What are impact of Braking one dimension into two

Hi Champs,
I have one Dimension say Product that has two child AC and AP. and these two children has two childs each.
and further these devided into many levels.
this is like
Product
-AC
-CC_A
-CC_B
-AP
-CP_A
-CP_B
A,B are showing some member, but both are repeting AC and AP.
Now I need to create a seperate dimension for A and B and remove from Product.
How this will be done and on what objects of Essbase will be affected. How to do.
Thanks in Advance
Shiv

Breaking a dimension into multiple dimensions has a number of implications. You have to modify dimension build and load rules, caclulation scripts, report scripts and front end tools/templates and source files to use the new structure. IT can be a lot of work.
I could not tell by your example, when you split the dimension in two, will you be able to get the data as an intersection of the two dimensions? If not, it would be hard to split. Can you explain further why the dimension needs to be split into to and perhaps I can make a more informed recomendation.
The paractical answer of exporting the data from Will is correct. You will need to export the existing data (or get it from source again) in a column format and create load rules to be able to reload it. Depending on how the intersections work, it might be an easy or extremely hard task

Similar Messages

What are the appropriate document/stage dimensions in Flash for tablet optimized apps?

What are the appropriate document/stage dimensions in Flash (width x height in pixels) for tablet optimized apps?
(Dec. 2013)
Using Flash and AIR for Android/iOS I would like to develop a educational interactive title optimized for tablet PCs, hopefully both the Android but finally also the iOS platforms. With so many tablets on the market today and with different resolutions (and even aspect ratios) I have difficulty deciding what document/stage size to set for my project/app. I have been experimenting with an Android Google Nexus 7 and Samsung Note 10 tablets and discovered that Android automatically resizes the app's stage to fully fit the screen of the tablet BUT this creates the following two issues for me:
if the stage/document size in Flash is too small and I include bitmaps when the app's stage is enlarged to fit the tablet screen the bitmaps look pixelated.
If I make the stage dimensions too big so that there is no bitmap pixelation because the bitmaps will be shrank instead of enlarged, I am afraid that on some older tablets with slower processors the app may be too slow to run (but I have to say that I did not experiment with very large stage dimensions yet).
Until today I had looked at some of the most commonly used tablets on the market and their resolutions Google Nexus 7, Samsung Note, iPads etc and was inclined towards using a stage size of approximately 1280 x 720 pixels which I considered a medium solution, but now the new generation tablets came out (Nexus 7 gen 2, iPad Mini with Retina, iPad AIR etc) with much higher resolutions so I don't know what size to use now. Anybody has any suggestions?
I would appreciate any ideas and suggestions on this matter.

You explained your problem well enough that looking at the picture won't matter. It looks like you found out too late that one of the first things you should do when you create a Flash file is set the movie properties, which include the dimensions and other things like background color, frame rate, publish settings, etc. While the string that I just listed can pretty much be revised anytime, the dimensions should really be done before anything else, when possible.
One way to go about resizing is to leave the file as is and specify the larger dimensions in the html page code. This could end up reducing the quality of any bitmaps you might have in the file(s) since you would essentially be enlarging them, but any Flash drawn elements will resize cleanly.
If you resize the stage, then you don't have much choice but to resize and relocate everything in it keyframe by keyframe.

What are the SAP Business one requirements for intercompany intergration

Hi. what are the SAP Business one requirements for intercompany intergration

Hi Wendy,
Intercompany 1.1 is supported on SAP Business One 8.82 and Intercompany 2.0 is supported on SAP Business One 9.0.
So depending on Solution version your are looking for, refer to Prerequisites section in the respective version's Administrator Guide.
For further information on Intercompany Integration Solution for SAP Business one, you may refer the following:
https://websmp210.sap-ag.de/partneredge/b1/intercompany
Regards,
Agneesh Jain
SAP Intercompany Team

How to know what are the privs for one custom schema?

how to know what are the privs for one custom schema?
please suggest me......

Hi,
Check this user_sys_privs
Cheers
Pavan Kumar N

ICal splits one event into two, how do I fix this?

I have one weekly repeating event entered. For the first two weeks it shows up like normal, as one event. But two weeks later it splits that one event into two different side-by-side bubbles. I did not alter the event. Does any one else have this problem? How can I fix this?

That is because you are sharing an Apple ID.
On both phones go to:
Settings > Facetime > turn off iPhone Cellular Calls
I would also suggest you check here to make sure your husbands number is not checked on your phone or yours on his:
Settings > Messages > Send & Receive
Settings > Facetime
Otherwise you will get each others Messages and FaceTime calls.
I recommend that you each get your own Apple IDs if for nothing else than iCloud, iMessage & FaceTime.

What are the proper print settings to print two sides, landscape and bind on the short side?

what are the proper print settings to print two sides, landscape and bind on the short side?

This is a question best asked in the appropriate product forum.

