What are post installation steps for SOA 10.1.3.5 patchset on Windows

Hi all ,
what are the post installation steps in windows after applying SOA patchset 10.1.3.5 on 10.1.3.1
Thanks,
Durga

Hi 924979,
may I ask cause I have same exactly this issue on solaris 10 and what do you mean with :
edit the (two) opmnctl scripts to change "tr" to "/usr/xpg4/bin/tr" ?
Need your suggestion since I change PATH environment variable but still error and The installer cannot find the system application ascontrol ("opmnctl status -app") in the OC4J instance. All system applications should be present even if they are in a stopped or non-routable state. This is generally due to a situation where OPMN has been shutdown ... bla bla bla .. (stop in 83%)
need advise
Regards,
Thanks

Similar Messages

What are the installation steps for Oracle Fusion HCM

Hi all
I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
Thanks

If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
Atul has also posted some good stuff on installing:
http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

Post Installation steps for Solution Manager 4.0

Hi Experts,
Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
Thanks & Regards
Sunil

Hi
In installtion guide you can find the information you needed also check
Visit for step by step details of Standard Configuration of Basic Settings
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator how to install and
configure solution manager
https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
and for Maintenance optimizer setup
https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if needed more information
Regards
Uday

What are the post installation steps for sap 4.7ee

what are the post installation steps for sap 4.7ee

Hi,
Post installation steps are as follows.
1.SICK to be run first to checkt the errors while installation.
2. Install SAP GUI
3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
4. Change the default password of SP* and DDIC.
5. Set up the operations mode using RZ04 and SM63.
6. Apply patches through SPAM.
7 Schedule default background jobs through SM36.
8 Import default profiles through RZ10.
9. Schedule backup calender through DB13.
10. Create clients using SSC4
11. Install lisence
12. Schedule SGEN

Post Installation Steps for ERP add-on Inventory Manager 4.0

Hi,
I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
Best Regards,
MC
Stephen Streeter Manju Venkatesha

Yeah...of course...
I forgot to specify it.
I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
All installation are not MCOD.
This mean every installation has its own DB with different SID for every installation.
And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
The total space of mount point is about 500 GB....
Thanks
Dan

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

Post Installation steps for Messages archiving from Adapter engine

Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar Bolisetty

Hi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime

Post installation steps for PI 7.0

Hi,
Can anybody send me the Post installation steps for PI 7.0?
Thanks in advance..
~Kumar

Hello,
 
We did PI Installation recently and version is 7.1
 
Steps are as under...
 
