What are look up's in xi.

can any body tell me what is Lookup in xi . what is its use.

hi,
you can use mapping lookups to check some values
in other systems :
RFC lookup - to check values in R3
DB lookups to check in DBs
SOAP to check via SOAP
so in mapping you have for example material number 33333
but in sap it's 55555 so you check in your mapping (via lookup)
that 3333 is 5555 and put 5555 to your target message
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

When you open a new browser tab, underneath the box to type in what you are looking for is the recently visited list. I want to disable or delete this list...how do I get rid of this list???

When you open a new browser tab, underneath the box to type in what you are looking for is the recently visited list. I want to disable or delete this list...how do I get rid of this list???

The drop-down list displays items from your History and/or Bookmarks.
You can control what shows (or nothing at all): Options > Privacy, "Location Bar" section. Options are:
*History and Bookmarks
*History
*Bookmarks
*Nothing
See --> https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Looking for a drum loop app that will run in the background. What are you using?

Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

What are the functions of look and feel files?

Hi,
If some one can explain me what are individual role in look and feel of the ISA B2C application.
mainFS.jsp
main_inner.jsp
catalogFS.jsp
accountFS.jsp
refresherB2C.jsp
I want to know function of each files. If I change any file then where exactly I can see changes which I made.
Any help from any one highly appreciated.
Thanks.
Ashish

Hi,
If you get hold of the ISA Development and Extension guide there is a section highlighting which frames go where in the main application.
You can also see which .jsp pages are displayed where by adding the following parameter to the root URL of the application when you logon.
http://<host>:<port>/b2c/b2c/init.do?showmodulename=true
This will display the name of each jsp page in the frames on screen.
Also, surely you must have been asked to change certain aspects of the application - not specific files? You shouldn't just change the files and then "see what happens"...
Hope this helps,
Gareth.

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

The NEW macbook Pro and Air are EXTREMELY close in form factor
The newest macbook Pro is essentially a larger macbook Air with Retina display and options for speed in increasing prices up to an independent graphics and quad core processor.
both Air and new Pro now have PCIe SSD and permanent RAM.
The Air is the lightweight portable form factor, fast to boot and shut down, but with longer battery life than any of the macbook pro in 13"
Now the new macbook Pro and macbook Air are extremely close in form factor and nature.
both have 802ac wifi
both have permanent RAM, no superdrive
both are slim profiles and SSD
The only real differences now are (in the most expensive Pros) faster processors and quadcore processors and top end model autonomous graphics.
....and of course the retina display
both are now "very good for travel"
Other than features the form factor of the Air and Pro are VERY close now,....so now its merely a matter of features and price more than anything.
You need an external HD regardless of what you get for backups etc. Drop into an Apple store and handle both and make your choice based on features, such as Retina or non-retina, .... both at a distance now look like the same computer.
The Pro weighs more, ....but nowhere near what it used to just a month ago on the older macbook Pros
The NEW macbook Pro is a different creature entirely than the older macbook Pro, .....the new Pro is thicker than the Air, but id frankly call the NEWEST Pro a "macbook Air with Retina display" , or
Maybe a “macbook Air PRO with Retina display”
Instead of Air VS Pro now,.....its really a smooth transition from Air to pro without comparing say, 2 different creatures, now its like contrasting a horse from a race horse.
Either one in 8gig of RAM (preferably)... the 4gig upgrade costs very little, the I7 you will notice only 15% faster on heavy applications over the I5, and NOTHING on most APPS.....I5 has longer battery life.
As you see below, the non-Retina 13" AIR is 82% of the Macbook with Retina display in resolution
there is no magical number of pixels per inch that automatically equates to Retina quality.
http://www.cultofmac.com/168509/why-you-might-be-disappointed-by-the-resolution- of-those-new-retina-display-macs-feature/
A huge internal SSD isnt a game changer for anything, you need an external HD anyway
what you WONT READ on Apple.com etc. is that the larger SSD are MUCH FASTER due to SSD density
"The 512GB Samsung SSD found in our 13-inch model offers roughly a 400MB/s increase in write speeds over the 128GB SanDisk/Marvell SSD"
http://blog.macsales.com/19008-performance-testing-not-all-2013-macbook-air-ssds -are-the-same
Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
http://www.youtube.com/watch?v=oDqJ-on03z4
http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
I5 vs. I7 performance 13” Macbook Air 2013
Boot performance
11.7 I5 ……11.4 I7
Cinebench
1.1 I5….1.41 I7
IMovie Import and Opt.
6.69 I5….5.35 I7
IMovie Export
10.33 I5…8.20 I7
Final Cut Pro X
21.47 I5…17.71 I7
Adobe Lightroom 3 Export
25.8 I5….31.8 I7
Adobe Photoshop CS5 Performance
27.3 I5…22.6 I7
Reviews of the newest Retina 2013 Macbook Pro
13”
Digital Trends (13") - http://www.digitaltrends.com/laptop-...h-2013-review/
LaptopMag (13") - http://www.laptopmag.com/reviews/lap...play-2013.aspx
Engadget (13") - http://www.engadget.com/2013/10/29/m...-13-inch-2013/
The Verge (13") - http://www.theverge.com/2013/10/30/5...ay-review-2013
CNet (13") - http://www.cnet.com/laptops/apple-ma...-35831098.html
15”
The Verge (15") - http://www.theverge.com/2013/10/24/5...w-15-inch-2013
LaptopMag (15") - http://www.laptopmag.com/reviews/lap...inch-2013.aspx
TechCrunch (15") - http://techcrunch.com/2013/10/25/lat...ok-pro-review/
CNet (15") - http://www.cnet.com/apple-macbook-pro-with-retina-2013/
PC Mag (15") - http://www.pcmag.com/article2/0,2817,2426359,00.asp
Arstechnica (15") - http://arstechnica.com/apple/2013/10...-pro-reviewed/
Slashgear (15") - http://www.slashgear.com/macbook-pro...2013-26303163/

