    >
    > When I create tables with 0 cellpadding or cell spacing,
    I'm still getting
    > hairline "borders" around my table cells - if anyone can
    see the problem
    > (I'm
    > sure it's simple), please enlighten me.
    >
    > Here's the page example:
    >
    >
    http://www.NicheAffiliateMarketingSystem.com/12days/index.html
    >
    > Just upgraded to DW9 from MX.
    >
    > Thanks,
    >
    > dp
    >

  • How do I delete Gray connection lines

    I was working in Pages on a tri-fold brocure.  Out of nowhere seemingly these, at first blue connection lines showed up.  I could not figure out what they were or how to remove them, but I was still able to clip and paste and keep working.  Then the connection lines became Gray and now certian parts of my document ca't be edited.  What do I do to get rid of these and be able to keep working with my document?

    You didn't say what the connection lines were between or which template.
    Probably they are between linked textboxes and cause the text to flow from one textbox to another.
    To unlink them you click on one end or other of the line on the blue box and drag it off the box.
    Peter

  • What are the netsh cmd line for windows server 2008,2012 ?

    Hi
        I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
    Before Netsh cmd support for all os including Win 8,win 8.1.
    I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
    netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
    when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
    This is my code in asp.net using vb
     Dim pip As New Process()
            Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
            pip.StartInfo = pipa
            pip.StartInfo.UseShellExecute = False
            pip.StartInfo.RedirectStandardOutput = True
            pip.Start()
            pip.WaitForExit()
    And if change  ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
    I can change ip,subnet,gateway,both dns is some other way,below is the link
    http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
    but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
    So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
    Pls reply asap
     Regards
         Aravind 

    For the shell scripting I'd try them here.
    Scripting forum on MSDN
    Scripting Guys forum on TechNet
    For the asp.net I'd ask over here.
    Microsoft ASP.Net forums
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • What are the dashed  line in air port express and air port extrem

    what are the dashed line in  air port express and air port Extrem

    The dashed line represents a wireless connection between the base stations.

  • My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    My iPhone will
    not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    Try resetting your network settings.
    Settings>Genenal>Reset>Reset Network Settings.

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • Can I determine what clients are connected to my weblogic server?

    Hi, is there anyway of determining what clients are connected to my Weblogic 8.1 server - I want this information to be generated for me, not by maintaining a list when clients login initially to the server.
    Also is there any thing that gets fired when a client terminates prematurely - for example being killed by the task manager. I need to know this, so the server knows what users are currently logged in, to prevent a user logging in twice (via the same username login).
    Cheers,
    Ants.

    Hi,
    Cousld u send me a simple example to check my Weblogic server for EJB with client.
    Iam struggling from last todays.
    and also tell what software i should use for deployment of EJB of weblogic 8.1.
    ur help highly appriciate by me
    My mail ID: [email protected]
    thanks,
    AHOY

  • How can I tell what devices are connected to my e2000

    I have a cisco e2000.  I just turned off guest access, but 'cisco connect' says I still have 4 devices conneted to my router.  Is there a way I can tell what those devices are?
    Also, even thoug the setup said my guest access had a password, I found out it did not.  Any concerns about nosy neighbors?

    Try to install Network Magic. It will show you what are the devices connected to your router. You can download it from here.

  • How do I see what devices are connected to my iTunes

    How do I tell what devices are connected to my iTunes

    You can't see what devices and/or computers that your account is logged into, all you can do is see which (if any) are associated to your account : iTunes Store: Associating a device or computer to your Apple ID.

  • I have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

    i have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

    Open the airport utility.
    Click on manual setup.
    Click on advanced.
    Click on Logs and Statistics.
    Click on Wireless Clients
    Voila!!

Maybe you are looking for

  • Need to create a report to show values for a particular date range

    I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt. These generic date columns are not present

  • Account disabled

    I had an un-authorized purchas on my account a couple of moths ago. I disputed it and we're good. Now when I try to make another authorized purchase the iTunes store tells me my account is disabled even though I reset my password. please help

  • Field Mapping from External System To BW

    I am trying to map some keyfigures from another BW system to my companies BW system.  The objective is to find KeyFigures in our system that closely match or are similar to the KeyFigures from this external BW system.  Basically what I am doing is op

  • N79 - IMAP retrieves headers only ???

    Hello everyone, i'm having a strange problem .When i try to retrieve full email message content through my IMAP server in the organization where i work, i do not get anything but the same listing of emails from IMAP. Even in the Settings menu of the

  • CSS Designer suddenly inactive for .less

    Hi, a short while ago (~15min.) I was editing a .less file with the CSS Designer. Now, suddenly, the CSS Designer is not accessible/usable anymore with .less. Still works with regular css files. With the .less, the CSS Designer sections still show, a