What are Data sources for 0PUR_c10

Hi ,
Now iam activating BCT for 0PUR_c10 cube in BI 7.0
before activating in BI side can i know
1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
2. plz tell me , what are master data info objects in BW side for MM data ?
i will assign points .....
Thank u
PSR

1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
PO delivery schedule lines are first consolidated in an ODS through data from the InfoSources Purchasing Data (Document Schedule Line Level) as of 2.0B (2LIS_02_SCL) and Offsetting Confirmation and Goods Receipt (2LIS_02_SGR).
http://help.sap.com/saphelp_nw70/helpdata/en/bb/e99a3d35cf6f53e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/41/2b52e35f153014e10000000a114e5d/content.htm
Do look for the dataflow/network diagram for 0PUR_C10 in Metadata Repository - you can find the BContent Flow.
2. plz tell me , what are master data info objects in BW side for MM data ?
Right click on ODS's & Cubes in MM - Infosource Overview - This will give the list of loadable data targets for associated Datatargets.
Go to RSA5 search for the datasources.

Similar Messages

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

What are all the Standard Data targets&Data source for Warehouse management

Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What are the procedures for getting Apple to remotely wipe all my data off my ipad that was stolen? I have no hope of recovering it. Please advise asap...thanks!

What are the procedures for getting Apple to wipe the data off my original ipad I bought two years ago. I had it stolen from a hotel room over the weekend and it is not password protected and no I did not download app to find it.
Any hwlp would be greting appreciated!

Apple can't do it, only you could potentially do it if you had enabled Find My iPad on it before it was stolen.
If it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

What are the prerequisite for getting MTTR / MTBR data.

Dear SAP Experts,
I want to know what are the prerequisite for getting MTTR / MTBR data.
Regards
ERP Tech

Pre-requisites are:
Maintain Start date in Equipment / Functional location master
Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
Maintain the Breakdown tick mark in notification
Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types)

What are my options for a data plan + upgrade?

So my old phone (Samsung Intensity) broke today, and I'm looking to upgrade to a smartphone. I would prefer an iPhone, but really it's not that big of a deal if I get a Droid. I'm eligible for an upgrade currently. What are my options for a smartphone and a data plan? I'm looking for what's the cheapest option as far as this goes. People tell me an iPhone is free with an upgrade, and that the cost is $20 a month, but I just want to be sure.

Unless you have an old calling plan, you should be able to add a tiered data plan for your new smartphone (i.e., $30 for 2 GB). If you switched to the Share Everything plan, your monthly cost would be $40 line access + at least $50 for 1 GB data (includes unlimited minutes/texts and mobile hotspot, although the hotspot data usage comes out of your data plan), plus, of course, taxes/fees (and insurance, if applicable).
You can check pricing for phones via your on-line MyVerizon account if you click on the Upgrade button. If you are mainly interested in free phones (keep in mind that there's a $30 upgrade fee), there's the Nokia Lumia 822, Spectrum 2, Droid Razr M, iPhone 4, Galaxy Stellar, Marauder, Rhyme, and the Lucid. Several of those are 3G phones.

Are Multiple (Concurrent) ABAP Data Sources for AS Java UME Possible?

Hi All,
We have a solution which is using a JAAS logon module for partner authentication. for reason's I won't go into we have decided that it is best to use an ABAP data source. We will also be using the same JAAS approach for other ABAP applications in the future. Ideally we would configure the same JAAS server to use ABAP UME data sources from ABAP server 1 and ABAP server 2.
I see there are provisions in the documentation for multiple UME data sources of different types but it doesn't clearly say about different concurrent data sources. IS this even possible? If so is it wise?
Thanks,
Doug

Julius,
Thanks again for your reply. This is confusing. We have an existing .Net logon application where we centrally administer accounts and where users log in. On successful login they are issued a .net Auth cookie. Our JAAS module takes that cookie, does a web service call back to .Net and authenticates them. So authentication is done on the basis of the .Net cookie, not the java UME. We simply need a java ume to allow users to execute the application that invokes the JAAS module. The application invokes the JAAS module and if they successfully authenticate they are forwarded to the requesting SAP application. So the JAAS ume is really just needed to allow various users to run the JAAS invoking application starter. Ideally we'd use the same starter application for users of SAP Application 1,2,3, etc.
So that's where the question came from on multiple ABAP UME data sources for a single Java instance.
Hope that makes sense. Regardless the answer I guess is not possible but you see the method to our madness. And yes it is madness.
Thanks,
Doug

What is the data source for cProjects hierarchy texts 0CPR_GUID?

The cProjects hierarchy will not display texts, only the technical name. I believe I must extract the texts for BW InfoObject 0CPR_GUID. I can not identify the text counterpart to 0DPR_HIERARCHY_ATTR data source for BW InfoObject 0CPR_GUID.
Questions:
1) What is the technical name for the text data source of BW InfoObject 0CPR_GUID?
2) Is this data source included in NetWeaver 04?
Thanks you for your help,
John Hawk
[email protected]
(209) 324-0436

The Answer:
The project element data sources must be mapped to both the project element infosoure AND 0CPR_GUI_TEXT.
For each data source
0DPR_APPROVAL_TEXT to 0CPR_APPROVAL_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_ITEM_TEXT to 0CPR_CHECKLIST_ITEM_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_TEXT to     0CPR_CHECKLIST_TEXT and0CPR_GUID_TEXT
0DPR_PART_TEXT to 0CPR_PART_TEXT and 0CPR_GUID_TEXT
0DPR_PHASE_TEXT to 0CPR_PHASE_TEXT and     0CPR_GUID_TEXT
0DPR_PROJECT_TEXT to 0CPR_PROJECT_TEXT     and 0CPR_GUID_TEXT
0DPR_TASK_TEXT to 0CPR_TASK_TEXT and 0CPR_GUID_TEXT

Creating data source for planning area

Hi Experts,
Can you please help me by providing steps to create data source for planning area.
Thanks in advance for your help.
Regards,
Brahma

Hi Brahma,
Please follow below link....
http://help.sap.com/saphelp_scm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Hope this may help
Regards,
Harshil Desai

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

What are Data sources for 0PUR_c10

Similar Messages

Maybe you are looking for