What are different between gateway and mangement server in scom ?

Hi all,
can anyone let me know What are different between gateway and mangement server in scom ?
thanks,
Sengottuvel M

Hi,
Hope this can answer you question
About Gateway Servers in Operations Manager
http://technet.microsoft.com/en-us/library/hh212823.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

What are differences between clustering and partitioning?

Thank you for reading my post
Can some one let me know what is different between clustering and partitioning?
What i think is as follow:
In clustering we have one storage (one hard disk for example) and several instances which use that storage to server the applications
in partitioning, we have multiple instances and each of them has its own storage (hard disk) but all of these instances and hard disks serve one application.

The word "cluster" has different meanings in Oracle.
Another kind of cluster is a database object where
master and detail rows are stored together in the
same block. Table joins are very efficient, but
reading data from one table and not another tends to
take longer. These kinds of clusters are vary rarely
used.Do not forget single table sorted hash cluster!

What is different between #INITSEG and INITSEG in file bootsect.s?

I read the file bootsect.s,I think the INITSEG is constant,
and I think #INITSEG and INITSEG are always equal 0x9000,
but why are they different usage?
Look:
.text
BOOTSEG = 0x07c0
INITSEG = 0x9000
entry start
start:
mov ax,#BOOTSEG
mov ds,ax
mov ax,#INITSEG
mov es,ax
jmpi go,INITSEG
I want to know what is different between #INITSEG and INITSEG?
How to use #INITSEG and INITSEG?

I think you are currently mixing up the two definitions. I think the assembler here uses the hash prefix (#) to declare values and a clean number for addresses and offsets.
... http://www.oldlinux.org/Linux.old/kerne … bootsect.s
BOOTSEG = 0x07c0 ! original address of boot-sector
INITSEG = 0x9000 ! we move boot here - out of the way
start:
mov ax,#BOOTSEG ! set register ax to #BOOTSEG = value 0x07c0
mov ds,ax ! set register ds to register ax = value 0x07c0
mov ax,#INITSEG ! set register ax to #INITSEG = value 0x9000
mov es,ax ! set register es to register ax = value 0x07c0
! ds and ax cannot be filled directly, the value has to be set to the accumulator register (ax) first I think.
! Thats the reason for 4 lines instead of 2
mov cx,#256 ! set register cx to #256 = value 256
sub si,si ! set register si to 0
sub di,di ! set register di to 0
rep ! call the command in the next line
movw ! move cx (256) words = 512 bytes from ds (0x07c0) to es (0x9000)
jmpi go,INITSEG ! jump to the address go + 0x9000. go is the offset of the label "go" to the start of the moved memory segment
go: mov ax,cs ! here is the label "go"
Edit: That should be as86 (man as).
Last edited by progandy (2013-02-21 13:25:03)

What is different between Analytics and VC Forum?

Hi Experts!
I don't know what is different between Analytics and VC forum in SDN. of course, Analytics is not Visual composer.
But, I guess that most of analytics questions will be related to Visual Composer in this Analytics Forum.
How about your opinion?

Hi Young
Analytics is business process oriented and thus it's domain is BPX hence it is placed under forum for BPX(Business Process Expert).
VC is a tool and it is in technology domain.
First we discuss a scernario based on particular business process. Then we prepare detailed level of analysis-reporting and actionable analytics this business process would need. Then we use tools like VC to accomplish this actionable analytics.
Hope this helps
Regards
Pradip

What's Different Between ODI and FDQM ?

I need to know What's Different Between ODI and FDQM ?

At is simplest ODI is an enterprise scale ELT tool that can cope with moving very large amounts of data bwteen heteregeneous systems. It requires a fair degree of technical knowledge to use well and that the user is pretty competent with SQL. It is not really an end user tool and the jobs tend to be lights out scheduled processes with a limited user interface for executing these jobs. FDQM is more of a data quaility tool which gives the average end user the out of the box functionality to be able to transform and load data into various target systems. It is not designed to move very large amounts of data efficiently i.e. multi millions of lines of data like ODI. However it does have a rich user interface that provides an easy to use mapping engine, a repeatbale controlled data load process and has a host of in built reporting and audit features which would have to be built from scratch in a tool like ODI

What's different between OWB9i and Discorver4i?

1.What's different between OWB9i and Discorver4i?
2.Discorver4i is ROLAP or MOLAP or HOLAP?

