What are possible reason for error : FRM-40657

Hi,
There is 3 blocks in my form, Master Block, It's Deails and It's Details also.
The Query Data Source for all the block is Procedure, because for each block the data is coming from one more table other than the DML table.
But I am getting the error FRM:40657 while editing the data, the flow of the system is, if the data in the block satisfy certain condition, then that row should be saved to DML table. For eg, there is one column Status if the value of the status column is Valid then that row should be saved to DML table, all the data coming from the non DML table is InValid, and the data from DML table is Valid,
but after loading, when I change InValid to Valid, because some rows the user want to change to Valid then obviously it should be saved to DML table , but I am getting this error, What could be the pblm...
Thanks in advance

Hi Mark,
Thank U. No other user has updated the data. As I said, the problem occuring datas are coming from Table A, and let the user to modify the data, after the modification, copy of some records (based on the data after modification ) want to be saved to DML table, say Table B. But this error is getting while try to save the modifications. But no problem to save the DML table (Table B) data.
Hope U understood the requirements. Thanks in advance.
Rizly

Similar Messages

What are possible causes for frequent loss of wireless mouse connectivity other than the batteries ?

What are possible causes for frequent loss of wireless mouse connectivity other than the batteries ?

Wi-Fi or another interference source. Try turning off the Wi-Fi and see if the problems continue. If that solves the problem, see if you can set your Wi-Fi to run in the 5 GHz range.
Keyboard/Mouse – Troubleshooting Wireless
WIFI AND BLUETOOTH FINALLY SOLVED, NO REALLY - YOSEMITE 10.10
Bluetooth Wireless Problems
Bluetooth devices become unresponsive

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Possible reasons for Error 30005?

Hi All,
we're on ep7, sp12..we've been encountering the foll error lately when we try to use any BI query frm one particular BW system..(holds true for all users)
when we try to drag the query to the iView, we get the Error -30005, Cannot create the BI data service, Cannot add BI data service to the iView.
the strange things is we can search for queries. however, upon attempting to see the characteristics, etc we get the foll error: "Error -30027 Cannot retrieve structure, Cannot read query description.."
Could anybody pls advise on the possible reasons/resolutions for this?
thanx
prachi

Hi Prachi,
I feel with you. I have the same problem and just a few hours ago everything was working fine. thats very strange.
Mark

What are the reasons for disabling the saving of data in a PDF?

I seem to have had more than my share of encounters lately with PDF files that have editable fields but have their data saving capability disabled.
In some of these situations this has been an absolutely maddening inconvenience.
When I attempt to bring this to the attention of whomever's responsible I get brushed off.
One person's response was: Actually the majority of the PDF forms I have are Adobe reader and you cannot make changes electronically at all. The reason for this is to make sure that the documents are not altered in any way. The <companies creating the PDFs> must make sure that changes are not being made to their forms.
I just don't understand that. How is entering and saving data 'altering' a PDF?
Is this just bone-headed bureacracy, an urban legend, or is there some fundamental practical matter I am not aware of?

