What are my odds??
Next week I would like to apply for the Amex ED.
Back story...I applied for Amex Bce in April and was denied. Stats at the time 645 ex 30% util. Reason for denial was fico score.
Judgement (unpaid 2009)
Loan amount to high (only took the loan out November)
Util was too high compared to limits
Aaoa
I have now brought my ex score up to 708 and util 10%.
Unfortunately the judgement is on until March.
I am pre qual for venture, venture 1, QS, and Prestige.
I'm gonna apply for the venture next week, but I also would like the Amex ED.
What do you think my chances are at being approved for the ED card?
I was approved for the ED with two 7 year old collections showing and 5 late pays... but I will tell you that I wish I would have waited until the collections fell off (they were removed shortly after I applied). They started me with a $1k limit, denied my first request for a CLI, and the only reason they approved my 2nd CLI request was because by then the collections were gone. You can try now if you want, but you might get stuck with a very low limit until the judgment is gone.
Similar Messages
-
I'm usually good at backing up my photos and documents, but the last 2 months of pictures and videos are on there and not backed up anywhere. I'm heartbroken.
"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner. -
WHAT ARE THE ODDS FOR BLACKJACK?!
WHERE DID MY POST GO?
I would still appreciate some assistance if anyone knows the noraml house odds in the game of blackjack, so far we have;
The house takes in the vent of a tie
blackjack pays 2:1
insurance pays even ...
Can someone please confirm or dispute this?Confirmed.
All bets are even bets unless there are house rules in effect, for example, some variations offer higher reward for unusual hands. If you bet a dollar and beat the dealer, you win a dollar plus your original dollar back. If you loose, the dealer takes your dollar.
If you play against the dealer (only) and you draw an ace and a face card on the first deal, the dealer typically pays you 1.5 times the amount of the bet. However if you are playing against other players as opposed to "cooperating with" other players, then there is no bonus for getting the ace and a face card on the first deal.
Some casinos do not use the 1.5 rule. Other casinos do something different, such as allowing you to make side bets.
Insurance is a side bet of up to 1.5 times the original bet and it is offered when the dealer's upcard is an ace. This bet pays 2:1 if the dealer has a natural 21. If you bet one dollar and the dealer displays an ace, you can bet an additional 50 cents, and if he has blackjack, you only loose 50 cents instead of the full dollar you originally bet. If he doesn't have blackjack, then you loose the 50 cents. You might still win the dollar back though depending on your hand and his hand.
In the event of ties, your bet stays on the table and is in effect for the next hand. (Some casinos will allow you to take back the bet or otherwise change it.) -
...of being struck by lightening twice. (a vent)
Okay, I sent in my MBP for repair twelve days back. Five days later I called DHL up early evening and asked about its whereabouts; they said it had already been delivered. Get this, DHL delivered it to the wrong address, leaving it on someone else's front doorstep, unsigned for. They say they can come back the next morning to retrieve it and deliver it to me. "No way," I said, "go out and find it tonight and deliver it tonight. Don't let it sit on someone's front doorstep overnight, please." Of course, I was pretty insistent, i.e. hopping mad. They did, with profound apologies, blah, blah. No explanation how it was at the wrong address, no explanation why it was not signed for, despite the "signature required" by the label.
Okay, fast forward four days, during which time the logic board has gone kaput (one of the things replaced in above said repair). After several 30-45 minute waits--Apple, I hope you're seriously thinking of hiring more tech support agents!--I speak with a technician who, after another 45 minutes determines I need to be bumped to a higher authority. At this point we all agree that it's a hardware issue, most likely the logic board. Okay, so this is Sunday evening. We try to schedule a pick-up (DHL) for the next day, their lines are busy, so my TECH (the senior techs deserve to be capitalized, as far as I'm concerned) offers to keep trying, staying on the line. I offered to call them myself to schedule the pick-up. He gives me Apple's DHL account number, I get through, schedule the pick-up, get a tracking number. Fine. The next day it's picked up. Now keep in mind, I have no label, however, I'm told that with the tracking number written on the box, the label will be applied as soon as the box arrives to the DHL center after pick-up. Fine, I also write my return address and the words "Apple Computer" in bold face.
