What are dimensions of PR68-68F connectors?

I need to get a DAQ cable into my temp chamber. The connector on the shielded cables are too large to fit
in port of the temp chamber so I was thinking about using a PR68-68F. What are the connector's dimensions?

Hello pfecteau,
I was able to find a drawing for this and I attached it below. I hope this is helpful!
Regards,
Russell
Applications Engineer
National Instruments
http://www.ni.com/support
Attachments:
Drawing_PR68-68.zip ‏37 KB

Similar Messages

  • What are the tables Oracle EBS connector can connect to?

    Hello,
    Requirement
    As part of the project requirement for Oracle EBS application, we have the concept of BUYER account (PO_AGENTS) and Supplier account (PO_VENDORS). When the account has to be disabled from FND_USER and HR foundation table, the account has to be disabled (or removed based on the requirement) from all linked tables "PO_VENDORS" and "PO_AGENTS".
    Questions
    1) Does the out of the box Oracle EBS connector handles removing users from the tables "PO_AGENTS" and "PO_VENDORS" apart from "FND_Users" and "HR foundation" table?
    2) If no, what are the recommendations for achieving the above requirement?
    Thank You!

    No, OOTB the connector will not revoke the user entry from tables like PO_AGENTS etc .. You can customize the connector to do that .
    Explore the stored procedure which can revoke entries from the mentioned tables and wire it via a adapter .
    Regards
    Suren

  • What are the dimensions of the macbook pro 13 inch shipping box

    What are the dimensions of the brown shipping box that the 13-INCH MBP is shipped in including the weight. Please give the dimensions in the order Length, Height, and Width .

    I have one in front of me, albeit 2009. 14 x10.5 x 3". This was the shipping box it came in; there wasn't an enclosing box.

  • What are the dimensions of the Apple wired keyboard?

    What are the dimensions of the Apple wired keyboard?

    K1
    I am constantly amazed at our beloved Apple!
    Not only lack of info, but SysReqs seem a bit restrictive? How can a plain ol' USB keyboard require OSX10.6 or better, yet NOT support USB3.0 AND require some Apple software driver update? [sound of exasperation -> sigh]
    best as always
    CCC

  • What are the appropriate document/stage dimensions in Flash for tablet optimized apps?

    What are the appropriate document/stage dimensions in Flash (width x height in pixels) for tablet optimized apps?
    (Dec. 2013)
    Using Flash and AIR for Android/iOS I would like to develop a educational interactive title optimized for tablet PCs, hopefully both the Android but finally also the iOS platforms. With so many tablets on the market today and with different resolutions (and even aspect ratios) I have difficulty deciding what document/stage size to set for my project/app. I have been experimenting with an Android Google Nexus 7 and Samsung Note 10 tablets and discovered that Android automatically resizes the app's stage to fully fit the screen of the tablet BUT this creates the following two issues for me:
    if the stage/document size in Flash is too small and I include bitmaps when the app's stage is enlarged to fit the tablet screen the bitmaps look pixelated.
    If I make the stage dimensions too big so that there is no bitmap pixelation because the bitmaps will be shrank instead of enlarged, I am afraid that on some older tablets with slower processors the app may be too slow to run (but I have to say that I did not experiment with very large stage dimensions yet).
    Until today I had looked at some of the most commonly used tablets on the market and their resolutions Google Nexus 7, Samsung Note, iPads etc and was inclined towards using a stage size of approximately 1280 x 720 pixels which I considered a medium solution, but now the new generation tablets came out (Nexus 7 gen 2, iPad Mini with Retina, iPad AIR etc) with much higher resolutions so I don't know what size to use now. Anybody has any suggestions?
    I would appreciate any ideas and suggestions on this matter.

    You explained your problem well enough that looking at the picture won't matter.  It looks like you found out too late that one of the first things you should do when you create a Flash file is set the movie properties, which include the dimensions and other things like background color, frame rate, publish settings, etc.  While the string that I just listed can pretty much be revised anytime, the dimensions should really be done before anything else, when possible.
    One way to go about resizing is to leave the file as is and specify the larger dimensions in the html page code.  This could end up reducing the quality of any bitmaps you might have in the file(s) since you would essentially be enlarging them, but any Flash drawn elements will resize cleanly.
    If you resize the stage, then you don't have much choice but to resize and relocate everything in it keyframe by keyframe.