Saving a filled-in form has always been disallowed with Adobe Reader, formerly known as Acrobat Reader. Though there are a few exceptions...
History lesson:
Forms features were first introduced in Acrobat 3. As you might imagine, a number of folks wanted to be able to save filled-in forms using Acrobat Reader. Since this functionality simply was not a feature of Reader, it was not possible. If you wanted to save a filled-in form, you needed to use Acrobat (Exchange).
Upon recognizing the potential market for a product that they could sell, Adobe developed and released Acrobat Business Tools, which was a version 4 product. It was positioned between Reader and Acrobat, was reasonably priced, and allowed users to save filled-in forms, apply digital signatures, and add comments. Unfortunately, this was marketed poorly and did not achieve commercial success.
The next iteration was a similar product named Acrobat Approval, which was a version 5 product. It too could save a filled-in form, but was in some ways more limited than Business Tools, and suffered a similar fate. That is, it was not a market success. It was however distributed for free to US taxpayers on the IRS tax products CD-ROM.
The next idea from Adobe - which was a good one - was to provide for a means of embedding usage rights in a PDF document. These rights would allow Reader to do things it normally would not be able to do, such as saving a filled-in form, adding comments, importing/exporting form data, creating new pages using templates, connecting to databases and web services, etc. At first, the only way to enable these usage rights was with an expensive product from Adobe, so the potential was initially not realized.
With the release of Acrobat 7, Acrobat users were able to add some usage rights, such as commenting. While this was a welcome addition, folks still wanted to be enable forms to be saved with Reader. Finally with the release of Acrobat 8 Pro, users were able to enable forms to be saved with Reader, but it came with licensing restrictions. In short, if the licensee distributed the form for more than 500 recipients, the licensee could use data from no more that 500 copies of a particular form that was returned to them, including hardcopies. This was great for forms used inside of an orginization, but not so great for forms that needed to be used by the general public. Still, it was a very useful feature for a majority of businesses for internal forms, the vast majority of which have fewer than 500 employees.
Acrobat 9 or 10 didn't change things. Adobe still wants to capitalize on this market, which certainly is not a bad thing for Adobe and their stockholders. The US IRS forms have long been saveable with Reader because they licence Adobe Reader Extensions, which provides revenue for Adobe.
Note that some third-party PDF viewers allow users to save filled-in forms whether or not the documents have usage rights. Such software has a different marketing model than does Adobe Reader/Acrobat, and rides the coattails of Adobe by taking advantage of the popularity of PDF forms.

What are the reasons for following Javascript error in Report Viewer

Post Author: dhuka
CA Forum: Crystal Reports
Hello Everybody!
I am using Crystal Reports 10 in my web application. But unfortunately I am surrounded with strange problem related to it because of which I have been unable to deploy is on client-side. In my application the error given below is displayed as javascript error in Report Viewer and report is not displayed. But more frustrating part is that I am getting the same error due to different problem with reporting and I am stuck with it as I am unable to figure out what's causing the error now. Earlier this error appeared due to problem with parameter passing to stored procedure which I resolved it and error vanished but once again it has shown up. Moreover this error now appears less frequently and randomly therefore it is even difficult to trace the cause.
Problem with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
Line: 40Char: 12Error: Expected ')'Code: 0URL: http://myServer/myApp/myForms/myReports/ReportViewer.aspx
So can anybody tell me what factors might be causing this errors as the error text is very vague in nature and gives no idea about the actual error.
Guys, I hope for your kind co-operation.
Regards,