Up to an hour ago, I was expecting to see it back today, Wednesday. I check the DHL tracking info online (borrowed computer) and , omigawd, the tracking number indicates a 2 day delivery to DELL REPAIR in Memphis, TN. Right now, it's on the delivery truck headed out for the day's runs, including DELL.
I've started a formal complaint (whatever that means) with DHL, and asked them to, obviously, stop the shipment and redirect it to Houston, APPLE.
Now, you could say that I have every right to believe that DHL has gone to the crapper, but I have to wonder if this wasn't just lightening striking the same person twice. UGH!
Thanks for letting me vent a bit. Interested in hearing if others have had similar experiences with DHL recently.Lighting chooses to strike us all multiple times, but in different ways. While I've never had a DHL problem, Apple themselves have repeatedly sent me brand new DOA products. My first MBP was a 15" that came with a DOA CD Drive. I decided that instead of replacing, I would upgrade to the new 17" That brand new unit came with a DOA keyboard. After receiving a replacement on that, the logic board went. So far everything seems to be working, but I got the AppleCare just to be safe.
-
What are the odd lines on the header bar of Firefox for Mac 10.6.8?
Occasionally, FF gets these odd, jagged lines in the header bar. Hard to explain: https://skitch.com/dancapistan/gtu4g/firefox-lines
The lines seem to be different in shape and color each time.
When I restart FF, the lines go away for a time.I have Firefox 9.0.1 and Mac OS X Snow Leopard 10.6.8. I have also had the problem of errors in the Firefox graphic user interface (GUI) that appear as jagged lines and pixels over the title bar, back and forward buttons, over words in the address bar and in the Google search box, and over tabs. If I continue to use Firefox when this happens, Firefox and the Mac OS will freeze within a minute or two. I then have to shut down the computer and restart, as I can not Force Quit Firefox from the Firefox dock icon or from the Apple menu icon at the left of the Mac OS menu bar, which is at the top of the screen. I have not tried the Command + Option + Escape keyboard combination yet to see if this will bring up the Force Quit window.
I have used Firefox for years and never had problems like this before. Firefox 3.6 on Mac OS X Tiger 10.4.11 was stable. I recently upgraded to Snow Leopard 10.6.8 and Firefox 8, which had the same problems as Firefox 9. To make sure that the problem was not an OS upgrade issue, I erased and formatted my hard drive and did a clean install of Snow Leopard, but Firefox 9 is still apparently unstable. I have not noticed similar problems with iTunes, iPhoto, iMovie, Pages or Safari, but I do not use these applications as heavily. For a short while, I tried Firefox 3.6 on Snow Leopard, and it seemed to be stable, without the problems of Firefox 8 & 9. If I continue to have problems with Firefox 9, I plan to go back to Firefox 3.6 for a longer period to see if it remains stable. -
Im stumped again, what are the odds? #@%
when it rains it pours. just noticed after fixing the mute issue, another issue that i had before and was unable to solve. this one is when i hit the space bar to play, my lil vertical red line indicator skips back a bit left before progressing right. last time i had just 3 tracks done so i made a new song recreated the tracks then copy and pasted one track of info at a time between opening and closing the 2 files but i got lots of tracks and have added effects etc. already. i know its a shot in the dark but maybe i can learn what ive done to whack my song. thanks for everything.
seasons greetings all!thanks for the reply,
if i have the guide reset to the beginning of song and push space bar it hesitates before progressing to the right. if i press space again to stop and once again to start the indicator jumps left then progresses to the right. i cant even remember why it was an issue before but this time i just ignored it and so far i havent ran into any problems. -
What are the odd's of picking up 4g in a "Verizon 4G LTE Extended" area?