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

What are "other" files when I look at storage

What are "other" files when I look at storeage capacity? I have a HUGE amount of other and I am not sure what it could be.

Please look at the "More like This" threads noted to your right.

We are looking to replace our LaserJet 8150dn printer. What model replaced the 8100 series? - Thanks

We are looking to replace our LaserJet 8150dn printer. What model replaced the 8100 series? - Thanks

Hi Allan...
Will try to keep this short. Tried to respond yesterday...but message kept coming back as undeliverable.
I am in SW Louisiana.
Did some checking. Back in Sept of 2006, my screen went black and was experiencing some "popping sounds" prior to it going black. Took it to Baton Rouge (about a 2 hour drive) to CompUSA. They kept it a month and "repaired" it. If I do some serious looking in boxes of old receipt files, I may be able to find the receipt. (Kept receipts because we got flooded out by Katrina in the New Orleans area and was living with mother-in-law during repairs.)
Currently I have the same little problem described earlier to you...collapse to center and black screen for about 15 minutes. Once or twice daily. It has been consistant since first happening back in August...and usually daily when on the computer.
My computer is in the G84201xxxxx range and an eMac USB 2.0.
Saw the message to look at the ones on eBay. Saw a used computer lab one for about $150. May decide to buy it. (Am leery because I bought one some years ago that turned out to be stolen -- I had to give it up when a tech working on the screen saw the serial number from a list of stolen computers from a college computer lab.)
Basically, in your opinion, this problem that I am having will or will not get worse? Capicator problem or cable problem?
Am wondering if the fix done in '06 actually replaced the cable? and WHY I was not told of the recall problem at the time. I know that I had to pay well over $100 for the fix, whatever it was.
Anyway, I will call the 1-800 number this week but expect little or no assistance from them.
When experiencing the problem initially back in 2006, I called Apple tech support and they could do nothing for me and my problem? My extended warranty had run out and was no longer renewable. Strange, if there was a recall fix out there for the problem that I was having, nothing was told to me.
Anyway, thanks for your input!
Joe

I'm looking to supercharge my G4. What are my options?

