What are differences between a N95 for European ma...

Hello. I would like to ask you, what are the differences between a N95 for European market and one for Asian? I bought one for Asian and I have an awkward keypad and a dictionary. I`m wondering are there any other differences, like built quality? Should I change mine for an European one? Is it possible to change a keypad for a normal one? Anything other that hasn`t been mentioned? Thank you all, in advance.

22-Apr-200704:19 PM
smalldog wrote:
the main difference is between asian version and euro version are:
there is a dictionary program but you will have to install a dictionary database to use it.
when press and hold the # key, the phone will not switch to silent mode. instead it switches to "line 2".
camera sound cannot be turned off due to policies in asia
as far as i am concern
Hmmm not sure you can alter the dictionaries that come pre installed, the dictionary is there for when you use predictive sms, so it can match the words and u have the option to add words it does not recognise
holding # key on my generic N95 does not does not either of what u described, i think u should research your info, b4 u commit to a post, maybe the odd network that install there own firmware has the option to use the # key to change between line one and 2 and otheres programe it to scroll between silent and general, my handset being generic it does neither of these, so im guessing Nokia did not design this, why would u need the # key to change profiles when u can do this by pressing the power button once
Phones I've owned (not in any order) 8210 7100 3510 3510i 7650 9210Communicator 1600 3310 3330 3650 5110 6230 9500Communicator N70 N90 N91 N73(ME) N95

Similar Messages

  • What are differences between nokia N95 8gb new upd...

    what are differences between nokia N95 8gb new update V20 and previous update V15 and what are the bugs in new update V20??

    Does your search not work?
    /discussions/board/message?board.id=swupdate&threa​d.id=31380

  • What are differences between the target tablespace and the source tablespac

    The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
    Why create so many errors?
    How to avoid these errors?
    What are differences between the target tablespace and the source tablespace?
    Is this datapump action really successfull?
    Thw following is the log output:
    [oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Processing object type TABLE_EXPORT/TABLE/TABLE
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
    . . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
    . . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
    . . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
    . . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
    . . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
    . . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
    . . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
    . . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
    . . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
    Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
    Processing object type TABLE_EXPORT/TABLE/COMMENT
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39083: Object type REF_CONSTRAINT failed to create with error:
    ORA-00942: table or view does not exist
    Failing sql is:
    ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
    ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/TRIGGER
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
    ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

    Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
    Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
    Justin

  • What are differences between IDES Solution?

    Hello Guru,
    Could you tell me what are differences between IDES Solution as detail below?
    I try to find a documentation but I can not found them in info page.
    I would like to install IDES ECC6. Which is IDES Solution I should to download.
    You can go to the path: Installations and Upgrades -> SAP Application Components -> IDES SOLUTIONS
    IDES SOLUTIONS
    IDES EA-DFPS 6.03
    IDES IS-CWM 6.03
    IDES IS-PS-CA 600
    IDES OIL-600
    IDES RETAIL-600
    IDES SEM-BW 6.0/7.00
    Thank you very much.
    Regards,
    Thanarat T.

    Hi,
    Firstly, IS is meant for Industry Solutions which means the SAP Components are specifically developed for respective Industries, for example: IS-OIL, IS-MINING, IS-RETAIL, IS-SEM, is for Oil basin companies [Industries], Mining companies, Retail Industries, and SEM for Strategic Enterprise Management respectively.
    So, the SAP Components which are required for CLIENT IMPLEMENTATION those can be dowloaded or purchased from SAP Service Market Place. 
    I hope you understand the scenario.
    Regards,
    prabhu kishore reddy.

  • What are differences between Java and C#

    What are differences between Java and C#?
    I was looking at C# and it looks very similar to java, does anyone have any input on what the primary differences are?