I may be moving to a area in 6month's that is listed as Verizon 4G LTE Extended area and it's right next to two places that are in Verizon 4G zones.
I have a S3 so I asked here. The area just got 4G and I don't even see it as a yellow dot on the big map yet.
If I don't get 4G then I may just have to drop verzion and go back to AT&T, becuase I can't live with the 300-400kbs I got last time I was up there.
P.S This part is a bit off topic, but is comcast better than TWC? ( Comcast is the only ISP in the area I may be moving to right now and they are not in the area I live now.)
ThanksI just went into the area and into the nearest town with "full" 4G LTE and it was messed up. I went into the verizon store in town that "should" have 4g and every phone in the store even the iphone 5 only had 3g . They told me the storm from 2-3month's ago did it.( AT&T 4g worked just fine) I was just starting to think maybe verizon got this network right.
I did pick up 4G LTE in the Extended area one time in one room of the home I may move into. So I guess thats a start. I would likely be more mad if I was moving there now than in 6 month's or so.
Thanks to all and I hope they fix it by the time I move. -
What are the odds? Repaired, New or Refurbished ZEN MIC
I recently RMAed my Zen Micro due to the headphone jack issue. Being the first time Im dealing with CREATIVE's customer service i decided to look back on past threads and I came across a couple that mentioned that for this issue Creative was sending stand-alone units believed by their users to be "refurbished", where most of them had other technical issues (back button malfunction, firmware issues. etc.)
My questions are:
Has anybody that had this problem got their Micro "Fix" or replaced with a "NEW" or "Refurbished" Unit's
If you got it fix how was your experience...better or worst?
If by chance you were lucky enough to get it NEW how was your experience....better or worst?
If you got a refurbished how is or was you experience with it....better or worst?
I'll appreciate your responses!
PS if any of the forums moderators (Catherina or Jeremy) could explain this process it will be also appreciated!True, how can we tell?...but when you hear the world refurbish by definition it means: "<!--StartFragment --><SPAN class=ResultBodyBlack><B>restore something to good repair: </B><SPAN class=ResultBody>to restore something to a cleaner, brighter, or more functional state"
<SPAN class=ResultBody>this could mean many things (and just in case, Im assuming):
<SPAN class=ResultBody>*An RMAed micro from someone else fixed and sent to you.
<SPAN class=ResultBody>*A guinea pig from firmware tests with a new hard disk.
<SPAN class=ResultBody>*The assumptions are endless... I don't work at creative.... I would fear the worst when I hear the word refurbish until otherwise they tell us how they do it!
<SPAN class=ResultBody>The point of all of this is that we all spent hundreds of dollars on these gadgets to receive one that you don't know its past history, now if the tell me.... that they'll fix mine that's another story (mine had no firmware issues, all buttons work fine....) so all they do is mess with it and send it back. Many people in these forums had complained that their replacements had gone bad after a few months. I didn't spend that amount of money to go through a different issue every few months...truly is not worth it.
<SPAN class=ResultBody>
<SPAN class=ResultBody> -
Ohh man, what are the odds?
Just bought a brand new imac for a month ago, and then apple shows this awesome, cool, new imac that I should have bought
If I just knew..If you've been an Apple fan for any length of time...you would know that new hardware is the back bone of Apple's success. New...innovative...ahead of the competition...and great at keeping its trade secrets. A new model coming out just after one has purchased the existing model is annoying, but think of the folks who bought that first iPhone for $600 and now one can purchase one for $100.
I think if one is contemplating making a large Apple computer purchase in the future, be sure to think long and hard if the model has been on the market for over a year. There is a good chance you'll be disappointed if you don't.
This is Apple's business plan and we'll have to live with it, and...their products are so great, I'm willing to do just that.
Anyone willing to go back to a PC? Didn't think so...virg. -
What are the odds of GTA coming to Mac for computer games?