Splitting of dimensions into two applications

Dear all,
I've come across an artical in SDN says" The Application could be split into two applications POC_APP5 and POC_APP6 with less number of dimensions to expand. In turn would improve the performance of Input schedule and Reports."
Could you kindly tell me how to split dimensions into two sepatare application?
Based on artical:http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80af7a18-1672-2d10-d2a4-ae0900ed0cff
Regards,

Hi,
As said by Anurodh, the application split is basically when the application has huge data across all dimension members of the application having many dimensions.
for your below question,
Could you kindly tell me how to split dimensions into two separate application?
Consider you have a application with Dimensions,
Account, Time, Entity, Category, JobBand, Product
The above have data of Employees Jobband irrespective of Product
and details of product irrespective of JobBand.
This application can be splitted to two aplications having dimensions as below,
Account, Time, Entity, Category, Product
Account, Time, Entity, Category, JobBand
Hope this helps,
Regards,
G.Vijaya Kumar

Split one IDoc into two IDocs ?

hello all,
I wanna split one IDoc into two IDocs in XI?
how can implement it?
plx give some suggestions.
thx in advance
best regards
Yaning
Message was edited by:
Yaning Liu

Yaning,
Please find the below blog for changing the ocurrences of IDOC
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Best regards,
raj.

Can anyone tell what are the fact tables and dimension tables available in banking domian

what are the fact and dimension tables available in banking domain.
maximum how many fact and dimension tables we can keep in the banking project

Hi Srikanth Korrapati,
Please have a look on this book
The Data Warehouse Toolkit: The Complete Guide to Dimensional Modeling By Ralph Kimball & Margy Ross.
Here is the below link completely about the Banking Case Study from DW Toolkit.
The Data Warehouse Toolkit: The Complete Guide to Dimensional Modeling - Banking Case Study
Hope this will help you out
Regards,
Akhileshkiran.

What are the pre-requisistes before stepping into MI?

Hello All,
Am gonna start learning SAP MI on few days now.
Wanted to know what are the pre-requisistes before learning this technology?
In other words, is it a must to know J2ME & XML very well?
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Ritu,
For MI applications , we have to do application component developments in both ABAP and Java.
In general MI Application = Java Component + ABAP component.
Java component means , which is running on the client device , we are accessing the MI applicatiion throught the Java component .
For running this Java components , we need proper runtimes.
Currently we have JSP Runtime and AWT Runtime .
JSP Runtime supports JSP applications and , AWT Runtime supports AWT applications.
If u have basic knowledge for application developments in JSP and AWT , then no problem with Java component development.(there is no need to know in detail about J2ME and XML).Basic knowledge of XML is necesssary for Client side application development.
Refer these helps for Client Side application development.
What is SAP Mobile Infrastructure?
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/gettingstarted/introduction/what_is_me.html
Client runtime
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/gettingstarted/introduction/what_is_me.html#runtime
SAP NetWeaver Developer Studio and MI Support
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/eclipse/guideeclipse.html
MDK Plug-in Configuration
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/eclipse/eclipsemdkwizardsconfiguration.html
New Mobile Infrastructure Project
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/eclipse/newmeproject.html
Tips and Tricks using the MDK Plug-in
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/eclipse/eclipsetipsandtricks.html
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/appdev/smartsync/app_dev_process.html
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/tutorials/smartsync/definingsyncbo.html
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/eclipse/newsmartsyncproject.html
For MI Applications , as i mentioned earlier one ABAP part is also there.. Knowledge of ABAP , RFC and BAPI is necessary for Back end application developments(for BAPI Wrapper Creaion and Sync Bo Creation).
refer these links for Back end application development
What is a BAPI Wrapper ?
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/appdev/smartsync/what_is_a_bapi_wrapper.html
Developing a simple Smart Sync Application
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/tutorials/smartsync/definingsyncbo.html
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/appdev/smartsync/defining_syncbo.html
http://help.sap.com/saphelp_nw04/helpdata/en/a6/c32a89005ab2449cf95e5b0731ee40/frameset.htm
http://media.sdn.sap.com/public/html/submitted_docs/MI/MDK_2.5/content/appdev/smartsync/bapi_wrapper_types.html
and refer these forums also...
Re: Sample BAPIs for simple two way synchronization
Re: Creating a sample Mobile Sales Application
How to develop a mobile application using netweaver developer studio
Regards
Kishor Gopinathan

What are the options if one iPad was stolen last week and Apple created a bug which the burglar can turn off "Find My Phone"?

