What are environmental properties for LDAPRealm authentication

Hi All,
I am trying to authenticate a user in LDAPRealm using the weblogic helper
class Authenticate.authenticate(env,subject) method. Can anyone tell what
are environmental properties . for eg url, should we give the weblogic
server url or ldap server url. Can anyone give some example.
Thanks in advance
Suresh

Hi Ganesh,
Thanks for your reply.
I have tried out by changing "property for sorting = cm_modified".
but its not effecting the News Author.
where in News Author the modified one is being displayed first.
But my requirement is that the one which I have created new news should be displayed first not the modified news.
Thanks & Regards,
Jasshu.
Edited by: Jasshu on Jul 19, 2011 12:24 PM

Similar Messages

What are the properties for sorting?

Hi Experts,
In News Autor I want to sort the list by using the latest news at the top.
So I need all the properties for sorting System Administration-> System Configuration -> Content Management ->User
Interface -> Settings ->Collection Renderer Settings -> news display collection renderer -> Property for sorting..
or Is there any solution for displaying the latest news First ?
Thanks in Advance.
Jasshu.

Hi Ganesh,
Thanks for your reply.
I have tried out by changing "property for sorting = cm_modified".
but its not effecting the News Author.
where in News Author the modified one is being displayed first.
But my requirement is that the one which I have created new news should be displayed first not the modified news.
Thanks & Regards,
Jasshu.
Edited by: Jasshu on Jul 19, 2011 12:24 PM

4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
Steve

Hi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

What are the properties of 0Material ?

What are the properties of 0Material. Where to look for information before installing it through bi content.
Why we use it , we could have taken one new infoobject and used it.
Thanks
Edited by: PRASHANT SINGHAL on May 12, 2008 8:48 AM

Hi,
Go to business content and find 0material.There you can see its attributes etc.
Why not a new one?
SAP has provided some standard items and it is a good practice to use those instead of creating your own ,as it saves time and labour
This does not make sense to create something which is already provided
Hope this helps
Manish

What are context properties to use with sun imq ?

Hi
Thank you for reading my post.
what are Context properties that we should use to connect an application to sun IMQ ?
I mean :
INITIAL_CONTEXT_FACTORY
PROVIDER_URL
Thanks

You can purchase music using multiple accounts within the same Windows profile & using the same iTunes library. I think when you log into the store it remembers the last account name used, but provided you don't let it remember your password then you have the opportunity to enter the correct details for each purchase.
If you're going to place these purchases on your respective iPod's the following may help.
*How to use multiple iPods with one computer*
The Apple support document How to use multiple iPods with one computer suggests a number of ways. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iPods using this system, each getting a different selection to suit their tastes and the capacity of their iPod. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for rework order quality inspection

HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?

Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT

I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?

the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.

What are the settings for automatic service PO?

What are the settings for automatic service PO?

Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you!

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What are environmental properties for LDAPRealm authentication

Similar Messages

Maybe you are looking for