Hi, I'm the proud owner of a Power Mac G4 FW800, the dual 1.42GHz one. I just had the power supply repaired, and it runs wonderfully, other than it's starting to show its age. I'd like to know what I can do to maximize performance.
Here are my slight problems:
- Slower than desired file transfers
- Extremely slow video rendering
- iWork '09 complains about Core Image not being supported
- Minecraft 1.5.2 not exactly playable (~4 FPS, at least 15 FPS desired)
I also have the full CS4 Design Premium suite, and I'd like to get better performance out of that.
My budget is around $200, what are my options? Thanks!

Here is a picture of my MDD with the ATA133 RAID0 PCI card and a SATA PCI card. For a high performance striped RAID, you want each drive on it's own cable, hardware RAIDs will only stripe together a pair of Masters and/or a pair of Slaves. The ATA133 RAID0 card is probably the fastest performance you can get in the MDD with compatibility going back to OS 9. Not sure if there exists a similar hardware RAID SATA card for MDDs. But even a single SATA PCI drive does pretty fast as well. The on-board built-in ATA66 and ATA100 IDE interfaces in the MDD are much slower than these PCI card options.
See how the pATA ribbon cables have to route over the video card and heat sink, very cluttered. The SATA cable is much easier to work with. Here I have two drives in the front bay and just one in the rear bay. There are two cooling fans stuck to the heat sink to blow into the fins, these nest within the drive bracket in the rear bay when closed.
I am planning to migrate my data to the SATA drive and put another one in the front bay, and remove the striped RAID PCI card and drives, leaving the rear bay empty.

What are default group permissions supposed to look like?

I'm struggling with permissions under Leopard (I understand many others are as well). My quick and dirty question is: what are the default user & group ID numbers for a fresh leopard client install?
I've only done archive & installs lately so no longer have a test bed to compare from. Currently on one machine user id and group id (GID) are BOTH 501. I think Leopard has moved the default user IDs to 1000 (on up) and the default group ID to 20 (staff).
When moving files between machines at one installation the group is coming across as "Unknown" from a Leopard server. Trying to Get Info on these files and unlocking the padlock in Get Info window will crash the Finder!! So I guess i'd like to change the group IDs so they're consistent on all machines. Didn't have this problem with Tiger.
Thanks for any help!
-MD

OK, so followed the instructions in <http://docs.info.apple.com/article.html?artnum=307128> and things were fine until i updated to 10.5.2. Now if I choose Get Info on a file in any external drive there is no longer a padlock under Sharing & Permissions. It only says "You can read and write" and that's it. No list of owner (Me), groups, everyone. they're not even listed anymore and the padlock is GONE!
ls -l in Terminal gets me lists like
drwxr-xr-x 6 steve _steve 204 Dec 8 2004 Hüsker Dü
and ls -ln returns:
drwxr-xr-x 6 501 501 204 Dec 8 2004 Hüsker Dü
i don't think i like the 501 501 thing. i'd prefer 501 20 .
anything i should be aware of before changing the group across the board to 20? (i'd also like to change the user folder from 501 501 to 501 20). should i use the dscl command, i used to try to get out of this mess before, somehow?
Permissions under 10.5 has sadly become a real mess! reminds me of 10.0 days...

Looking for a canon with the same features as SD1100IS. What are the next 3 models after SD1100?

Husband's canon SD1100 was stolen. We're trying to replace it with another but 1100s are not available. What are the next 3 or so models past the SD1100 that would have the comparable features, speed and ease of operation?

Hi A-Mo,
I'm very sorry that your husband's PowerShot SD1100 IS was stolen!
The SD camera line has been replaced by the PowerShot ELPH lineup. These cameras are improved in a number of important ways, such as better zoom lenses, and sensitivity to light for existing light photography.
I recommend that you consider the PowerShot ELPH 310 HS. This camera has an 8x optical zoom lens (vs. 3x for the PowerShot SD1100 IS), has a higher ISO of 3200 (vs. 1600) for low light photography and shoots video in "full" high definition (1920 x 1080 resolution) (vs. 640 x 480).
Please note: none of the cameras in this group of cameras includes the optical viewfinder you had on the PowerShot SD1100 IS,
I hope this is helpful.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What are the pro alternatives to Compressor?

