What are dynamic reports
hi
can any one tell me about dynamic reports.and how to create them?
thank u
bye
surya
hi,
Basic ABAP syntax for manipulating reports dynamically:
INSERT REPORT <prog> FROM <itab>.
READ REPORT <prog> INTO <itab>.
DELETE REPORT <prog>.
follow this link for sample program.
http://www.sapdevelopment.co.uk/tips/dynamic/dyn_prog.htm
regards,
Ashok Reddy
Similar Messages
-
Hi all,
What are Adhoc reports in HR?
Best Regards
Akshay
Moderator Message: Interview questions are not allowed.
Edited by: kishan P on Nov 10, 2010 7:05 PMHi,
It may be difficult to provide a list of business scenarios across an enterprise where adhoc reports are used. However, In generic terms, adhoc reporting is used when your business users are not just information consumers, but are more of analysts having special reporting needs which are non-generic in nature, that BI teams can not provide pre-configured reports. (Typical scenarios where you have a global BW system and you want to let the local users create their local adhoc reports)
This, of course means, business users should have the requisite know-how to create reports and should be equipped with all relevant info( like authorizaions, rules for information dissemination etc.).
I always preferred creating queries at the most generic level and let the users create query views (instead of letting business users create adhoc reports).
Hope this helps. -
What are the reporting changes in BI 7.0 and sap 3.5
Hi,
what are the reporting changes in BI 7.0 and sap 3.5.
can anybody know the other name of BI 7.0.
what are the min,max no of load times.
what is the load timings if the onsite office is at USA.
Thanks & Regards,
cheta.Hi Cheta,
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
check these link's
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
In this one - check out slides 28-34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
Check this link to get PDF doc on SAP BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
check the presentaion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
Web Blogs & Threads in SDN
/message/502929#502929 [original link is broken]
/people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
Refer these links
There is lot of Info Reg BI7.0 including Reporting also.
Regards
Karthik -
What are the report-relevant settings in the hierarchy maintenance?
What are the report-relevant settings in the hierarchy maintenance?
Hi,
See these links.
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
assign points if this helps.
Thanks.....................
vasu................... -
What are the Reports are Avialable for Kuwait Localisation ..
Hello sir,
We are Implementing HRMS with the Version of 12i for the Kuwait localisation, I am wondering that what are the Reports are available in the Kuwait Localisation. pls help me on this ...
with regards
User600722Refer to Note: 231369.1 - Oracle HRMS Reports (HTML listing)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=231369.1 -
What are crystal reports and dash baords?
hello friends,
what are crystal reports and dash baords?
when they use?
navagation steps for crystal reports and dash boards?
bye
srinuHi Srinu,
Crystal Reports:There are a lot of threads concerning Crystal Reports. Just make a search!
Check this link:
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D43%26threadID%3D44917%26messageID%3D453030%23453030
Dashboards:The Web report in BW each have specific URL. But for the users it is difficult to remember the URL.
So they create a Dashbord which essentially displays the main page from where you can navigate to the report that you want. The dashboard typically may contain chart also. The dashboards are now designed in Enterprise Portal. The dashboard main page would be different for different users based on their role.
Bye
Dinesh -
What are the reports we can get from OPM Quality
Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
JonPl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini -
What are compliance reports inUS-Payroll?
what are compliance reports inUS-Payroll?
Hi Rakesh,
There are many USA payroll related compliance reports but major ones are Tax Reporter (PU19 transaction), Garnishment Reports, 401K reports and New Hire Reporting.
You should be able to find them under Human Resources-->Payroll--> Americas-->USA under different sections.
For you further assistance I have SAP link mentioned below which tells you more about these and many other US Specific compliance reports.
http://help.sap-ag.de/saphelp_globext607_10/helpdata/en/2a/3f5493538411d1898a0000e8322d00/content.htm?frameset=/en/f4/8c3d306c2a11d686b60000863e02a8/frameset.htm
Thanks,
Ameet -
What are hyperion reports?
Hi da,
Iam just wondering what are Hyperion Reports? I mean to say what is called in Hyperion Reports in newer version ?
In reporting and analysis I can see
1. Financial Reporting
2. SQR Production Reporting
3.Interactive Reporting.
So what is Hyperion Reports consists of? all these 3 reporting tools?
And I would appreciate is there any usefull link or file to know what older versions are called in newer version (like Hyperion Aanlyzer is called in newer version Web Analysis).
Thanks and Regards,
Sri.Hi,
They are all different reporting tools that you have mentioned which come under the banner of reporting and analysis, these can all be accessed from the workspace.
I always consider hyperion reports to Financial Reporting, it did used to be called hyperion reports.
Web Analysis used to be Analyzer
The rest have kept the name the same.