Post Author: dhuka
CA Forum: Crystal Reports
Thanks for you reply Krishna.
But this syntax error is the one that is creating problem for me as I cannot trace it. The form ReportViewer.aspx contains only a report viewer object which remains un-binded to any ReportDocument even at runtime.
At code behind ReportViewer.aspx I have code below that associates SQL Stored Procedure Parameter and Report Filter along with report name. Once all above is associated with ReportDocument, I export ReportDocument to PDF file format and display the report. Here I dont' even bind ReportDocument with my ReportViewer. Moreover, as I mentioned previously this error is encountered randomly (with no reasonable explanation so far) on client PC (while browsing through application).
I hope below code give you good idea of the way I am implementing my reporting.
Looking forward to you solution. Please note that I am only passing the ReportFileName and Parameter and Filter Criteria to this form while dataTable by itself using the connection information.
<<<<<<<<<<<<<<<<<CODE BEHIND of REPORTVIEWER.ASPX>>>>>>>>>>>
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim strKeys() As String
Dim strReportFilter As String
Dim strReportName As String
Dim strError As structError
Try
ReDim strKeys(0)
If strReportName = "" Then
strReportName = Context.Session("ReportName").ToString()
If Not Session("ReportParameters") = Nothing Then
Dim char_Delimiter() As Char = ";".ToCharArray()
strKeys = Session("ReportParameters").ToString().Split(char_Delimiter)
End If
If Not Session("ReportFilter") = Nothing Then
strReportFilter = Session("ReportFilter").ToString()
End If
Else
Session("DataTable") = Nothing
End If
If Not ViewParameterReport(strReportName, strKeys, strReportFilter, strError) Then
ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
Exit Sub
End If
Catch ex As Exception
strError.strMsg = Err.Description
ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
Finally
End Try
End Sub
Private Function ViewParameterReport(ByVal str_ReportName As String, ByVal str_ReportParameters() As String, ByVal strReportFilter As String, ByRef strError As structError) As Boolean
Dim str_ReportPath As String = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
Dim crLogInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
Try
str_ReportPath = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
o_Rpt = New CrystalDecisions.CrystalReports.Engine.ReportDocument
o_Rpt.Load(str_ReportPath & "\rpts\" & str_ReportName)
If Context.Session("DataTable") = "" Then
crLogInfo = New TableLogOnInfo()
crConnectionInfo = New ConnectionInfo()
crLogInfo = o_Rpt.Database.Tables(0).LogOnInfo
crConnectionInfo = o_Rpt.Database.Tables(0).LogOnInfo.ConnectionInfo
clsDbCnn.SetDBProperties()
crConnectionInfo.ServerName = clsDbCnn.Server
crConnectionInfo.DatabaseName = clsDbCnn.Database
crConnectionInfo.UserID = clsDbCnn.UserID
crConnectionInfo.Password = clsDbCnn.Password
crLogInfo.ConnectionInfo = crConnectionInfo
o_Rpt.Database.Tables(0).ApplyLogOnInfo(crLogInfo)
Else
ds_MISReports = New DataSet()
ds_MISReports = CType(Session("DataTable"), DataSet)
o_Rpt.SetDataSource(ds_MISReports)
End If
If Not IsPostBack Then
Dim param_Fields As CrystalDecisions.Shared.ParameterFields = New ParameterFields()
Dim iCount As Integer
If str_ReportParameters.GetUpperBound(0) <> 0 Then
For iCount = 0 To str_ReportParameters.Length - 1 Step 2
o_Rpt.SetParameterValue(CStr(str_ReportParameters(iCount).ToString()), CStr(str_ReportParameters(iCount + 1).ToString()))
Next
o_Rpt.RecordSelectionFormula = strReportFilter
End If
End If
'crViewer.DisplayGroupTree = False
'crViewer.ReportSource = o_Rpt
SetDBLogonForReport(crConnectionInfo, o_Rpt)
Dim TargetFileName As String
Dim fs As System.IO.FileStream
Dim FileSize As Long
Dim GenDS As DataSet
'Dim oRD As New ReportDocument()
Dim crReportObject As CrystalDecisions.CrystalReports.Engine.ReportObject()
Dim oExO As ExportOptions
Dim oExDo As New DiskFileDestinationOptions()
'Build Target Filename
TargetFileName = str_ReportPath & "\Pdfs\" & Session.SessionID & ".pdf"
'Export to PDF
oExDo.DiskFileName = TargetFileName
oExO = o_Rpt.ExportOptions
oExO.ExportDestinationType = ExportDestinationType.DiskFile
oExO.ExportFormatType = ExportFormatType.PortableDocFormat
oExO.DestinationOptions = oExDo
o_Rpt.Export()
o_Rpt.Close()
'Send the file to the user that made the request
Response.Clear()
Response.Buffer = True
Response.AddHeader("Content-Type", "application/pdf")
Response.AddHeader("Content-Disposition", "attachment;filename=MyReport.pdf;")
fs = New System.IO.FileStream(TargetFileName, IO.FileMode.Open)
FileSize = fs.Length
Dim bBuffer(CInt(FileSize)) As Byte
fs.Read(bBuffer, 0, CInt(FileSize))
fs.Close()
Response.BinaryWrite(bBuffer)
Response.Flush()
Response.Close()
o_Rpt = Nothing
Return True
Catch ex As Exception
strError.strMsg = Err.Description
Return False
Finally
crConnectionInfo = Nothing
crLogInfo = Nothing
End Try
End Function
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, _
ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
Dim count As Integer
For count = 0 To myTables.Count - 1
Dim myTableLogonInfo As TableLogOnInfo = myTables(count).LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTables(count).ApplyLogOnInfo(myTableLogonInfo)
myTables(count).Location = myConnectionInfo.DatabaseName & ".dbo." & myTables(count).Location.Substring(myTables(count).Location.LastIndexOf(".") + 1)
myTables(count).LogOnInfo.ConnectionInfo.ServerName = myConnectionInfo.ServerName()
Next
End Sub

What are the reasons for using absolute paths to embedded objects in word?