Last week, my gf was stolen and lost her iPad. I thought that everything was lost because "Find My Phone" didn't manage to track the iPad location so the police could do something.
Today, I ended up reading this article (http://9to5mac.com/2014/04/03/ios-7-bug-allows-anyone-to-disable-find-my-iphone- and-bypass-activation-lock-without-a-password/) which tells me that the iOS 7.1 presents a bug where someone can deactivate the "Find My Phone" function without the password.
What are the options here so I can rehave the stolen iPad, which Apple helped the burglar to keep it or even sell it?
Appreciate your cooperation

Apple didn't "help the burgler" do anything. Did she have a passcode on the device? If so, the thief would not have been able to access any of the functions needed to disable Find My Phone. Also, if the device doesn't show up in iCloud's Find My Phone, it may be that it is simply turned off, or not connected to a network.

One dimension and two fact report in OBIEE

Dear All,
I have one dimension "region" and two facts (Sales value & Gross margin%). Gross margin% is logical column which has been derived from two other facts column and it's value is in range from Zero to 100.
Now, I want to generate below report. For each gross margin% range of 5%, I want to sum the sales value for each region. Please assist (Just a small snapshot of report)
GM%     Region_1     Region_2
<0     254      619
0-0.05     524      799
Thanks & Regards,
[email protected]

Hi,
Create Bins for Gross% fact column and go to pivot view place Gross% fact column into rows area,region column into columns section and sales value into measures section
hope it works

I want to SPLIT A CLIP. That's all. Make one piece into two.

I am looking for the equivalent of the 'Command-T' function in iMovie HD. This is one of the most commonly used actions in processing video, and apparently it doesn't exist. The 'Split Clip' command in iMovie 09 simply does not work for me. At all. EVER. I have yet to find an instance where it isn't grayed out. All I want to do is split a clip, and add a transition between the two.
While I'm on my soap box, the revisions of iMovie since V.6 are without a doubt the most counter-intuitive, joy-sucking applications ever produced by Apple. iMovie made it FUN to edit video; these last two versions make it frustrating and cumbersome.
To reiterate, I want to SPLIT A CLIP INTO TWO PIECES. If anyone here can provide instructions for doing so (as opposed to explaining why it is NOT possible), then kindly do so. Thank you.

Trey, I seriously feel your pain. I'm editing a wedding project in IM '09 and it is literally taking me twice as long to complete the project than it would have in HD. You should be able to make splits in the event browsers, but that's too much like common sense for Apple. They completely mucked up the editing process by doing away with iMovie HD, which by the way is not working well in Snow Leopard.
As for split, I suggest the same thing as above. Put the playhead where you want the split. Us shortcut key, ShiftCommandS. I had problems with it this morning, but it finally kicked in.
I also had a problem when trying delete a selection of a clip. When I clicked delete, it deleted the selection plus the extracted audio of the entire clip from which I took the selection. Not sure what caused that.
I have FCE installed, so maybe I’ll haul it out and try using it for my next project. IM '09 is a pain. I'm not even sure how it's more accessible to general users.

Splitting one message into two files

Hi all,
I have a case where I have to generate two files for a single incoming message.The scenario is as follows-
I have the following structure as target -
- Structure 1 with some fields in it
- Structure 2 with some fields in it
I have done the mapping of the target with the source.
Now what I require is a separate file for structure 1 and another file for structure 2
Thanks,
Sandeep

You need to use BPM for this.
First create a message mapping with one source and two targets.
To add more message types to a mess map, go to the Messages tab (there are 3 tabs: Design, Test, Messages ).
Then you need one transformation and two send steps in the BPM.
regards
SKM

How to divide one catalog into two?

I have a question that I can not find an answer to and hope I can get the help here.
Lightroom 5.
I have one catalog now and would like two. The reason is I have two things that I shoot. I do studio work for my clients and also do landscape photography for myself and for sale. I would like to keep the two catalogs seperated. One reason for this is when I use the star system to organize my photos then do a search for say 3 stars it brings up my portrait work and landscape work. I have all my files organized on my hard drive and simply want them to stay where they are but would like 2 seperate catalogs to reference. I can not figure out how to do this. Is anyone out there able to explain this to me? Thanks

davidKheaton wrote:
So if I understand correctly, if I make a collection of all my portrait work then export as new catalog it will create the new catalog and keep all the keywords, collections etc and leave the files where they are? Then if I do the same thing to all the landscape images then just delete the original catalog it is all good?
Well, there are a few assumptions that only you can verify. The major assumption is that all of your photos is in either one or the other category, that there aren't any photos in a 3rd category, and that you can segregate the photos properly. Then all is good ... except ... in my opinion, you are now doing unnecessary work to avoid the benefits of Lightroom
So if I understand correctly, if I make a collection of all my portrait work ...
I still recommend you stop right there, make a collection for landscape, make a collection for portrait, and not bother with splitting the catalog; your collections give you a virtual split, which is just as effective as actually splitting the catalog, but its less work, and it eliminates the possibility that you accidentally import a photo into the wrong one of your two future catalogs.

What are impact of Braking one dimension into two

Similar Messages

Maybe you are looking for