All high level information is available here
http://www.oracle.com/appserver/business-intelligence/docs/hyperion-financial-reporting-datasheet.pdf
http://www.oracle.com/appserver/business-intelligence/docs/hyperion-interactive-reporting-datasheet.pdf
http://www.oracle.com/appserver/business-intelligence/docs/hyperion-production-reporting-datasheet.pdf
http://www.oracle.com/appserver/business-intelligence/docs/hyperion-web-analysis-datasheet.pdf
Cheers
John
http://john-goodwin.blogspot.com/ -
What are the reporting performances can we do?
What are the reporting performances can we do?
Hi,
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Hope this helps.
Thanks,
JituK -
What are the reporting options
hi
what are the reporting optionsHi,
in addition to the report XXX we can add
i)No standard page heading.
ii)message class name
iii) line size
iv)line count
for eg:
REPORT ZXXXXXX no standard page heading message-id zXXX line-size 124 line-count 100.
regards,
vineela -
What are dynamic vi's? The ones that are calling or the ones that are being called? If a vi contains open vi reference does it become dynamic? Or the one that is being called through this function is the one that is dynamic.
I am trying to build a stand-alone executable (from a multi-file project) and I need to know which files to put into Project Explorer → Build Specifications → Application (exe) → Properties → Source Files → Dynamic VIs ans Support Files.
Are all vit's dynamic even if it does not contain open vi reference?
Message Edited by rashid19672008 on 03-03-2008 08:48 PMrashid19672008 wrote:
If a vi A calls another vi B, form whitin itself, which one would be called dynamic, A or B?
I think Ben has answered you already.
"An example of this would be a VI opened using VI Server."
So, in all probability, B is dynamic, unless & until it is not placed as a SubVI inside A.
- Partha
LabVIEW - Wires that catch bugs! -
What are BI reports and ABAP reports and the difference between them ?
What are BI reports and ABAP reports and the difference between them? please explain me in detail and let me know if you have some documentation about it.
Thank you in advance!
Steve JobsDo we have to write custom code for the ABAP reports? Do you have any documentation about it?
Thank you.
Steve Jobs -
Hi Experts,
I works on web Dynpro JAVA and i want to know what is crystal reports, and how can i use them with web dynpro jAVA
Regards
UpendraHello Upendra,
To be start with, I would like to explain you something about crystal report.
-Crystal Reports is designed to work with your database to help you analyzeand interpret important information.
-Crystal Reports makes it easy to create simple reports, and, it also has the comprehensive tools you need to produce complex or specialized reports.
-Crystal Reports is designed to produce the report you want from virtually any data source.Formulas, cross-tabs,
subreports, and conditional formatting help make sense of data and uncover important relationships that might otherwise be hidden.
-Geographic maps and graphs communicate information visually when words and numbers are simply not enough.
-The flexibility of Crystal Reports doesnu2019t end with creating reports u2014 your reports can be published in a variety of formats including Microsoft Word and Excel, E-mail and even over the Web.
-Advanced Web reporting lets other members of your workgroup view and update shared reports inside their web browser.
-Application and web developers can save time and meet their users needs by integrating the report processing power of Crystal Reports into their database applications.
-Support for most popular development languages makes it easy
to add reporting to any application.
-Whether itu2019s the web master in IT, the promotion manager in marketing, the database administrator in finance or the CEO, Crystal Reports is a powerful tool designed to help everyone analyze and interpret the information thatu2019s important to them.
Thanks,
Chinmay -
What are crystal reports ?
Hello,
Please explain me wht are crystal reports i dont know even wht are they. I have got a task to prepare a crystal report, please do help me achieve this.
Points will be awarded for the helpful answer.
ThksHello Venkat
Crystal Reports is a product to build powerful reports [http://www.businessobjects.com/]
Further reading: [Administrating Crystal Reports|http://help.sap.com/saphelp_nw04/helpdata/en/51/ddd33b1ed4b47de10000000a114084/content.htm]
Regards
Uwe
Maybe you are looking for
-
My daughter and I share an apple account. She has an iPhone (she's had it about a month) & I have an iPad. All of her app downloads and iMessages are showing up on mine. If I set her up her own Apple ID is there a way that she won't lose all of the t
-
in which boot camp support software I can install the drivers for win 7 32 bit. my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers. also my macbook pro model is MC723.
-
Architeture influence MDM Data Modeling??
Hi, I understand If I have MDM SP05 then I can utilize some good functionalities of EP, Java Webdynpro or SAP NW CE, Webservices and BPM. and If same applications I integrate with MDM SP03 then I will loose this functionalities. Will this have any i
-
Reading multiple PWM using a single counter
Hi everyone. Not really sure if this goes in digital i/o or counter/timer but here it is. I'm trying to design a system where i send out an signal from a transducer, and have other transducer measure the delta t between the 1st transducer emitting th
-
Defect MacBook 2011. Problems with the video chip.
I was faced with the legendary defect MacBook 2011. Problems with the video chip. Heard about what Apple makes replacement chips for free. My friend a year ago made the change in the service center. Is this true now?