Hello,
hopefully someone can answer me the question why word always stores the absolute paths to linked objects? We use Word for documentation and these documents are stored in a version control system and sometimes several persons are working on a document. Because
of the absolute paths stored in the document all users would need to have the same directory structure so that the links would work for every person.
For linked objects it's not even possible to change the absolute paths to relative paths.
Additionally I would like to know what the difference between a "Graphic" and "Picture" object is. A graphic can be inserted by selecting "INSERT" -> "Pictures" and a "Graphic" doesn't seem to have a field
function and always uses absolute paths. "Graphics" can be inserted by selecting "INSERT" -> "Quick Parts" -> "Field..." -> "IncludePicture" and it's possible to use relative paths for "IncludePicture"
objects and it's possible to show the field function of a "Picture" object.
Regards
Martin

This seems to be by design, not too much information about this. The thread below should be helpful for you to understand it:
https://social.technet.microsoft.com/Forums/office/en-US/6d4445e1-cdc5-4b3b-9355-9081c963fdd9/unable-to-use-relative-object-links-in-word-office-2010-sp1
Also, from the thread below, you will find some workarounds for this issue:
http://windowssecrets.com/forums/showthread.php/102080-Relative-Paths-in-Word-Fields-(All)?p=584769&viewfull=1#post584769
Aravindhan Battepati

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

What are the possible reasons for bill simulation fail on one day or

one period? Thanks.
ie:
Bill sim process flag is X in table ZET_SM_BIL_DAILY on a particular day or a particular short period.
Edited by: dan421 on Oct 24, 2011 11:23 PM

Hi,
There are many reason for faliur of bill simulation, can you please eloborate what error message you are getting.
Ritesh

ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR

hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..

hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull.

When I try to install CS6 Design and Web Premium from a disk I get this message "We are unable to validate this serial number..." What is the reason for this?

I purchased a disk copy of CS6 Design and Web Premium from a reputable seller last week and when I try to install it with the serial number I got it says "We are unable to validate this serial number for CS6 Design and Web Premium. Please contact Customer Support." What is the reason for this?
Is the serial number invalid?

Hi Ned,
Thanks for the suggestion. I eventually got in touch with Adobe Technical Support and it turned out that my Adobe Application Manager was not the latest version. They downloaded the latest version and installed it and that seemed to solve the problem. I was able to install my CS6 Creative Suite and validate the serial number. All seems to be going well at the moment.

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Error FRM-40657:Record Change or deleted by another user

Hi dears
Please HELP ME
I have a form with multiple blocks and relationship between them
I can insert in all of the blocks
but I can not update the exiting rows in ANY block in application.
I can update the rows from outside of the application
it returns me this error:
FRM-40657:Record Change or deleted by another user
the properties about insert allowed,update allowed and so on are all YES in all blocks
Would you please advise me about that?
Need your help
thanks
Shahram

This error occurs because the record as held in the Form is not the same as that held on the database. When Forms locks a record it checks the value of every database item on the Form with that currently stored in the database, and if the two are not the same it issues this error.
This can happen for a number of reasons e.g.
1. You may want to look at date fields and ensure the time component is being taken into account i.e. the LAST_MODIFIED column is stored as '01-JAN-2001 15:34:56' on the database but is stored as '01-JAN-2001 00:00:00' (a truncated date) on the Form.
2. Check to see if there are any database triggers which alter the values of columns.
You may need to go through every database item on the Form and compare it with the value on the database. Having found a discrepancy in values you need to determine why this occurs.

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

Error: FRM-40657, Block based on Procedure

Hi,
I have a detail block, its Qry Data Source is Procedure, and the DML is to a table,
The data is loading from two table say A and B, but the DML is to table B only.
The pblm is when editing the data from A(if the data loaded from the Table A satisfy certain condition then I have to store that data into Table B along with other data selected from table B, i am getting the error FRM - 40657.
Thanks in advance

Hi,
You are running into the error because you are trying to change or delete a record when you have already 'locked' it by viewing it in your form.
If you do need to do it this way, you will have to clear data from table B and then do the updates/inserts and then requery the data.
Hope I've understood what you mean!
L :-)

What are possible reason for error : FRM-40657

Similar Messages

Maybe you are looking for