What are different ABAP/4 editors? What are the differences?

hi,
send me replay

hi
good
The ABAP Editor has three different modes:
·       Front-End Editor (source code mode - new)
·       Front-End Editor (plain text mode - old)
·       Back-End Editor (line-based mode)
The three editor modes are fully compatible and interchangeable. Source code created using one mode is properly displayed by the system in all other modes.
The Source Code Mode of the Front-End Editor offers enhanced functionality over the Plain Text Mode by allowing syntax highlighting, collapsing and expanding language blocks, code templates, code completion and so on.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/801a06454211d189710000e8322d00/content.htm
thanks
mrutyun^

Similar Messages

What are views in DDIC and plz mention the difference between them

hi,
What are views in DDIC and plz mention the difference between the different type of views..
1) maintainence view
2)database view
3)Projection view
4)help view
P.S : Good answers will be rewarded with points.

Hi,
The followings are different types of views:
- Database View   (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View    ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View   ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system
Thanks,
Shankar

When putting an event on my iPhone calendar and the time, when it goes to iCloud to my laptop or iPad calendar the times are different. How can I make the time the same?

When putting an event and the time on my iPhone calendar, when it goes to iCloud to my laptop or iPad calendar the times are different. How can I make the time the same?

Welcome to the Apple Community.
Is the calendar you are adding events to on the phone an iCloud calendar.

My cat stepped on my keyboard and now my colors are different and when I look at the screen the lettering is not clear

Help! My cat stepped on my keyboard and now my colors are almost a light neon color and the font is not clear. How do I fix this?

Sounds like the display colors got inverted. If that is the case, you can use the accessibility preferences or use the keyboard shortcut control-option-command-8. I can't help with fixing your cat.

Calendar colours are different in iPhone than what's on my iCal

Why is it that the colours that I assign in iCal on my computer is different than the colours I see for the same events on the Calendar in the iPhone?
Say, for example, I set an event for MISC for a whole day for today, and make it Red in my iCal - when I look at it in my iPhone, it's Orange. When I set it as Green, then it's Blue. When I set it to Black, it's Red. When it's Blue, it's Purple. And so on.
Is there something wrong with my iPhone, or is there a patch?
Thank you

"It's not a bug, it's a feature."
You can't easily fix this - only Apple can do so! They've released a kbase article with the explanation excuse that it is normal for the calendar colors not to match.
There is a workaround, although it is something of a pain. The iPhone will apply calendar colors in the following order: red, orange, blue, green, purple. (If you only sync one calendar, it's blue).
Depending on the colors you want, you first need to create 'blank' calendars in iCal to 'use up' unwanted colors. Then, you need to sync the calendars, one at a time, in color order.
Go to the Info tab (in iTunes with the iPhone connected and selected in the devices list). With the Sync iCal calendars box checked, UNcheck all the boxes and sync. Then, check the box for the calendar you want to be red. Then sync (if you look on the iPhone at this point, that calender will be blue, since it's the only one). Then, check the box for the calendar you want to be orange, then sync. Repeat for blue, then green, then purple.
For example, if I want to have two calendars, Home colored blue and Work purple, I would create three new calendars - empty1, empty2, empty3 - then check the boxes in the following order, syncing between each: empty1, empty2, Home, empty3, Work.
You only need to do this once (as long as you don't delete the empty calendars in iCal) - after that, iTunes 'remembers' the colors and maintains them.
Also, you can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Hi! what will happen to the bookmarks that are different from computer to computer? the synch feature will mixe them together or those on the 1st computer prevail?...

Bookmark synchronization - mixed up after its done?

Hi!
If you choose to synchronize bookmarks all of them will be put together and pushed across devices.
Let me know if you need extra clarification.

Multiplot waveform graph plots are different colors when set to be the same with a property node.