Just wondering if there's any chance of Grand Theft Auto computer games coming to Mac.
ThanksNot great.
And don't get your hopes up either way -- even if the game is ported to OS X, a MacBook is not going to run it. You'll need a dedicated video card to get any kind of acceptable performance. Even the current generation of MacBook Pros have video cards from 14 months ago and probably wouldn't drive the game very well. -
What are the chances that an actual timestamp will be added to the Canon XF200 ?
I shoot depositions for a living and a timestamp is required sometimes. I upgraded to the XF200 from the XHA1s. the XHA1s had a timestamp so i assumed the XF200 would as well. I saw inthe manual that the time and date could be displayed so I bought the camera. you have to manually turn off all displays except the date and time. This works as long as you dont have to change your aperture, wb, or other settings. When you change any of these the display pops up and is also recorded. I'm just wondering why Canon would get rid of the timestamp. I asked if they could add it using a firmware update but all they said was that enough people need to ask for it. What is enough?
"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner. -
I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...) -
FAQ: What are the known issues so far in Photoshop CS6 Beta
APPLICATION COEXISTENCE
Lightroom 4 Beta + Photoshop CS6 beta -- Editing the same video file simultanously in both applications may result in an error, crash, or blank (transparent) frames. You might see this Photoshop error: "Could not complete the Render Video command because of a problem with Adobe Media Encoder".
This will only be an issue with Lightroom 4 beta and Photoshop CS6 beta on the same system, editing the same video. The released versions will not have this issue.
Workaround: Upgrade to LR Release version (even if it's just the trial), or don't open the same file in both apps at the same time.
CS5 Help fails to launch after install of CS6
Workaround: Launch the stand alone "Adobe Help" application or reinstall CS5
CROP
Crop action shows wrong crop box.Playing an action with a crop step that has dialogs turned on results in a crop box that covers the entire canvas instead of the expected area.
Workaround: Ensure that the Crop Tool is selected before running the action or disable dialogs for the action.
FILTERS
(32bit OS only) Initial "Merge to HDR Pro" image display and result is black until settings are changed
Workaround: It will remain black until droplist in the "mode" line is selected, changed and activated, then action appears to be normal.
Bokeh color is different from preview after render at certain zoom levels on particular image patterns
Workaround: View image at 100%
Lighting effects bump map generates artifacts if an alpha channel bump map is used. The resulting preview and final image is artifacted across the gradiated areas of the alpha channel.
Workaround: Do not use a gradiated alpha channel as a bump map
Liquify will perform the filter and save to just part of the photo if you click cancel while it is "finishing processing" a large file.
LAYERS
If a vector layer has a center-aligned stroke combined with an inside-aligned layer style stroke, then that vector layer's stroke may not display correctly -- part of the vector layer stroke will disappear as the layer is moved around the image.
Workaround: Use the "Path Selection Tool" to move your vector around -- alternatively, Change the stroke alignment or remove underlying layers.
Dragging a selection box while layer filters are applied stops marquee selection from following cursor movement
Workaround: Even though the graphic of the selection marquee stops, the selection still happens. OR Turn off layer filtering before targeting the layers using a selection box
TYPE
Editing text attributes in the Character panel when the layer is locked can result in a crash
Workaround: Unlock your text layer prior to attribute adjustments in the Character panel
Setting the menu type>font>preview size to "huge" after opening a saved file caused photoshop to crash
Workaround: Uncheck Background save in Photoshop CS6
Style by example or definition not working as expected:
If any attribute in the Paragraph Panel is set and you create a new Paragraph Style, the new style is based on the default and the override is not cleared.
DRAWING AND PAINTING
Paint is offset with Grip Pen- if you select the Soft Low Density Airbrush Preset with Grip Pen paint with swicth facing right with a high tilt towards you the cursor shows the spray should be going up, but it sprays down.
