What are possible FI authorizations to users??

Hi,
I need to go to some company as func. consultant in FI & their requirement will be maintaining their users(they hav areound 3000 users) authorizations in FI .
For ex: user can post to only certain G/L accounts etc.
I know how to create users & profiles but dont know what will be authorizations the client will ask in general.
plzz send me the related docs & some idea ...if U hav any..
points 'll be rewarded to say thanks to you..
Krishna

Hi
Check PFCG, where all the authorizaiton are maintained.
Best Regards
Ashish Jain

Similar Messages

What are possible causes for frequent loss of wireless mouse connectivity other than the batteries ?

What are possible causes for frequent loss of wireless mouse connectivity other than the batteries ?

Wi-Fi or another interference source. Try turning off the Wi-Fi and see if the problems continue. If that solves the problem, see if you can set your Wi-Fi to run in the 5 GHz range.
Keyboard/Mouse – Troubleshooting Wireless
WIFI AND BLUETOOTH FINALLY SOLVED, NO REALLY - YOSEMITE 10.10
Bluetooth Wireless Problems
Bluetooth devices become unresponsive

What are possible reason for error : FRM-40657

Hi,
There is 3 blocks in my form, Master Block, It's Deails and It's Details also.
The Query Data Source for all the block is Procedure, because for each block the data is coming from one more table other than the DML table.
But I am getting the error FRM:40657 while editing the data, the flow of the system is, if the data in the block satisfy certain condition, then that row should be saved to DML table. For eg, there is one column Status if the value of the status column is Valid then that row should be saved to DML table, all the data coming from the non DML table is InValid, and the data from DML table is Valid,
but after loading, when I change InValid to Valid, because some rows the user want to change to Valid then obviously it should be saved to DML table , but I am getting this error, What could be the pblm...
Thanks in advance

Hi Mark,
Thank U. No other user has updated the data. As I said, the problem occuring datas are coming from Table A, and let the user to modify the data, after the modification, copy of some records (based on the data after modification ) want to be saved to DML table, say Table B. But this error is getting while try to save the modifications. But no problem to save the DML table (Table B) data.
Hope U understood the requirements. Thanks in advance.
Rizly

What are possible career paths after 7 years of database administration?

Hi, what is most common choice for Oracle production DBA with 5 years< experience, if he wants to change his career ? Is it possible to become Oracle Architect without Java/PL-SQL programming experience, but knowing many oracle products such as OBIEE, EBS etc ?

>
Hi, what is most common choice for Oracle production DBA with 5 years< experience, if he wants to change his career ?
>
Have you considered early retirement? A lot of DBAs I know got burnt out after about 5 years of dealing with management that wouldn't let them fix what needed fixed!
Seriously, though, your dba skills could be a good fit for a system architect position. Those positions often involve multiple systems, network and configuration issues, security, compression, encryption and job control to make it all work together.
Pick the brains of an architect coworker and start getting familiar with the documentation that architects work on: system diagrams, System requirements documents and other docs that may already be available where you work now.

How to know what are t code assigned to user with out execution

how to disable the authorisations to perticular t cde

Hi Ramesh
If you want no user wants to use a particuler T code, you can lock the tcode using SM01 (Lock transactions).If you want to know the T codes assigned to a user go to T code SUIM - > Roles---> BY user assignment -
> feed your user name & execute (F8). In the next menu on application tool bar you will find Transaction assignment tab click the tab that's it you will find list of t codes you are allowed to use in the client.For this you can also use S_BCE_68001419 directly insted.
Regrds...
S.Manu

HT4759 what are the limitations for PC users using iCloud?

I am considering iCloud for storing music, photos etc. Are there any significant limitations for PC users? Our family employs a mix of Apple and PC devices.