I've been compressing a lot of material recently, mostly shot on DVCPRO HD and edited on FCP. What's been happening is that some - but surprisingly not all dissolves - are breaking up into pixels or rather blocks of pixels. The problem, as I've recently found out, has been documented here so I won't waste anyone's time agonizing over it. I'll just say that using Compression Master, Sorenson Squeeze and bitVice produced artifacts free files right off the bat.
What's infuriating about the Compressor is that every time I try to test a short piece from the middle of the sequence, it compresses fine but then when the whole 20 min sequence is compressed the problem comes back.
I've tried CBR, closed GOP, IP structure etc as suggested in one of the posts and it did get rid of the pixelation but I'm still not happy with the results. The picture looks a bit soft and washed out. Shockingly comparable to a well compressed random, internet downloaded DivX file that I can play on the same player. Is it the Compressor, DVDSP or the true nature of the DVCPRO HD format showing its ugly face?
What are the professional MPEG encoders that could save me all that headache? I'd rather pay good money and finally get it done right than spend my time beta testing software that is clearly not ready for the prime time.

Never had problems whit Apple Mail. Till I updated to Maverick.
First problam was Gmail after updating to Mavericks, Apple mail went to download all my old mail's over 6800. Just delleted my Gmail account form the list to stop it.
Second issuu memory.
First dit not now what was te problem till I found out that Apple Maill took over al my memory. Try differened tip and trick of the Apple Forums. This one works the best. Other users had the same problem after Mavericks.
I restore my Accounts.plist form before the Maverick update.
Looked whit TextWrangler but what am i lookong for? Do not know how is supposed to look.
Size of Accounts.plist on 11/18 1.7MB
Size of Accounts.plist on 23/18 3.0MB
Hoping for the best ....

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

What are the Mandatory Fields in Transaction ME51

Hello Seniors,
I have a requirement about purchase order creation. In this process, I am using the BAPI named " BAPI_PO_CREATE1 ". I have passed all the fields but when I debug and look into the internal tables, I couldn't find certain records. I even debugged " bapiret2" and I see an error which reads "" All mandatory fields are missing"". I have even created a PO in ME51 and found out the mandatory fields but in vain. BAPIRET2 still says, there are some more mandatory fields missing. I need to know what are all the mandatory fields to create a Purchase order using TCODE - ME51.
Your reply is most awaited and rewarded.
Thanks and Regards,
MARKIV