3-D
Creating a video timeline and rendering video from two 3D layers may not include ground plane reflections
Workaround: Use mesh for ground plane instead of 3D engines construct, or duplicate the file and remove the keyframes
Creating a New background texture after changing lighting presets results in crash
Workaround: Create the New background texture prior to adjusting lighting presets
Unable to create a constraint on extruded object with Pillow Inflate setting applied. Further actions may result in Photoshop instability or crash.
Photoshop may crash when trying to align/distribute constraints from selections of two 3-D extruded objects
Photoshop may not always save a texture when you paint directly onto the 3d object using Paint on Target Texture setting.
Photoshop may crash when selecting a different panel filter after the focus has been on 2 fields in the environment flyout with IBL map present
Photoshop may crash after embedding a 3D layer into a layer group, creating a new 3d object in the group, and then closing the document.
When changing the color of the lines or points in the 3D scene cross section from the Properties panel, side b color overwrites the color in side A.
Program Error when adjusting fill value in Layers panel while in Lighting Effects workspace.
Workaround:You will have to use opacity slider instead of fill slider to pull back the lighting effect
PLUGINS
DUPLICATE PLUGINS CAUSE ISSUES ON MAC:
If you install duplicate plugins or point the additional plugins folder preferences to a duplicate set of plugins (such as, to an older version of Photoshop), then it is possible for odd Photoshop behavior, such as an inappropriate file extension to appear when saving files.
(example: while performing a "save as" to JPEG file type, the file format appears to change to .dcm)
In this case, there may be a duplicate "file formats" plugin that's populating the Save As file types list with duplicates of the same options.
If there are duplicate file format plugins installed, the Mac OS will remove the duplicates from the list, but you may still see the odd saving behavior.
Solution:
Remove the duplicate plugins.
If you are not sure if you have this issue, but are seeing odd behavior, you can check for duplicates by looking through the plugins listed in the Help > System Info dialog.
Bridge
Unable to Copy and Paste in File info in Bridge
Workaround: Typing info in Manually works, or copy and paste work in Photoshop's File Info dialog
Install
Adobe Setup Utility may quit, or error during install. You may see error: "Exit Code: 15"
Workaround: Create a folder named 'Templates' at "<Windows drive>:\Users\<current user login id>\AppData\Roaming\Micorsoft\Windows\"
Message saying trial of PS CS6 beta expired,Content coming soon, stay tuned.
Workaround: re-launch photoshop CS6 beta. This issue should not happen anymore1. You can get full support for your camera by upgrading to Lightroom 4. But personally, I would wait for Lightroom 5 since it will be released shortly, probably within the next month. Lightroom 5 will work with Photoshop CS5. The only difference is that Lightroom will need to create a TIF or PSD file that contains all the changes you have made in Lightroom. That's not a big deal, in my opinion. That file has to be created at some point anyway whenever you use Photoshop.
2. Yes, Lightroom 4 will pass images back and forth between it and Photoshop.
3. The upgrade would not break Lightroom 3. It would essentially work the same as it does with your current setup.
4. If you purchase CS6 it is my understanding you will be allowed to use it indefinitely. This is not true of the Creative Cloud version. Support and updating for additional cameras will cease for CS6. Adobe has announced that they will make Camera Raw 8.1 so that it can be usable with CS6 as far as reading Lightroom adjustments. But any new controls will not be accessible.
5. So far, Adobe has indicated that they have no plans to making Lightroom a subscription-only offering.
You are asking your questions as though you are addressing Adobe directly. This is a User-to-user forum. I don't work for nor do I speak for Adobe. I am only giving you the information as I understand it. It seems to me that upgrading to Photoshop CS6 and Lightroom 5 is a "safe" choice. None of us, not even Adobe, really knows what the future will bring. Technology changes so quickly anymore that everything we are doing right now could be obsolete in a matter of a very short period of time. As Adobe changes their marketing strategies I think it will probably motivate some people to look elsewhere. I have Photoshop CS6 and I'm going to upgrade to Lightroom 5. Then I will have to wait and see what develops after that. At any rate, I have tools that I can use for the foreseeable future. If I have to change at some point then I will do so. -
FAQ: What are the JDI (Just Do It) features in Photoshop?