Of course, iCloud does a better job on Apple devices like iPhone, iPad and Mac, because it seamlessly works with the pre-installed apps like Mail, Contacts, Calendars, Reminders, Notes etc., but you could also use some of the features on a PC. This guide shows you, how you could set up iCloud on a PC: http://www.apple.com/icloud/setup/pc.html
On a PC you sync iCloud Mail, Contacts, Calendars, and Tasks via Outlook, snyc Bookmarks and Photos.
Some other Services like iWork apps (Numbers, Pages and Keynote) or Find My iPhone are missing, but accessible through the website www.icloud.com (new Chrome or Firefox needed)
By the way, iTunes is still needed for managing your music library.

What are possible issues during BIOS update?

Hello everybody,
I am having a problem with the battery of my old Toshiba - 'plugged in, not charging'
Searching the internet I found out that the BIOS update could possibly solve the problem.
On the other hand the BIOS update procedure can itself cause some sever problems....
Does anybody know what precautions can/should I take to avoid such problems or be prepared to resolve them easily... something like BIOS recovery disk, etc?
Many thanks in advance
IG

Hello
In worst case the update could fail and destroy the ROM module. That means the computer will not boot anymore the ROM module must be reflashed from a notebook technician. Thats fact!
But if you have any problems with battery charging control I must agree MisterX because I doubt it has something to do with BIOS. I mean even with oldest BIOS version, the battery will be charged if AC adapter is connected because its hardware controlled and has nothing to do with BIOS.
In my opinion you should try another battery and/or AC adapter. Important point is that a battery can be recharged only 500 times after then you must replace it.
Check this!!!

T61p, What are possible hybernation modes

Since WU updated to Vista 32 SP2 and TVSU update the bios (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67988), i notice the hybernation is not running the same way as previously, meaning when the system goes into hybernation it still uses the battery while that was not the case with hybernation before (sleep mode of course yes)
I ran powercfg -a and notice the firmware of T61p does not support S1, S2, S4 standby type (details here http://www.vistax64.com/attachments/tutorials/1473d1192891496-power-options-sleep-mode-problems-bios...)
S4 must have been running before since the hybernation mode wasn't relying on the battera but performed a 'save to disk'.
At hybernation wake up, the system rehybernate again automatically unless a keystroke is made
Has anybody noticed the same issue, and possibly found a solution to address it ?

This post might help.
Good luck,
Frank
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

What are possible ways to return the raw data in the corresponding cell of another sheet?

Numbers on iMac under Maverick. For each sheet in a spreadsheet (Numbers file) I have provided a corresponding sheet (to replace it). In the new sheet I want to insert a formula referencing the corresponding cell in the new sheet, but so that I can delete the original sheet. If the formula referencing the cells in the original sheet returns the resultant data in place of the formula, this will enable me to use this method to work through a largish file (and others like it) with comparative ease. Can this be done, for example, by stipulating a particular format for the recipient cell?

Top righthand corner of the page.

What Are the Tables in new oracle 10g express

Hi guys,
I am new at oracle and I just installed the Oracle 10g express. after login to the oracle by SQL Developer I noticed there are lots of tables in table folder which some of them come with $ and some not! can you please let me know what are these tables for? are they like system tables in SQL Server? if so then what are the tables under
-->Other Users/System/Tables?
I am lost here and I can't figure out what are the Other Users? are they like databases? I tries to google them but I couldn't find any thing
Thanks a lot

http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/toc.htm
SELECT USERNAME FROM ALL_USERS;
USER/SCHEMA are to Oracle; what database is to SQL_Server
Edited by: sb92075 on Apr 22, 2011 5:53 PM

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

What are the authorization need to be given for a Key Users in BW?

Can you help me out for this question please.
Thank in advance.
Kay
What are the authorization need to be given for a Key Users in BW?

Hello,
check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
you can use the template role to dfine your own roles for Key User: S_RS_RREDE BI Role: Reporting Developer (Development System)
Hope it help
regards

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

What are possible FI authorizations to users??

Similar Messages

Maybe you are looking for