What are file extension suppored by the screen painter

hai
i have small doubt at screenpainter.
what are the file extensions supported by screen painter
   thanking
  nagababu

It supports both files in .xml or .srf (at least I have opened both with the Screen Painter).  My guess it supports any extension ... as long as the contents in the file have the right xml code on them.

Similar Messages

  • What video file extensions can be uploaded to the samsung galaxy s lll?

    I've tried uploading different videos to my S lll and none of them are working. Can someone please tell me what video files will play on the device?

    Hello and thank you for your reply. The video format I was trying to upload and play was WMV, MPEG, MOV AND AVI. Any help that you can give me would be greatly appreciated. Thank you in advance.
    Michael
    From: Verizon Wireless Customer Support
    Sent: Friday, January 11, 2013 10:09 AM
    To: <Full name removed for privacy per the Verizon Wireless Terms of Service.>
    Subject: Re: What video file extensions can be uploaded to the samsung galaxy s lll? - Re: What video file extensions can be uploaded to the samsung galaxy s lll?
            Re: What video file extensions can be uploaded to the samsung galaxy s lll?
                created by Verizon Wireless Customer Support in Samsung Galaxy S III - View the full discussion
    Message was edited by: Verizon Moderator

  • Search for qt file??? what are some extension letters?

    i probably inadvertantly deleted my 11 gb file and I've searched spotlight..finder etc.....
    what are other extension letter for quicktime.?
    .mov .qt anything else?

    "Inadvertently deleted"?
    Wouldn't the file then be found in the Trash?
    Use the Finder to search by "Size" should help.

  • MY KEY BOARD IIGHTS ARE ON  BUT NO MATTER WHAT I DO I CAN GET THE SCREEN LIGHT ON

    my key board lights are on., but no matter what i do i cannot get the screen of my mac pro on

    Apple computers: Troubleshooting issues with video on internal or external displays
    Scroll down to Reset the system

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

  • What are options available to cancel the Excise Invoice?

    Hi,
    What are options available to cancel the Excise Invoice?
    Does cancelling the commercial invoice automatically cancels the excise invoice
    if not what are the other options?
    Any settings required to achieve that.
    Usefull answers will be rewarded
    Thanks
    Regards

    Dear Rajiv
    No cancelling commercial invoice will not cancel the excise invoice in background.  For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group.  Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
    thanks
    G. Lakshmipathi

  • Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

    Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac? 
    Thanks to your feedback.

    Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
    (74380)

  • Why do my still pictures blur when they are enlarged or moved across the screen

    Final Cut Express
    Why do my still pictures blur when they are enlarged or moved across the screen?

    If they look ok in pause they should be fine.
    The computer may not be quite keeping up in playback.
    Al

  • What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

    My question today: What are strengths and weaknesses of the
    sap.m.Shell
    and
    sap.m.App
    as container for an application wrapper?
    I currently use non of them, but I see the advantages.
    SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

    We prefer to say, the tender mercies of the Fetch block.
    You'll notice the "wfm info" cluster as an output of the Fetch
    VI.  This cluster has gain and offset members- use these to scale
    your binary data to floating point voltage representation.
    As you point out, the numbers won't be exactly what you expect given
    the vertical range and the device resolution.  There are a few
    reasons for this.  First, we don't use the absolute full scale of
    the ADC for the maximum input voltage.  There are a couple of
    codes of headroom at the top and bottom.  This allows your input
    signal to slightly exceed the specified vertical range without clipping
    (you'll get a warning from the driver).  Second, these gain and
    offset numbers take into account calibration information for your
    device.  Using these numbers will correct for small deviations
    from the ideal offset and gain.
    So if you use the gain and offset numbers from the driver, your
    measurements will be more accurate than if you assume 0 offset and
    perfect gain.  They will be most accurate if you make sure to
    perform a self-calibration once the device is in your system and at the
    temperature that your tests will be run.

  • How to view what are all programs maped with the event....

    I am new to this events concept - could you please say
    in SM64 we can give Event....
    <b>How to view what are all programs maped with the event..</b>
    Thanks in advance.

    Hi Sam,
    See these links:
    How-to trigger a process chain using ABAP?
    Re: scheduling process chain 3 specific times a day
    NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
    Hope this helps.
    concerning to sm64 ..
    Triggering events manually ...
    Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
    example : JOB_OPEN to create a background job..
    When scheduling a background job, you can specify it to start "after event".
    If you do so, you'll have to create an event in SM62.
    If a job is scheduled after event event and you trigger the event with SM64, the job will start.
    Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
    Reward if helpful.
    Regards,
    Harini.S

  • Why are there lines going across the screen?

    Why are there lines going across the screen?

    It may (likely) be a video card issue. There is a "known issue" with certain iMacs made in a certain timeframe (2011-12 I think), and one of the telltale symptoms is vertical lines showing up on your display. Go to Apple's website (https://getsupport.apple.com/) to find out how to get support, then either call their service line (they usually pick right up) or take it into your nearest store's Genius Bar. They'll first check if your iMac's serial number is on the list of vulnerable machines, and then they'll have to do a diagnostic to prove that's the problem -- if your serial number's on the list and it fails the diagnostic, they'll replace the video card for free, even if you're not covered by AppleCare (and if you are, it's free regardless).
    My iMac just had this problem, there were lines sometimes and just weird display issues other times. Eventually it just grayed out altogether and I couldn't use it. So it's likely your display problems will worsen if you don't get it looked at.
    It took them about a week to ship the new video card over, install it, and return the iMac to me.
    Good luck!

  • When opening Powerpoint, the file opens outside of the screen, and I cannot use it, nor can I open a new ppt. How do I rectify this?

    When opening Powerpoint, the file opens outside of the screen, and I cannot use it, nor can I open a new ppt. How do I rectify this?

    Usually the Window menu allows you to adjust window placement in Microsoft Office products.
    If not, connect an external display or projector and change the resolution to the maximum.   
    Save the document with the window residing on the main screen with the Dock.
    That will force it to open on the main screen in the future.

  • Are reader extensions part of the ES4 suite or is it an additional purchase or subscription?

    Are reader extensions part of the ES4 suite or is it an additional purchase or subscription?

    It comes bundled with Standard.
    I believe the limitations (if any) would be defined by your license. I'll let someone more knowledgable speak to that.

  • HT1657 We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?e

    We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?

    The movie is from iTunes.   You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case. 

  • Regarding input output field of the screen painter

    Hi Experts,
    I want to increase the height of the input output field in the screen painter.
    ie, multiline input output field.Is there any means?
    Or is there any alternative other than the input output field?
    Thanks & Regards,
    Soumya.

    hi,
    when u drag n drop some fields in the screen goto to one of the corners of dat fields drag to the extend u want to increase.
    or in attributes section  for u length n width of dat fields are available just increase to your wish.
    if helpful reward some points.
    with regards,
    Suresh Aluri.

Maybe you are looking for