What are JDI features? They're "Just Do It" features: small features that don't take a lot of time to implement or test and seem like an obvious improvement.
JDI list for Photoshop CC
JDI features in Photoshop CS6, by category:
Automation
Contact Sheet II has been restored as an Automate option
PDF Presentation and Layer Comps to PDF have been restored as Automate options
Brushes
Add ability to record brush strokes in actions with "Allow Tool Recording" option
Brightness/contrast slider for textures when painting
Brush projection for static tips
Brush tip cursor reflects brush pose and jitter for round and captured tips
HUD brush resize and hardness can now change opacity - [Control] + [Option] + click drag up/down with General>Preferences> "Vary Round Brush Hardness based on HUD vertical movement" unchecked
Increase maximum brush size to 5000px
Change color dynamics to per stroke instead of per tip (user option for old behavior)
Channels
Enable Split Channels for documents with single layer (so you can split simple transparency)
Color Picker
allow clipboard paste into hex field with # in contents (i.e. #aabbcc), or 0x (i.e. 0xAABBCC)
allow shortcut hex values (i.e. #123)
Eyedropper
Add ignore adjustment layers options bar item for the eyedropper
New mode for eyedropper to select layers current and below
Show the sample size popup for the various eyedropper tools (black point, white point, etc.)
File Formats
Allow for reading more bit depths in TIFF files
Give the user choices regarding how they want transparency treated in OpenEXR on file open and save
Read BIGTIFF format (TIFF files over 4 Gig)
Read common stereo image pair formats (JPS, MPO, PNS)
GPU
Increased GPU stability by prequalifying GPUs on the fly before use
Grammar
Grammar policed throughout app
Use consistent grammar style in the title of dialog windows (no commands such as "Choose a color:")
Image Resizing
Auto-select the best resample method based on the type of resize (bicubic-automatic)
Importing
(Macintosh only) Import images from devices provides ImageKit scanning and camera acquisition support
Layers
Add bicubic sharper & bicubic smoother options when free transforming layers (menu in options bar)
Add dither options to Layer Styles for Gradient Overlay and Gradient Stroke
Allow 00 or Shift 00 to work when setting layer/fill opacity (previously no way to get 0%)
Allow changing color labels on multiple layers at once
Allow changing of blend modes for multiple layers at once
Allow locking of multiple selected layers
CMD+J to duplicate selected layers and layer groups (in addition to layers)
Layer tooltips to include layer name (if defined)
New command to rasterize layer effect into layer, merging the selected layers into themselves (Rasterize Layer Style)
Opt+click on toggle arrows (groups and effects)in layer panel should close all targets
Reorder effects in the layers palette to match the Z-order style/blend mode (bottom most effects in terms of blending order, drop shadow is below the other effects)
Show blend if/Blending Effects badge on layer if they are not default values
Show correct opacity and blend mode values for hidden layers
Tab goes to next layer on inline layer rename, SHIFT + TAB goes to previous
When creating a shape layer, the layer name should not be like "Shape 1" but instead reflect the tool named such as "Rectangle 1"
Liquify
Add option to load last mesh
Increase maximum Liquify brush size to 15,000
Resize Liquify brush with shortcuts: bracket keys [ ] now match same increments in Photoshop
ctrl (win) / cmd (mac) switches to magnifying glass
alt + right click + drag to change brush size (win)
ctrl + alt + left click + drag to change brush size (mac)
Masks
Enable Invert and Threshold adjustments for masks in 32-bit/channel
Plugins
Hold SHIFT during startup to disable Optional and 3rd party plugins
Presets
Add New Document presets for common devices (e.g. iPhone, iPad, etc.)