hi ,
Functionality
Function module BAPI_PO_CREATE1 enables you to create purchase orders. The BAPI uses the technology behind the Enjoy purchase order transaction ( ME21N).
Alternatively, the IDoc type PORDCR1 is available. The data from this IDoc automatically populates the interface parameters of the function module BAPI_PO_CREATE1.
Functionality in Detail
Authorization
The following authorization objects are checked when an Enjoy purchase order is created (activity 01):
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
Controlling adoption of field values via X bar
For most tables, you can determine via your own parameters in the associated X bar in each case (e.g. PoItemX) whether fields are to be set initial, values inserted via the interface, or default values adopted (e.g. from Customizing or master records) (for example, it is not mandatory to adopt the material group from an underlying purchase requisition - you can change it with the BAPI).
Transfer
Header data
The header data of the Enjoy purchase order is transferred in the table PoHeader.
Item data
The item data of the Enjoy purchase order is stored in the table PoItem (general item data). The delivery schedule lines are stored in the table PoSchedule.
Use the table PoAccount to specify the account assignment information. If account assignments have been specified for services and limits, you show the relevant account assignment line in PoAccount in the table PoSrvAccessValues via the package number of the service or the limit.
Services and limits
Services, free limits and limits with contract reference can be specified in the tables PoServices, PoLimits, and PoContractLimits.
Conditions
Conditions are transferred in the table PoCond; header conditions in the table PoCondHeader. Price determination is reinitiated via the parameter CALCTYPE in the table PoItem.
Vendor and delivery address
The vendor's address can be specified individually in the table PoAddrVendor; the delivery address in the table PoAddrDelivery. If you do not make any individual specification, the fields will be populated via the central address managementfacility.
Note
In this method, the following restrictions apply with regard to addresses:
Addresses can only be created with this method - they cannot be changed. You can only change address data with the method BAPI_ADDRESSORG_CHANGE.
When you create addresses, they are not checked by the method. An Enjoy purchase order may therefore contain faulty address data.
Partner roles
The partners can be maintained individually via the table PoPartner (with the exception of the partner role "vendor").
Import/export data
Import/Export data can be specified per item in the table PoExpImpItem. Foreign trade data can only be transferred as default data for new items.
Texts
Header and item texts can be transferred in the tables PoTextHeader and PoTextItem. Texts for services are imported in the table PoServicesText.
Version Management
You can make use of the Version Management facility via the table AllVersions.
Return
The PO number is returned in the parameter ExpPurchaseOrder. In addition, all information except the service and export/import tables is placed in the output structures.
Return messages
Messages are returned in the parameter Return. This also contains information as to whether interface data has been wrongly or probably wrongly (heuristical interface check) populated. If a PO has been successfully created, the PO number is also placed in the return table with the appropriate message.
Example
Example of population of BAPI interface in the Function Builder
Parameter: POHEADER
COMP_CODE = 1000
DOC_TYPE = NB
ITEM_INTVL = 00001
VENDOR = 0000001000
PMNTTRMS = 0001
PURCH_ORG = 1000
PUR_GROUP = 001
CURRENCY = EUR
Parameter: POHEADERX
COMP_CODE = X
DOC_TYPE = X
ITEM_INTVL = X
VENDOR = X
PMNTTRMS = X
PURCH_ORG = X
PUR_GROUP = X
Parameter: POITEM
PO_ITEM = 00001
MATERIAL = 100-100
PLANT = 1000
STGE_LOC = 0001
QUANTITY = 15.000
TAX_CODE = V0
ITEM_CAT = 0
ACCTASSCAT = K
Parameter: POITEMX
PO_ITEM = 00001
MATERIAL = X
PLANT = X
STGE_LOC = X
QUANTITY = X
TAX_CODE = X
ITEM_CAT = X
ACCTASSCAT = X
Parameter: POSCHEDULE
PO_ITEM = 00001
SCHED_LINE = 0001
DELIVERY_DATE = 02.12.2002
QUANTITY = 6.000
PO_ITEM = 00001
SCHED_LINE = 0002
DELIVERY_DATE = 03.12.2002
QUANTITY = 5.000
PO_ITEM = 00001
SCHED_LINE = 0003
DELIVERY_DATE = 04.12.2002
QUANTITY = 4.000
Parameter: POSCHEDULEX
PO_ITEM = 00001
SCHED_LINE = 0001
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0002
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0003
PO_ITEMX = X
SCHED_LINEX = X
DELIVERY_DATE = X
QUANTITY = X
Parameter: POACCOUNT
PO_ITEM = 00001
SERIAL_NO = 01
QUANTITY = 15.000
GL_ACCOUNT = 0000400000
COSTCENTER = 0000001000
CO_AREA = 1000
Parameter: POACCOUNTX
PO_ITEM = 00001
SERIAL_NO = 01
QUANTITY = X
GL_ACCOUNT = X
COSTCENTER = X
CO_AREA = X
Parameter: POCOND
ITM_NUMBER = 000001
COND_ST_NO = 001
COND_TYPE = PB00
COND_VALUE = 79.900000000
CURRENCY = EUR
CURRENCY_ISO = EUR
COND_UNIT = KG
COND_P_UNT = 1
CHANGE_ID = U
Parameter: POCONDX
ITM_NUMBER = 000001
COND_ST_NO = 000
ITM_NUMBERX = X
COND_TYPE = X
COND_VALUE = X
CURRENCY = X
CHANGE_ID = X
Parameter: POPARTNER
PARTNERDESC = OA
LANGU = EN
BUSPARTNO = 0000001100
PARTNERDESC = GS
LANGU = EN
BUSPARTNO = 0000001200
PARTNERDESC = PI
LANGU = EN
BUSPARTNO = 0000001000
Help in the Case of Problems
1. Note 197958 lists answers to frequently asked questions (FAQs). (Note 499626 contains answers to FAQs relating to External Services Management.)
2. If you have detected an error in the function of a BAPI, kindly create a reproducible example in the test data directory in the Function Builder (transaction code SE37). Note 375886 tells you how to do this.
3. If the problem persists, please create a Customer Problem Message for the componente MM-PUR-PO-BAPI, and document the reproducible example where necessary.
Customer Enhancements
The following user exits (function modules) are available for the BAPI BAPI_PO_CREATE1:
EXIT_SAPL2012_001 (at start of BAPI)
EXIT_SAPL2012_003 (at end of BAPI)
The following user exits (function modules) are available for the BAPI BAPI BAPI_PO_CHANGE:
EXIT_SAPL2012_002 (at start of BAPI)
EXIT_SAPL2012_004 (at end of BAPI)
These exits belong to the enhancement SAPL2012 (see also transaction codes SMOD and CMOD).
There is also the option of populating customer-specific fields for header, item, or account assignment data via the parameter EXTENSIONIN.
Further information
1. Note 197958 contains up-to-date information on the purchase order BAPIs.
2. If you test the BAPIs BAPI_PO_CREATE1 or BAPI_PO_CHANGE in the Function Builder (transaction code SE37), no database updates will be carried out. If you need this function, please take a look at Note 420646.
3. The BAPI BAPI_PO_GETDETAIL serves to read the details of a purchase order. The BAPI cannot read all details (e.g. conditions). However, you can use the BAPI BAPI_PO_CHANGE for this purpose if only the document number is populated and the initiator has change authorizations for purchase orders.
4. Frequently used BAPIs for purchase orders are BAPI_PO_CREATE, BAPI_PO_CREATE1, BAPI_PO_CHANGE, BAPI_PO_GETDETAIL, BAPI_PO_GETITEMS, BAPI_PO_GETITEMSREL, and BAPI_PO_GETRELINFO.
5. For more information on purchase orders, refer to the SAP library (under MM Purchasing -> Purchase Orders) or the Help for the Enjoy Purchase Order, or choose the path Tools -> ABAP Workbench -> Overview -> BAPI Explorer from the SAP menu.
regards
reena

