What are policy firewall port should be permit between meetingplace web external and internal

I deploy MeetingPlace Web Conferencing with SMA.
1. What are policy firewall port should be permit between meetingplace web external and internal (web external on DMZ zone and web internal on internal zone)?
2. Synchronized Globally Unique Identifiers (GUIDs) between internal and external Web Servers used firewall port?

Hi,
List of Firewall pots to be opened are mentioned in following document, you can refer your deployment type and open ports as mentioned.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_Audio-Only_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_WebEx-Scheduling_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_MeetingPlace-Scheduling_Deployments
Regards
Ronak patel

Similar Messages

What are the system ports that XI uses to invoke web services?

Hi guys,
Anyone knows what are the system ports that XI uses to invoke and to be invoked from web services?
I think it uses the port of AFW but I dont have sure
Thanks in advance,
Ricardo.

hi,
if you want to invoke a WS on the XI use
the j2ee port (5XX00)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

What are the different ports required to Deploy(Run) an application in NWDS

Hi all,
We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
So my query is , to build,deploy and run or debug a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
(Note: will the SDM port, debug port,Http port be enough to deploy and run an application)
Need your help on this
Regards,
Vijay

Hi Arun,
Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
Hope this Log details of the error that I get here helps you:-
Settings
SDM host : "ServerName"
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
Inner exception was :
Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
appreciate your valuable inputs.

What are all the certifications should i do?

Hii friends,
I introduce myself as a newbie in dis world of oracle plsql.Me having a experience of 2.5yrs in various but with a relevant exp of 6months on oracle10g plsql.And I think its the time for me to concentrate on doing certifications.
1) Could you folks can list out me what are all the certification should i go for.
2)And the books should I buy ????
3)Sites that provide mock exams????
I desperately need your valuable suggestions.
Edited by: user13310481 on Jun 23, 2010 10:53 PM

user13310481 wrote:
Hii friends,
I introduce myself as a newbie in dis world of oracle plsql.Me having a experience of 2.5yrs in various but with a relevant exp of 6months on oracle10g plsql.And I think its the time for me to concentrate on doing certifications.
1) Could you folks can list out me what are all the certification should i go for.
2)And the books should I buy ????
3)Sites that provide mock exams????
I desperately need your valuable suggestions.
Please start reading the following articles
http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html
http://forums.oracle.com/forums/ann.jspa?annID=794
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

TS1490 What are the Proxy, Port and Server settings supposed to be?

What are the Proxy, Port and Server settings supposed to be for itunes (windows 8)?
I havent been able to access itunes store for WEEKS, and i have gone through nearly everything to try and resolve it.

http://support.apple.com/kb/TS1490

I would like to buy used Ipad 3gen 32 or 64 GB   .What are the things I should check for.(and how to check it) It is cash deal -no warranty.

I would like to buy used Ipad 3 32 or 64 GB.It is cash deal and no warranty. What are the things I should check and how to do it ?

Make sure it is in perfect working order before you turn over any money.
Test connected to Internet.   Test Safari and several other apps for crashes.
If it passes this test, it must now have find my iPhone turned off by the seller.   They must also remove the device from their iCloud account.
*****Please observe this.   If the seller can't turn off find my iPhone, then it is not his iPad to sell.   It will lock when you try to activate and will be worthless.****
If this is the owner of the iPad he can also remotely erase the iPad with iCloud.
http://support.apple.com/kb/HT5661

What are the tools to create a digital magazine for ipad version and how can be place it in newsstand?

Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..

We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck.

What are the basic .jar files to be set in web dynpro project classpath

Hi,
I am having a problem while customizing the ESS. I used DTR, DC and imported configuration. After that, I created project from one of the DC(say ess/jp/addr). Later when I open an iView from any Web Dynpro component, I am getting lot of errors without even making any modifications.
I closed the project and reopened it and reload & rebuilt, but it doesn't solved my problem. In my classpath settings I couldn't find any jar files except the jre_lib. Could you please let me know what are the basic jar files we have to set in classpath and where to get them from. We are using NWDS 7.0.06 version.
Can you please let me know how to solve this or any other way to work around this.
It's an urgent to be fixed as early as possible, plz help me out.
Thanks & Regards,
Raj

Hi Julien,
Thanks for your reply.
We imported the the specified SCAs in our track.
we are getting the following errors.
Kind Status Priority Description Resource In Folder Location
Error The import com.sap.xss.per cannot be resolved CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 18
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument fpm of the method loadConfiguration CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 113
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument currentPerspective of the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument perspective of the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
we manually set below .jar files in classpath settings.
pcuixssfpm.jar
pcuixssutils.jar
logging.jar
essper.jar
Is there any alternative to work around.
Thanks & Regards,
Raj

What are the T-codes that contain the master data for material and vendor?

what are the T-codes that contain the master data for material and vendor?

hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat.