1.What's different between OWB9i and Discorver4i?
OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
and Transfer or Load (ETL). Discoverer is a reporting tool.
2.Discorver4i is ROLAP or MOLAP or HOLAP
Discoverer 4i is a ROLAP tool. Relational OLAP.
Christopher
www.iloveapple.com

What' s different between color and swatches?

what' s different between color and swatches?

1.What's different between OWB9i and Discorver4i?
OWB9i is a tool used to create data marts or data warehouses. You would use it to create the ETT Extraction, Transformation,
and Transfer or Load (ETL). Discoverer is a reporting tool.
2.Discorver4i is ROLAP or MOLAP or HOLAP
Discoverer 4i is a ROLAP tool. Relational OLAP.
Christopher
www.iloveapple.com

What are different vru types and their functions

Dear experts,
what are different vru types and their functions

Hi,
just hit the Help button in "Network VRU Explorer" in ICM Configuration Manager.
If you wish to see even more details, take a look at the following article:
http://www.ciscopress.com/articles/article.asp?p=1822061&seqNum=2
HTH
G.

What's different between 32bit and 64bit ?

Hi all,
What's different between 32bit and 64bit for Oracle Database 10g Release 1 ?
such as "Oracle Database 10g Release 1 (10.1.0.2) for Microsoft Windows (32-bit)"
and "Oracle Database 10g Release 1 (10.1.0.2) for Microsoft Windows (64-bit Itanium)"
Thanks
fish

What's different between 32bit and 64bit ? oooh, about 32 bits ;)
what is different between (x64) and (64-bit Itanium)This really is the short of question google could answer better but in a nutshell Itanium is the Intel 64bit chip (AKA the Itanic, due to its troubled history). Whereas x64 is the appelation given to AMD's 64bit Opteron chips; I believe x64 was coined by Microsoft but Sun use it as well.
Cheers, APC.

What are differences between Java and C#

What are differences between Java and C#?
I was looking at C# and it looks very similar to java, does anyone have any input on what the primary differences are?

C# has ventricles, being a more modern, hip,and
stylin language.Yeah, but it can't use them properly unless youbolt
on an after-market turbo charger and paint some
go-faster stripes.
Java doesn't need ventricles, as the language is
built as a bifurcative scrobbidibbit from theground
up.
And here I thought you were smart.The ventricles add power on the backswing and keep
down the humpty-B count, and those stripes don't
really do much except to impress the PHBs. A
ventricle here and there wouldn't do Java anyharm.
Oh, I see.
I didn't realize you were concerned with humpty-B. So
I suppose you put 17 firewalls in front of your VM's
Jeffries tubes too huh? And measure productivity in
fleems per wonkle?
That may have worked back when you carved FORTRAN on
stone tablets, and then went to look for a nice young
lady to club and take home. But modern software
development techniques demand a focus on the
regressive thromboid paradigm, and ventricles only
get in the way when you're trying to calibrate that
against the latest fractal suppository data.At least I have actual experience in carving FORTRAN on stone tablets, so I know what I'm talking about. (The clubbing was the other way around but that's neither here nor there.) As for your regressive thromboid paradigm, regressive is exactly what it is. Progressive paradigms, whether thromboid or rhomboid, require ventriculation to achieve their maximum potential.
And I suppose if you're still using those Jeffries tubes in your VM, it's not surprising that it's humptied to the max. Try installing Apache Fallopian if you really want to dehumptify it, or Apache Eustachian for 64-bit VMs.

What is different between JES and Java EE SDK ?

Hi
Thank you for reading my post.
can some one tell me what is different between Java EE SDK and JES ?
What i think is:
- Both of them support Java EE 5.0
- Both of them has access manager 7.1
Can we develop application on JES using netbeans IDE ?
What technicall benefits JES bring that Java EE SDK does not?
Thanks

The Java EE SDK is a developer kit that includes Application Server 9 PE,
as well as early access to other technologies and tools related
to Java EE 5 development. It is primarily targeted at developers
for doing development and prototyping -- although you can also
use it in production.
Java Enterprise System is a larger integrated stack of software and
services sold under a subscription model. The current release includes
Application Server 8.2 EE (and is therefore J2EE 1.4 based), but also
includes a large number of other products such as Web Server,
Directory Server, Portal Server, etc. For more details see:
http://www.sun.com/software/javaenterprisesystem
Note that it is an unfortunate co-incidence that the current release
of Java Enterprise System is Java ES 5, which has nothing to do with
Java EE 5!
Yes you can use Netbeans to develop applications for Java ES.
So comparing the two is really comparing apples to oranges. If you
are a developer and want to develop Java EE 5 applications than the
Java EE SDK is likely best for you.
If you are interested in a broader portfolio of software and servcies
including deploying J2SE 1.4 applications than Java ES may be a good
match.
Joe

What's different between CUVC and MeetingPlace ?