Add new Gradient Map presets for traditional print toning and split-toning
Sticky reorganization of tool presets (changes persist after relaunch)
New HDR Pro presets from RC Concepcion and Scott Kelby
Printing
Add "Edit" button for the description field in the print dialog
Allow print dialog and print preview window to be resized
Allow user to change the "preview well" background color in the print dialog
Allow user to manually position the printed area on the page
Hide color profiles that are inappropriate for currently selected printer when using "Photoshop Manages Color"
Reintroduce "Print selected area", allow user to modify selection in print dialog
Save
Add warning message that 16-bit images cannot display their file size in the Save as JPEG dialog
SDK
Add ability to access tool name associated with the tool preset name via scripting
Add the ability to return an array of guides in a document from the scripting SDK
Selections
Make the marquee, lasso, and mask panel feather values support decimal places like the feather dialog
Remember feather radius when showing dialog for selection from a path
Transform
Don't hide smart object icon when transforming a layer
Improve dragging of vector curves
Rotate 90 with even x odd pixel dimension to not land on a half pixel position
Preference to disable auto-rotate on open
Type
Add command to insert "lorem ipsum" for type
Added Gamma rendering parameter for better text rendering
UI
[Windows] New/open document to context click on a document tab (has always been on Mac, now Windows too)
Add "Don't show again" checkbox to Purge warnings
Remove the app bar and reduce the drag/app bar over 30%1. Mainstage - Even though I probably won't use Logic for live performance much, I love how simple, clean, and intuitive the interface looks. I will probably use this when composing as it seems to be one of the easiest ways to route drum pads, create keyboard layers, etc. really quickly, and the interface is very inviting.
2. Delay designer looks really fun. I remember spending 30 minutes once in Sonar trying to get the stupid delay to do a really simple thing. I finally gave up and layered the audio data to make my own delay because it didn't give me enough control to make it happen in the plugin. It looks like I could have just drawn it into the Delay Designer and been done with it.
3. Import from Garageband - Not a new feature, but I love using Garageband as a musical notepad when all I want to do is create something simple or jot down an idea. In this period, I don't need all the features of Logic, but I will eventually, and then I just open it up in Logic and get more advanced. -
What are the units of "Width" and "Height" of a Shape?
What are the units of "Width" and "Height" properties of a Shape when programming?
Something odd like points or twips or tweedles or nibbles?
http://www.ransen.com Cad and Graphics softwareWidth and Height are properties of type Single; they represent the dimensions of the shape in points, where 72 points = 1 inch.
Regards, Hans Vogelaar (http://www.eileenslounge.com)
Maybe you are looking for
-
Problems scanning with HP printer and Mavericks
I recently installed the GM version of Mavericks and tried to scan some stuff and it came up with this error "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only
-
How to send fax thru sap system
Hi all, I need to send a fax thru sap system. In the given parameter I need to give email address & fax number. The result is the content I shud receive as both email & fax. As far as email is concerned no problem. But I am not receiving the content
-
Net 1.1 apps broken after installing ODP 10.2.0.2.21
The .net 1.1 app, build in Borland/CodeGear's tool, shows a configuration complaint from asp.net (below). Two machines that just got this version of ODP are showing the same problem. In oracle\product\10.2.0\client_1\ODP.NET\bin\1.x I have: 08/10/200
-
Hello, I have a weird DFS issue I am having trouble fixing. Currently users at one of our site uses 1 file server which has DFS namespace enabled but is not replicating however if the users map to it via IP or Namespace or UNC they are sometimes able
-
Can I import my sbc/Yahoo calendar info into iCal?
I posted a similar query regarding my Address Book and contacts so if anyone is lurking in both forums, my apologies for any redundancies-.. I use Outlook on a PC at my office, and I have an sbcglobal/Yahoo mail account. I look upon my office Outlook