The graphs were working yesterday. I made a few changes to another part of the block diagram and now the graphs do not plot all of the plots the same color. I am using a for loop with a property node with the elements active plot connected to the iteration terminal, and plot color to a color box. My for loop increments programmaticaly from another part of the code to create plots as it runs. I have replaced the graphs with new ones and they will work sometimes.
I am using Win2k and LV 7.1
Thanks,
Brett

Hi bh3560,
Have you tried chaging the color by right clicking on the line in the plot legend. There is an option to change the color of the plot.
Brian K.

HT204053 My apple ID on my phone and Imac are different and neither will let me change them to match. What do I do next?

I am trying to set up my icloud on the \Imac and Iphone 4S and the icloud ID's are different. I want to chnage the phones icloud user ID but can't seem to make it happen. Not sure what to do next

Welcome to the Apple Community..
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

I bought an iPhone in Australia and now I cannot use it in South Africa as the Vodacom network cannot assist me by getting internet on the phone as the settings are different. What should I do to get the phone working in South Africa?

I need to know how I can get my iPhone to work in South Africa. I used it in Australia and was told I could use it in SA...but now I am told the settings are different and therefor I cannot get the internet to work on my iphone. How can I get this working?

Try this
Vodafone (Vodacom) South Africa
APN: Internet
Username for APN: web
Password for APN: web

After scanning my document and converting to Microsoft Word the size of characters are different

After scanning my document and converting to Microsoft Word the size of characters are different and things like puntuation are distorted. How do I get the uniformity like the original?

Of course what lands in the Word file will differ from the viewed picture/image of text created by the scanner.
(The output of all scanners is always an image file. For an image of textual content the best output file format is TIFF.)
So you scan the hardcopy of text.
The scanner output image (picture) is brought into PDF.
At this point the only PDF page content that you can export to Word is the image (nope, no "text" just the image).
Consequently you use Acrobat's OCR feature to do OCR of the image of text.
With a decent paper source, proper resolution and a black and white image you'll get acceptable accuracy of recognition of the pictures of the characters.
(the Optical Character Recognition)
Acrobat's Searchable Image and Searchable Image (Exact) provides output that used text rendering mode 3 (no fill, no stroke for the glyphs).
So, invsible / hidden text.
The third OCR method is ClearScan.
You could play with each of the three to see what goes into a Word file.
Might try export to RTF, DOC and DOCX as well.
Anyway -- What is exported is the OCR output; Not the image of text.
And, of course, the image of the text is not the imprint on the paper that was scanned.
Each step to the way you have some deviation.
Once you have the exported PDF content in a Word file you can use Word to cleanup as desired / needed.
OR
Prop up the hardcopy and transcribe to a Word file.
Be well...

Issue after Migration: ID and Content-ID are different in SOAP Payload

Hi Experts,
I am facing a strange issue in the PI landscape after the migration from XI 3.0 to PI 7.1.
The scenario is from R/3 system to TIBCO System (Proxy-to-SOAP). The TIBCO system receives the file in SOAP Format. The message is sent from PI via SOAP adapter to TIBCO System.
There is a attachment coming from the R/3 System along with the main message and the main payload/message has a "attachment-ID" as a field. Earlier what used to happen in XI 3.0 that the "Attachment-ID" used to equal to the "Content-ID" when the SOAP payload was generated at the TIBCO end. Now after migration, in PI 7.1 the "Attachment-ID" and "Content-ID" are different. We have control over the "Attachment-ID" as it is coming from the source payload but we do not have any control over the "Content-ID" as we are not creating it.
Can anyone of you please let me know how the SOAP Payload is created and how the content-ID gets populated in the Header of the SOAP Envelope? Also, can anyone help me to fix this issue? Is it something which needs to be handled by us or the BASIS Team?
Thanks,
Arkesh
Edited by: Arkesh Sharma on Dec 16, 2011 12:53 PM

Hi Ramesh,
Thank You for the very Helpful Answer. Before I proceed and close this thread, I have one more question which comes to my mind:
I create my own SOAP Header if I apply the solution provided by you then will the rest of the details in the SOAP Header payload will change or do I need to customize it for myself? For e.g., there is a field named MessageId in the SOAP Header. If I write a Java Mapping, do I need to manually populate the MessageId field in the SOAP Header of my java code or will it be automatically populated?
My requirement is to change only the content ID of the SOAP Header Payload and the rest of the fields should remain the same as it is. Is it possible with the approach that you mentioned above?
Thanks,
Arkesh