I'm a new guy for Video solution of Cisco and i would like to know what the different between cisco unified video conferencing and MeetingPlace.
Please help me to clear about both solution thx a lot.

No one can answer T^T so saddd . wait some one

What's different between statfulacl and detailedacl

i just confused that what's different between stateful ACL and Detailed ACL in Hyper-V 2012R2, i know stateful ACL will create return traffic automatically
for example：
Add-VMNetworkAdapterExtendedAcl –VMName “ApplicationServer” –Action “Allow” –Direction “Outbound” 80 “TCP” –Weight 100 –Stateful –Timeout 3600
if i delete “-statful” and “timeout", then what‘s will happen，any performance issue or something else？

Looking up the PowerShell command in TechNet will explain each parameter. As will the PowerShell command Help
Add-VMNetworkAdapterExtendedAcl -parameter Stateful.
http://technet.microsoft.com/en-us/library/dn464289.aspx
If you do not understand the explanation provided by TechNet or Help, please post your question about its definition back here.
. : | : . : | : . tim

What is different between connection and session parameters of dispatcher

I can not find any info about the difference.
I think "connection" is the connection between a dispatcher and a client, and "session" means the connection between a dispatcher and an instance.
but I am not sure about it. am I right?
there is another parameter named pool, it is used for what?
the pool for connections(i.e. "session") between a dispatcher and an instance?

I can not find any info about the difference.
I think "connection" is the connection between a
dispatcher and a client, and "session" means the
connection between a dispatcher and an instance.
but I am not sure about it. am I right?
there is another parameter named pool, it is used for
what?
the pool for connections(i.e. "session") between a
dispatcher and an instance?Hey
After authentatication username/password database session starts whereas how user request will be handel it will be defined by conection.Either dedicated or shared Server.If U have not enough resource to handle user request and also you have application that is not using very long runing query then think to use shared server conection and if U have enough resource and very long runing query or transaction think about Dedicated Server.Both are different "SESSION" and connection.Conection determine hove request will be handled either by sharing resources(session memory,run time sql,bind variable) and
process through (DSPATCHER and SHARED SERVER ) process or every user will have their own dedicated resources or Server process.
Both in both cases after user/password session get created .it is the conection from client to database.
regards
Tinku

Colors are different between Lightroom and Photoshop Elements

I have a new monitor and I have the SyderPro4 calbration software. My monitor is the Dell UltraSharp U2713HM. When calibrated with the Syder my colors are different when I go into different programs. The same photo looks different in Lightroom than it does in Photoshop Elements. When I export the picture from Lightroom to Elements the picture becomes very orange. I have already talked to Dell and to Datacolor about my issue and they both are telling me this shouldn't be happening. When I uninstall my calibration software my problem goes away, and the colors of the images stay consistant between the two programs. Does anybody have any advice to what maybe wrong?

I am having this problem too.
my site www.redsmartie.com looks fine on everyone elses computer but on mine the red background #660000 is not displaying right on the jpg images
see here http://homepage.mac.com/redsmartie/colourerror.png
I have rgb colour profiles managed by a Pantone Huey device and haven't previously noted a problem. This was added recently so I recreated the images which corrected things on my screen but made the red around the images too dark for everyone else.
The images were created in Photoshop so I changed the photoshop profile back to CinemaDisplay that it previously was on and now everyone else is ok but my screen shows the red around the images much to light.
I really need some help with this as its a disaster waiting to happen on work I do for other people, especially if I'm producing work that looks right on my setup but is wrong for everyone else!
Dual 2GHz PowerMac G5 (plus 15" G4 PowerBook) Mac OS X (10.4.6) 2.5 GB DDR SDRAM, 2x160GB SATA, 23" Cinema HD Display

What are different between gateway and mangement server in scom ?

Similar Messages

Maybe you are looking for