  • What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?

    What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?
    I read an article and cannot find it that said something about trying to make it 2million pixels and JPG to keep it small, but what exactly should the dimensions be that I ultimately import?  Is there some kind of a "density" setting I have to use, as well, when exporting from Photoshop, for example?

    See Optimizing performance in your iBooks Author books
    Density is discussed by Apple in this context as 'dpi'...
    132 - iPad 2
    264 - new iPad
    At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
    Good luck.
    Ken

  • HT2506 how do you view what the dimensions of a document are in preview?  i.e. 8.5 x 11 or 11x 17

    How do you view what the dimensions of a document are in preiew?

    Right or control click the document file then click Get Info.

  • What are the photo dimensions in the iPhoto book?

    I'm scanning 35mm slides and want to know what size I should set my output. I'm looking in the iPhoto Help, but don't see anything about the printed page dimensions.
    Currently, my scans show up in Photoshop's image window as: 4"x6", 256 dpi and 1500x1000 pixel size.
    I think/hope this will be OK for 4, 3 and 2 images per page, but I want to rescan for the pages that will only have 1 picture.
    Should I set my output to the actual physical size of the picture on the printed page of the book? If so does anyone know what the dimensions are for 1, 2, 3 and 4 per page?
    Using VueScan software, I can set the input Scan Res from 300 to 4800 dpi. Is 600 dpi enough? Or should I go to 1200 or more?
    My Canon LiDE 600F scanner says it handles up to 48 bit rate. Should I set the Bits to pixel to this?
    Thanks for your assistance,
    Steven

    Steve:
    Setting the print size in Vuescan will adjust the dpi of the resulting file so that the photo is set to print that size. The scan dpi is what sets the number of pixels to be created during the scan. The print size just adjusts those pixels in the file so that an application like Photoshop will read it as that print size and adjusts the dpi as read to fit that size. If the print size it larger than the scanned image the dpi will be less than the scan dpi. It the print size is smaller conversely the dpi will be greater than the scan size.
    If you think that you might use a photo for a full page layout in the iPhoto book, 8.5 x 11, you would want to scan at a resolution that would give you 3300 pixels in the largest dimension. For a slide that would be 3300/1.4 or about 2400 dpi. The books are printed at 300 dpi so a 2200 dpi on the maximum dimension would fill the bill for nearly all but a full, one photo per page, layout. And then it would still come out pretty good.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • What are the allowable dimensions of screenshots for ibooks?

    What are the allowable dimensions of screenshots for ibookes?  I know the requirement is very specific.
    And what is the best tool to do so?  I tried to use the native screenshot tool but it is hard to make the size precise.

    Minimum size is 600 pixels in the shorter dimension. Maximum size is 2048 pixels in the longer dimension. That's what you get when you take a screenshot on a new iPad. (There is no point in having something larger than this.) Screenshots taken with an older iPad are 1024x768.
    For my book, I just took screenshots on an iPad 2 (1024x768) and used those. They were accepted without complaint.
    Michi.

  • What are the pixel dimensions for creating an Apple ibook book cover?

    I'm trying to create a book cover for Apple ibooks, what are the pixel dimensions requirements?

    Thanks again.
    Apple seems to have made it more confusing than it should be.
    As an aside, the Apple documentation contradicts itself.
    Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode.
    This clearly says the shorter side must be at least 1400 pixels. The next sentence says this:
    For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide.
    That doesn't make sense, seeing that the shorter side is supposed to be at least 1400 pixels, meaning it should say "1400 x 4900" for the same aspect ratio.
    ...I did notice this too.
    So, if as you say, that the Cover Art and Cover image terms are the same and the 2 million limit does not apply, then it is unclear to me why Apple sent this message to me about cover file being rejected
    "Action Required: Your book could not be delivered to the iBookstore.
    The following images are larger than two million pixels and must be resized:
    Full ePub: Cover_xyz.jpg "
    I'll probably need to have the cover file in epub and Cover Image for Asset in iTunes Producer be named differently (but be copies of the same file) so I can understand which one is the "problem" file.
    And finally, why does Apple refer to Cover Art twice here and then end in last sentence with Cover Image if they are the same ( and if they are the same why not state "this cover image").
    "Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode. For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide. For best results, deliver the largest pixel dimensions possible. When possible, match cover art to the cover contained in the book file. The 2 million pixel maximum does not apply to the cover image".