Consolidated companies KGOI and ' ' are different

Hi team,
While clearing TDS Salary GL system showing below error
Consolidated companies KGOI and ' ' are different
     Message no. F5080
Diagnosis
     The number of the affiliated company must be clear for the selected
     document type for all line items. In this case at least two different
     companies or a company in connection with a business partner who does
     not belong to a company are stated.
Procedure
     If you selected the correct accounts, you must enter the document with a
     document type that allows cross-company posting. Otherwise, please
     correct the entered account.
Actually what we done..........
1) In salary entry which was passed by HR payroll, we have distributed cost from company Code-2011 to another company code-5011.
2) Manse some staff in 2011 cost booked in another company code 5011.
3) in that way system passed automatic inter-company transaction, which is correct.
5) but while doing clearing of inter company GLs & other accounts wherever these type of document selected then system throwing above error.
Please guide use.

Hi
Yes you are correct, transports required through to production for this.
The side affect of this I think is that if there are any documents (containing the document types that you have chnaged) posted while this chnage is in production, it would mean that those documents would be populated by the Partner Business Place (ie second company code) in their header record if they cross company codes. That would mean that they could then later be cleared from the second company code against the first. Also when changing the Intra Posting flag on the documnet type do an F1 Help on the filed and consider the SAPHelp on that topic.
Overall I don't think this would be a big issue. But anyway if you transport this through at a period that is planned as low system activity this should ensure you don't post any docs while the chnage is in place and youy are doing the clearing.
Regardss
Michael

Volume for similar tracks are different but..

I copied a track.aif file and then created new tracks to paste that file into.
The same file with the exact same volume settings and pan settings a few times in one sequence.
Some of them have different volumes and I can't figure what is different about them. They are all the same file and settings.
Does anyone know of any pace where I can look for some secret setting that could have been set by accident?
Also, there are no plugins inserted into any of the tracks.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

Units of measure are different

Hi friends,
I am trying to reverse the material document and its giving me erros as below please suggest how to solve this
Units of measure LB / EA are different
Message no. M7182
Diagnosis
The stockkeeping unit contained in the material document to be cancelled is not the same as the stockkeeping unit contained in the material master record. However, a document can only be cancelled if the stockkeeping units are identical.
System Response
In this case, the system will not cancel the material document.
Procedure
To carry out the reversal, re-enter the given transaction using the relevant reversal movement type.
Regards
Vishal

Hi,
Sales Unit is basically Unit of measure in which the material is sold. A value in this field significes that you want to use a unit of measure differing from the base unit of measure.
If the field does not contain an entry, the system will assume that the unit of measure is the base unit of measure.
Whereas, Base Unit of Measure in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure (alternative units of measure) to the base unit of measure.
You define the base unit of measure and also alternative units of measure and their conversion factors in the material master record.
Now, if you change Sales Unit (as you can't Change Base unit of Measurement*), System will prompt the canged Sales Unit as an alternative to BaseUoM at time of Sales Doc. Creation.
IMP: You can't change UoM in Sales Doc, once subsequent processes are carried-out.
Best Regards,
Amit.
*NOTE: refer link:
http://www.sap-basis-abap.com/mm/changing-base-unit-of-measure.htm
for better understanding.

Is it possible to print current popup screen or area like ABAP container?

Is it possible to print current popup screen or area like ABAP container?

Hi Zhiqiang,
The user can mark the content and select in the browser the option to only print the selected area. Printing, which is controlled from the background, should be done using the server-built-in technologies, such as Adobe integration, SmartForms, etc. That way forms can be printed in i.e. different languages.
Best regards,
Thomas

What are different ABAP/4 editors? What are the differences?

Similar Messages

Maybe you are looking for