 1. Basic PI installation
 2. System checks after basic installation
 a. SM50
 b. SM21
 c. ST22
 d. SM12
 e. SM13
 f. SM37
 3. Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
 4. Change 001 client settings back to no changes allowed.
 5. Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
 6. Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
 7. Import profiles (RZ10)
 8. Add the 4 following entries in to the instance profile and restart instance(RZ10)
 a. DIR_TRANS =
hostname.domain.ext\sapmnt\trans
 b. icm/host_name_full = hostname.domain.ext
 c. login/system_client = 100
 d. icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
 9. Configure TMS in transport domain controller{PI DEV} (STMS)
 a. Add virtual system
 b. STMS in newly installed system and configure proper transport domain
 c. In domain controller approve the new system (STMS -> SAP system -> Approve)
 10. Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
 11. Kernel Update JSPM
 a. JSPM update
 b. Kernel update
 c. BC-FES-IGS update
 12. Support pack installation ABAP
 a. SPAM update
 b. Support packs update
 13. Support pack installation JAVA
 a. Apply support pack stack
 b. Apply support pack patches
 i. After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
 c. Restart JSPM and continue patch installation
 14. Client copy from client 001 to X00 using profile SAP_ALL
 15. Create logical system and assign it to new client (SALE)
 16. Change UME target in JAVA to client X00.
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Management -> Infrastructure -> Destination
 c. Logon data TAB change client to X00
 d. Restart JAVA Instance
 17. Create following users
 a. PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
 b. PISUPER in new system and assign appropriate roles in ABAP and JAVA
 c. SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
 d. JCoRFC_<SID> in new system
 e. Sapadm user in new system
 18. Assign roles and groups to BASIS team on JAVA Stack
 19. Create PUBLIC logon group (SMLG)
 20. Configure SLD collector job as sapadm (RZ70)
 21. Run Configuration Wizard
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Configuration management -> Scenarios -> Configuration Wizard
 c. Select Initial Configuration and click Start.
 22. Create the JCoRFC connection.
 a. Enter URL as http://hostname.domain.ext:port
 b. Web Dynpro -> Content administrator -> Maintain JCo destination
 c. Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
 i. WD_ALV_METADATA_DEST
 ii. WD_ALV_MODELDATA_DEST
 iii. WD_MODELDATA_DEST
 iv. WD_RFC_METADATA_DEST
(Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
(Use the master password for EXQ)
 23. Repeat for the remaining 3 JCo RFC destinations.
 24. Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
 25. Create RFC destination in to ERP target system (SM59)
 a. Give Name PI_INTEGRATIONSERVER
 b. Connection type H
 c. In Technical settings TAB provide
 i. Target host = hostname.domain.ext
 ii. Path Prefix = /sap/xi/engine/?type=entry
 iii. User information is blank
 26. Setting SXMB_ADM ERP target system
 a. Open Integration engine configuration
 b. Goto -> Change Global Configuration Data
 c. Role of Business system = Application System {This is optional}
 d. Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
 27. Schedule Standard Jobs as SAPADM in client X00.
 28. SICF service to activate
 a. /default_host/sap/public/bc/pictograms
 b. /default_host/sap/public/bc/webicons
 c. /default_host/sap/public/bc/its/designs
 d. /default_host/sap/public/bc/workflow
 e. /default_host/sap/bc/ccms
 f. /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
 g. /default_host/sap/bc/webflow
 h. /default_host/sap/bc/workflow
 i. /default_host/sap/bc/workflow_xml
 j. /default_host/sap/bc/xmb
 k. /default_host/sap/bc/ping
 l. /default_host/sap/xi/wsdl_sr
 m. /default_host/sap/xi/wsdl_url
 n. /sap/bc/webdynpro/sap/appl_soap_management
 29. Adjusting JNLP Heap size
 a. Open the Exchange profile through the link u201Cadministrationu201D from the web page of the Process Integration tools.
 b. Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
 c. Value = 1024
 d. Save the change and restart the J2EE instance of PI so that the new value can take effect.
 30. Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
 a. RFC Destination = AAE_<SID>
 b. Connection type = G
 c. Target Host = Host Name of AAE Server {PI Server}
 d. Service No. u2013 HTTP port number of AAE Server
 e. Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
 f. Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
 31. Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
 32. Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
 
Please let me know if I am missing anything there...
 
Cheers,
 
Yogesh

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

What are the config steps for contract hierarchies and vendor hierarchies?

Hi friends
what are the config steps for contract hierarchies and vendor hierarchies?
Regards
Raj Kumar

Contract hierarchies
A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
The top node of the hierarchy cannot have a superordinate contract
Every contract except for the top node has exactly one superordinate contract
Every contract can have none, one, or multiple subordinate contract(s)
A contract can be part of no hierarchy or exactly one hierarchy
Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
Note:
These hierarchy functions should not be reset once they have been activated.
Similiarly you can do this for Vendor Hirerachies.
Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
Thanks

RE: Need Post installation Steps for solution manager4.0 on Windows/oracle

Hello,
Any body having Post installation steps for solution manager4.0 on windows/oracle. Can you please send me to my mail id. Its very helpful.
Id: [email protected]
Thanks,
Regards,
venkat reddy.

Hello Venkat,
You may get the information in SAP Note 918078 and also https://websmp206.sap-ag.de/instguides under the Solution Manager 4.0 tree.
Basically after the installation,
1. try to stop and start the SAP System
2. you need to check if you can access the SAP System.
3. Apply the permanent SAP license
4. Perform the configuration via IMG; Tcode SPRO(guide in https://websmp206.sap-ag.de/instguides)
Hope this could help you.
Regards,
AZLY

Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
Holger

Hi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation steps for EP 7.0

Hi All,
I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
As per the installation guide its said to login as below:
http://<hostname>:50100/irj --> but when i open it, it says The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
Thanks,
Subbu

Hi All,
Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
System Administration--> System Configuration --> Portal Content --> Templates
, and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
I am able to navigate System Administration--> System Configuration but not able to see the option
Portal Content --> Templates
The other point mentioned is:
The system administrator can disable logon by means of the IP address as follows:
Navigate to System Administration --> System Configuration -->
Service Configuration
. i m not able to find the option Service Configuration here??
I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
Thanks,
Subbu

What are post installation steps for SOA 10.1.3.5 patchset on Windows

Similar Messages

Maybe you are looking for