What are the commands available to read a file from application server and

What are the commands available to read a file from application server and store the file into an internal table?

Hi,
To read a file from an Application Server to an Object there is a command in ABAP called READ DATASET. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
Rewards points for useful answers.

What are the most important tables in SD, MM, PP, FI , CO and QM?

Hi all,
What are the most important tables in SD, MM, PP, FI , CO and QM? i.e. most used.
Thanks,
Charles.
+++++++++++++++++

In FI:
 BKPF Accounting documents (Header)
 BSEG Item level
 BSID Accounting: Secondary index for customers
 BSIK Accounting: Secondary index for vendors
 BSIM Secondary Index, Documents for Material
 BSIP Index for vendor validation of double documents
 BSIS Accounting: Secondary index for G/L accounts
 BSAD Accounting: Index for customers (cleared items)
 BSAK Accounting: Index for vendors (cleared items)
 BSAS Accounting: Index for G/L accounts (cleared items)
In SD:
 VBAK Header data
 VBAP Item data
 VBPA Partners in sales order
 VBKD Sales district data
 VBEP Data related to line items, delivery lines
 VBRK header data
 VBRP Item data
 LIKP Delivery header
 LIPS Delivery item
 VTTK Shipment header
 VTTP Shipment item
 VTTS Stage in transport
 VTSP Stage in transport per shipment item
 VTPA Shipment partners
 VEKP Handling Unit - Header Table
 VEPO Packing: Handling Unit Item (Contents)
In MM:
 EKKO Purchase document
 EKPO Purchase document (item level)
 EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
 EKET Delivery schedule
 VETVG Delivery Due Index for Stock Transfer
 EKES Order Acceptance/Fulfillment Confirmations
 EKKN Account assignment in purchasing
 EKAN Vendor address purchasing
 EKPA Partner functions
 EIPO Item export / import data
 EINA Purchase info record (main data)
 EINE Purchase info record (organisational data)
 EORD Source list
 EBAN Purchase requisition
 EBKN Purchase Requisition Account Assignment
 MKPF material document
 MSEG material document (item level)
 MARA Material master
 MAKT Material text
 MARC Material per plant / stock
 MVKE Material master, sales data
 MARD Storage location / stock
 MSKA Sales order stock
 MSPR Project stock
 MARM Units of measure
 MEAN International article number
 PGMI Planning material
 PROP Forecast parameters
 MAPR Link MARC <=> PROP
 MBEW Material valuation
 MVER Material consumption
 MLGN Material / Warehouse number
 MLGT Material / Storage type
 MPRP Forecast profiles
 MDTB MRP table
 MDKP Header data for MRP document
 MLAN Tax data material master
MTQSS Material master view: QM
In QM:
 QALS Inspection lot record
 QAMB Link inspection lot - material document
 QAVE Inspection usage decision
 QDPS Inspection stages
 QMAT Inspection type - material parameters
 QINF Inspection info record (vendor - material)
 QDQL Quality level
 QDPS Inspection stages
In PP:
 AUFK Production order headers
 AFIH Maintenance order header
 AUFM Goods movement for prod. order
 AFKO Order header data PP orders
 AFPO Order item
 RESB Order componenten
 AFVC Order operations
 AFVV Quantities/dates/values in the operation
 AFVU User fields of the operation
 AFFL Work order sequence
 AFFH PRT assignment data for the work order(routing)
 JSTO Status profile
JEST Object status
 AFRU Order completion confirmations

What are the Best Recommended Products for Mac OS X Server (Apache and ???)

I investigated Oracle and PHP combo for robust database services to be able to create forms, store employee applications, resumes, do financial requests, invoices, ecommerce stuff, document and lists collaboration like Microsoft Sharepoint using Internet Information Services (IIS) and SQL Server, etc. What are recommended products that I can easily develop in to code and do the requested stuff using Mac current (Apache and ????) technologies?

Of course it depends on your needs, but the OS X server already comes with Apache, Ruby On Rails, Python, Perl and SQL.

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

What's the difference between a web site and a web application?

I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

Whats is the different between iphone sim free and international(unlocked)??

Greetings sir,
whats is the different between iPhone sim free and international (unlocked)?? as i want to buy anew one from USA, but i didn't found it international, so can i buy it (SIM free) and will it work in Egypt?

Apple has not announced when or if it will be offering unlocked iPhone 6 in the U.S.

What are policy firewall port should be permit between meetingplace web external and internal

Similar Messages

Maybe you are looking for