  • Can anyone tell what are the fact tables and dimension tables available in banking domian

    what are the fact and dimension tables available in banking domain.
    maximum how many fact and dimension tables we can keep in the banking project

    Hi Srikanth Korrapati,
    Please have a look on this book
    The Data Warehouse Toolkit: The Complete Guide to Dimensional Modeling By Ralph Kimball & Margy Ross.
    Here is the below link completely about the Banking Case Study from DW Toolkit.
    The Data Warehouse Toolkit: The Complete Guide to Dimensional Modeling - Banking Case Study
    Hope this will help you out
    Regards,
    Akhileshkiran.

  • What are the Photoshop design dimensions for Dreamweaver fluid grid layout?

    If I were to build a website using Dreamweavers fluid grid layout, what are the dimensions in Photoshop I should be designing with?

    FluidGrid Layouts are based on % widths; not fixed pixel widths.   As such your PShop design comps will need to be planned with these device widths in mind.
    320px - 480px wide = mobile
    481px - 768px width = small tablet
    600px - 1024px width = large tablet
    1024px - 1233px width = desktop/laptop
    Nancy O.

  • What are the dimensions for a Muse Phone background?

    What are the optimum dimensions for a background in Muse when doing a phone layout?

    this is a list of all mobile and smartphones incl. screensize/resolution  http://cartoonized.net/cellphone-screen-resolution.php

  • What are all the dimensions that have security enabled by default?

    Hi,
    can any one tell - What are all the dimensions that have security enabled by default in planning application
    Thanks,
    Kumar

    Accounts, Entity, Scenario, Version
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • FAQ: What are the JDI (Just Do It) features in Photoshop?