    C# has ventricles, being a more modern, hip,and
    stylin language.Yeah, but it can't use them properly unless youbolt
    on an after-market turbo charger and paint some
    go-faster stripes.
    Java doesn't need ventricles, as the language is
    built as a bifurcative scrobbidibbit from theground
    up.
    And here I thought you were smart.The ventricles add power on the backswing and keep
    down the humpty-B count, and those stripes don't
    really do much except to impress the PHBs. A
    ventricle here and there wouldn't do Java anyharm.
    Oh, I see.
    I didn't realize you were concerned with humpty-B. So
    I suppose you put 17 firewalls in front of your VM's
    Jeffries tubes too huh? And measure productivity in
    fleems per wonkle?
    That may have worked back when you carved FORTRAN on
    stone tablets, and then went to look for a nice young
    lady to club and take home. But modern software
    development techniques demand a focus on the
    regressive thromboid paradigm, and ventricles only
    get in the way when you're trying to calibrate that
    against the latest fractal suppository data.At least I have actual experience in carving FORTRAN on stone tablets, so I know what I'm talking about. (The clubbing was the other way around but that's neither here nor there.) As for your regressive thromboid paradigm, regressive is exactly what it is. Progressive paradigms, whether thromboid or rhomboid, require ventriculation to achieve their maximum potential.
    And I suppose if you're still using those Jeffries tubes in your VM, it's not surprising that it's humptied to the max. Try installing Apache Fallopian if you really want to dehumptify it, or Apache Eustachian for 64-bit VMs.

  • What are differences between clustering and partitioning?

    Thank you for reading my post
    Can some one let me know what is different between clustering and partitioning?
    What i think is as follow:
    In clustering we have one storage (one hard disk for example) and several instances which use that storage to server the applications
    in partitioning, we have multiple instances and each of them has its own storage (hard disk) but all of these instances and hard disks serve one application.

    The word "cluster" has different meanings in Oracle.
    Another kind of cluster is a database object where
    master and detail rows are stored together in the
    same block. Table joins are very efficient, but
    reading data from one table and not another tends to
    take longer. These kinds of clusters are vary rarely
    used.Do not forget single table sorted hash cluster!

  • What are differences between Adobe Premier Pro & Elements

    Looking to purchase Adobe Premier. What are the differences between Premier Pro and Elements?

    Welcome to the forum.
    This article is a bit older now, with changes to both PrPro CS 6 and PrE 11, but most aspects still hold. PrPro CS 6 has added even more "differences" though: http://forums.techsoup.org/cs/community/b/tsblog/archive/2011/10/18/premiere-elements-9-vs -premiere-pro-cs5.aspx
    Good luck,
    Hunt

  • What Are Differences Between Adobe PSE 10  9 and 8

    As I am new to this which would be the easiest for me to start with

      It’s best to purchase PSE10 which comes with full support with Adobe. Whilst you can obtain PSE8 or 9 at a discount price, earlier versions are no longer supported.
    If you want to try out the program for yourself before purchasing , download the 30 day free trial using the link below. If you like it you can then get the boxed product from your favorite store or on-line retailer. Simply enter the product serial number from the DVD box into the trial and it becomes yours to keep. No further installation is required from disk.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en_us
     

  • What is difference between sy-index and sy-tabix and where both are using ?

    what is difference between sy-index and sy-tabix and where both are using ?

    hi nagaraju
    sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
    sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
    SY-INDEX is a counter for following loops: do...enddo, while..endwhile
    SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
    Here is an example from which you can understand the difference between sy-tabix and sy-index.
    Itab is an internal table with the following data in it.
    id Name
    198 XYZ
    475 ABC
    545 PQR.
    loop at itab where id > 300.
    write :/ itab-id, itab-name , sy-tabix, sy-index.
    endloop.
    My output will be :
    475 ABC 2 1
    545 PQR 3 2
    Sy-tabix is the index of the record in internal table.
    sy-index gives the no of times of loop passes.
    So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
    Regards,
    navjot
    award points

  • What is difference between bus.Area and plant

    dear experts, 
                what is difference between bus.Area and plant?
    thanks
    Rajakarthik.

    Hi
    Plant and Business Area are not the same.
    Business Areas are configured in FI module as per the Product lines or geographical operations basis.
    Where as The plants created in the logistics (General) module are assigned to the company code. That means all transactions taking place in the plants are posted to the attached company code in SAP FI.
    You can post a business area to several company codes and use it for cross-company-code reporting.
    The R/3 System uses a combination of plant and division to assign the relevant business area. When you use the R/3 System to automatically draw up accounts for business areas, you can assign only one business area to a combination of plant and division. Plants and divisions can be assigned and combined in several different ways.
    http://help.sap.com/saphelp_46c/helpdata/en/5d/a77d80ec1111d2bc1000105a5e5b3c/content.htm
    Re: Business Area and Plant
    Regards