My goals; what are my needs?

Hello folks,
I currently have a MacPro and in many ways I regret the decision. I am a grad student but also I composer/musician. I have Logic Pro and I mainly use it to sketch out ideas for new works. I only use it to create demos and never mastered CDs. I know it is overkill, but I realize that now.
I am interested in some portability now as some of the people I work with live elsewhere and I want to bring my computer/interface/mics/etc to them and have them play on their particular instrument/vocal work for my compositions. I want to continue working with Logic Pro since that is what I'm used to now. What is the minimum laptop I can use to do some recording, location recording and some overdubbing? I use an Apogee Duet and I will never record more than two audio tracks at once.
Can I get away with an older model iBook or something? What are the requirements that will make it pretty trouble free? I'm willing to use a simpler program (garageband?) to find something portable.
I almost bought a Zoom or Edirol to fulfil this task, but I can't stand the small screens.
Any advice will be appreciated...
thanks

Thank you all for your input. It was helpful.
It is mainly for recording 1 or 2 simultaneous tracks of my collaborators improvisations, or my collaborators playing my compositional ideas. They would this on top of 1 to 4 other tracks.
I don't believe any (or many) plug-ins will be used as the aim is to "hear" compositional ideas I have in my head or on paper to see if a certain idea has potential. My main goals is to put together sketches, tracks to create the workings of a new piece. I'm not looking at making finished recordings, as I always plan to do that at a professional studio with an engineer that has more experience than I do. All the assembly of tracks/sketches/ideas will take place at home on my MacPro. I just need something to record my other instrumentalists at my collaborators' homes--thus the portability needed.
I used to use a Zoom H4 to record improvisational sessions of my small ensemble. But what I found was that the small screen is really inconvenient to use to overdub new tracks.
Thank you jdredge for your experience with your Powerbook. This is input I'm looking for. Real world experience with LP7 and older (cheaper) portables. I have an Apogee Duet as my interface. In all, I don't think I would I would have more than 5 tracks, probably 3 acoustic and one or two VI. Even then, my collaborators will probably be recording on top of 3 or 4 other tracks at most.
I've started looking at places that sell older portables. I've spent so much on this MacPro and other goodies that I can't afford the newest laptops (although it is so tempting to go into further debt).
Thanks in advance for any further guidance.

What are look up's in xi.

Similar Messages

Maybe you are looking for