    What are JDI features?  They're "Just Do It" features: small features that don't take a lot of time to implement or test and seem like an obvious improvement.
    JDI list for Photoshop CC
    JDI features in Photoshop CS6, by category:
    Automation
    Contact Sheet II has been restored as an Automate option
    PDF Presentation and Layer Comps to PDF have been restored as Automate options
    Brushes
    Add ability to record brush strokes in actions with "Allow Tool Recording" option
    Brightness/contrast slider for textures when painting
    Brush projection for static tips
    Brush tip cursor reflects brush pose and jitter for round and captured tips
    HUD brush resize and hardness can now change opacity - [Control] + [Option] + click drag up/down with General>Preferences> "Vary Round Brush Hardness based on HUD vertical movement" unchecked
    Increase maximum brush size to 5000px
    Change color dynamics to per stroke instead of per tip (user option for old behavior)
    Channels
    Enable Split Channels for documents with single layer (so you can split simple transparency)
    Color Picker
    allow clipboard paste into hex field with # in contents (i.e. #aabbcc), or 0x (i.e. 0xAABBCC)
    allow shortcut hex values (i.e. #123)
    Eyedropper
    Add ignore adjustment layers options bar item for the eyedropper
    New mode for eyedropper to select layers current and below
    Show the sample size popup for the various eyedropper tools (black point, white point, etc.)
    File Formats
    Allow for reading more bit depths in TIFF files
    Give the user choices regarding how they want transparency treated in OpenEXR on file open and save
    Read BIGTIFF format (TIFF files over 4 Gig)
    Read common stereo image pair formats (JPS, MPO, PNS)
    GPU
    Increased GPU stability by prequalifying GPUs on the fly before use
    Grammar
    Grammar policed throughout app
    Use consistent grammar style in the title of dialog windows (no commands such as "Choose a color:")
    Image Resizing
    Auto-select the best resample method based on the type of resize (bicubic-automatic)
    Importing
    (Macintosh only) Import images from devices provides ImageKit scanning and camera acquisition support
    Layers
    Add bicubic sharper & bicubic smoother options when free transforming layers (menu in options bar)
    Add dither options to Layer Styles for Gradient Overlay and Gradient Stroke
    Allow 00 or Shift 00 to work when setting layer/fill opacity (previously no way to get 0%)
    Allow changing color labels on multiple layers at once
    Allow changing of blend modes for multiple layers at once
    Allow locking of multiple selected layers
    CMD+J to duplicate selected layers and layer groups (in addition to layers)
    Layer tooltips to include layer name (if defined)
    New command to rasterize layer effect into layer, merging the selected layers into themselves (Rasterize Layer Style)
    Opt+click on toggle arrows (groups and effects)in layer panel should close all targets
    Reorder effects in the layers palette to match the Z-order style/blend mode (bottom most effects in terms of blending order, drop shadow is below the other effects)
    Show blend if/Blending Effects badge on layer if they are not default values
    Show correct opacity and blend mode values for hidden layers
    Tab goes to next layer on inline layer rename, SHIFT + TAB goes to previous
    When creating a shape layer, the layer name should not be like "Shape 1" but instead reflect the tool named such as "Rectangle 1"
    Liquify
    Add option to load last mesh
    Increase maximum Liquify brush size to 15,000
    Resize Liquify brush with shortcuts: bracket keys [ ] now match same increments in Photoshop
    ctrl (win) / cmd (mac) switches to magnifying glass
    alt + right click + drag to change brush size (win)
    ctrl + alt + left click + drag  to change brush size (mac)
    Masks
    Enable Invert and Threshold adjustments for masks in 32-bit/channel
    Plugins
    Hold SHIFT during startup to disable Optional and 3rd party plugins
    Presets
    Add New Document presets for common devices (e.g. iPhone, iPad, etc.)
    Add new Gradient Map presets for traditional print toning and split-toning
    Sticky reorganization of tool presets (changes persist after relaunch)
    New HDR Pro presets from RC Concepcion and Scott Kelby
    Printing
    Add "Edit" button for the description field in the print dialog
    Allow print dialog and print preview window to be resized
    Allow user to change the "preview well" background color in the print dialog
    Allow user to manually position the printed area on the page
    Hide color profiles that are inappropriate for currently selected printer when using "Photoshop Manages Color"
    Reintroduce "Print selected area", allow user to modify selection in print dialog
    Save
    Add warning message that 16-bit images cannot display their file size in the Save as JPEG dialog
    SDK
    Add ability to access tool name associated with the tool preset name via scripting
    Add the ability to return an array of guides in a document from the scripting SDK
    Selections
    Make the marquee, lasso, and mask panel feather values support decimal places like the feather dialog
    Remember feather radius when showing dialog for selection from a path
    Transform
    Don't hide smart object icon when transforming a layer
    Improve dragging of vector curves
    Rotate 90 with even x odd pixel dimension to not land on a half pixel position
    Preference to disable auto-rotate on open
    Type
    Add command to insert "lorem ipsum" for type
    Added Gamma rendering parameter for better text rendering
    UI
    [Windows] New/open document to context click on a document tab (has always been on Mac, now Windows too)
    Add "Don't show again" checkbox to Purge warnings
    Remove the app bar and reduce the drag/app bar over 30%

    1. Mainstage - Even though I probably won't use Logic for live performance much, I love how simple, clean, and intuitive the interface looks. I will probably use this when composing as it seems to be one of the easiest ways to route drum pads, create keyboard layers, etc. really quickly, and the interface is very inviting.
    2. Delay designer looks really fun. I remember spending 30 minutes once in Sonar trying to get the stupid delay to do a really simple thing. I finally gave up and layered the audio data to make my own delay because it didn't give me enough control to make it happen in the plugin. It looks like I could have just drawn it into the Delay Designer and been done with it.
    3. Import from Garageband - Not a new feature, but I love using Garageband as a musical notepad when all I want to do is create something simple or jot down an idea. In this period, I don't need all the features of Logic, but I will eventually, and then I just open it up in Logic and get more advanced.

Maybe you are looking for