  • Whats the difference between these two queries ? - for tuning purpose

    Whats the difference between these two queries ?
    I have huge amount of data for each table. its takeing such a long time (>5-6hrs).
    here whice one is fast / do we have any other option there apart from listed here....
    QUERY 1: 
      SELECT  --<< USING INDEX >>
          field1, field2, field3, sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end)
        FROM
          tab1 inner join tab2 on condition1 inner join tab3 on condition2 inner join tab4 on conditon3
        WHERE
         condition4..10 and
        GROUP BY
          field1, field2,field3
        HAVING
          sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end) <> 0;
    QUERY 2:
       SELECT  --<< USING INDEX >>
          field1, field2, field3, sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0))
        FROM
          tab1, tab2, tab3, tab4
        WHERE
         condition1 and
         condition2 and
         condition3 and
         condition4..10
        GROUP BY
          field1, field2,field3
        HAVING
          sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0)) <> 0;
    [pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
    Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
    Andre

  • Hi I have the old photo shop elements 10 on my computer and want to update and was wondering what the differences between photoshop, lightroom and photoshop elements are? Also when I upgrade does it have to be with a monthly membership or can I just purch

    Hi I have the old photo shop elements 10 on my computer and want to update and was wondering what the differences between photoshop, lightroom and photoshop elements are?
    Also when I upgrade does it have to be with a monthly membership or can I just purchase the product out right like you use to be able?

    You cannot "update" from what you have to any of the applications you mention. It will have to be a straight purchase or subscription at full price.
    Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
    Lightroom is all about volume, and very light editing.
    The Photoshop Elements forum is at:
    https://forums.adobe.com/community/photoshop_elements/content
    Remember, you are not addressing Adobe here in the user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
    I do not know where there is such a comparison table as you seek, but someone else might, or you can google.

  • What are application events and system events? what is difference between ?

    what are application events and system events? what is difference between ?

    The Control Framework triggers the event irrespective of the screen flow logic, that is, without processing the PAI and PBO events. These events are called system events. This type of event processing is the default setting.
    ·The Control Framework processes the PAI module after an event. In this case, you must call method CL_GUI_CFW=>DISPATCHto initiate the event handling of ABAP Objects. These events are called application events.
    Application Event : you must first register the events for the control instance and consequently on the frontend.
    like..
    DATA events TYPE cntl_simple_events.
    DATA wa_events TYPE cntl_simple_event.
    1. Using field
    appl_event , define the event as an application event:
    wa_events-appl_event = 'X'.
    System events are passed on irrespective of the flow logic of the relevant screen.
    1. Change the value of field
    wa_events-appl_event in the PBO module:
    wa_events-appl_event = SPACE.
    Edited by: Devi Raju on Jul 1, 2008 1:48 PM

  • I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

  • What is difference between sy-tabix and sy-index.

    SAP Seniors,
    Can you please let me know what is difference between sy-index and sy-tabix.
    I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
    Thank you
    Anitha.

    HI,
        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    SY-TABIX
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    SY-INDEX
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,
    Pavan.

Maybe you are looking for

  • No of days worked.

    Hi experts, Can anybody plz help me out.In negative time managemnt where is the no of days worked stored. In which table can we find this. The Payroll is processed for an employee. And i need the no of days worked to be reflected on the payslip.

  • How to load the data using a plsql table in ODI.

    Hi All , Can anyone help me on this ? We have a PLSQL procedure which returns a plsql table as out parameter. We are supposed to load the data in to a file using this plsql table (Table type) in ODI. Can this be done using ODI? Regards, Karthik+

  • Help - What is wrong with my code ?

    I have a cfform that does a db search, using a field and a search criteria selected by the user. Here is my code : <tr> <td align="center" colspan="2"> <font size="3" face="Arial, Helvetica, sans-serif" color="003366"> <b>Pick Request Number: </b></f

  • Creation of production order

    hi, What are steps to create a production order thanks

  • Converting a chinese string to UTF-8

    Hello There, In my java application i am supporting more than one language like Chinese, German, English,etc... I am using eclipse tool to develop my project. My problem is i am keeping some Chinese characters like as follows String[]     timeschines