What are provided skin with ADF faces and where i can find more ?

Hi
thank you for reading my post
where i can find more skins for ADF faces ?
I know
Oracle , srdemo
is there any other skins available ?
Thanks

Find your serial number quickly
if it's a win ps cs6 and it's installed, you can use belarc advisor to recover the sn, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

Similar Messages

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long. I purchased a 3 banded AV extension but it doesn't work. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

What is restriction code? And where i can find it?

What is restriction code? And where i can find it?

Settings > General > Restrictions is where you enable a restrictions passcode.
A restrictions passcode prevents access to certain apps or services or features of an iOS device. For example, you can prevent the deleting of any apps, prohibit in-app purchases, etetera. You can restrict the use of Facetime, the Camera, Safari, etc.

What is HMRIC Number in MM Classification and where did we find the same.

Hi,
Please help me in find the below question
What is HMRIC Number in MM Classification and Where did we find it?
Thanks and regards,
Gautam kumar

What is HMRIC Number
First of all, can you tell me what do you mean by HMRIC ??
G. Lakshmipathi

Anyone using facelets with ADF Faces and myfaces implementation?

There is a Howto document for using facelets with ADF Faces, but it assumes you're using Sun's RI. I'd like to use the Apache myfaces implementation of JSF with ADF and facelets, but I keep getting a NoSuchElementException thrown when the pages are accessed.
Here's the error and stack trace:
09:15:18,790 INFO [STDOUT] Jan 19, 2006 9:15:18 AM com.sun.facelets.FaceletViewHandler handleRenderException
SEVERE: Error Rendering View
java.util.NoSuchElementException
     at java.util.AbstractList$Itr.next(AbstractList.java:426)
     at com.sun.facelets.FaceletViewHandler.encodeRecursive(FaceletViewHandler.java:520)
     at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:450)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:352)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:356)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:325)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:190)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
09:15:18,790 INFO [STDOUT] Jan 19, 2006 9:15:18 AM com.sun.facelets.FaceletViewHandler handleRenderException
SEVERE: Took Type: java.io.PrintWriter
I followed Adam Winer's instructions for incorporating ADF with facelets (using Sun's RI) and this works fine. But when I try to swap out the Sun RI for the Apache myfaces 1.1.1 implementation I get the exception.
Here's the info from my web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Facelets</display-name>
<description>Facelets StarterKit</description>
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/applicationContext*.xml</param-value>
</context-param>
<context-param>
<param-name>facelets.REFRESH_PERIOD</param-name>
<param-value>2</param-value>
</context-param>
<context-param>
<param-name>facelets.DEVELOPMENT</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
     <context-param>
          <param-name>javax.faces.DEFAULT_SUFFIX</param-name>
          <param-value>.xhtml</param-value>
     </context-param>
     <context-param>
          <param-name>org.apache.myfaces.ALLOW_JAVASCRIPT</param-name>
          <param-value>true</param-value>
     </context-param>
     <context-param>
          <param-name>org.apache.myfaces.DETECT_JAVASCRIPT</param-name>
          <param-value>false</param-value>
     </context-param>
     <context-param>
          <param-name>org.apache.myfaces.PRETTY_HTML</param-name>
          <param-value>true</param-value>
     </context-param>
     <context-param>
<param-name>oracle.adf.view.faces.ALTERNATE_VIEW_HANDLER</param-name>
     <param-value>com.sun.facelets.FaceletViewHandler</param-value>
     </context-param>
     <filter>
     <filter-name>adfFaces</filter-name>
     <filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
     </filter>
<filter>
          <filter-name>MyFacesExtensionsFilter</filter-name>
          <filter-class>org.apache.myfaces.component.html.util.ExtensionsFilter</filter-class>
     <init-param>
     <param-name>maxFileSize</param-name>
     <param-value>20m</param-value>
     </init-param>
     </filter>
     <filter-mapping>
     <filter-name>adfFaces</filter-name>
     <servlet-name>faces</servlet-name>
     </filter-mapping>
     <filter-mapping>
          <filter-name>MyFacesExtensionsFilter</filter-name>
          <url-pattern>*.jsf</url-pattern>
     </filter-mapping>
<filter-mapping>
<filter-name>MyFacesExtensionsFilter</filter-name>
<url-pattern>/faces/*</url-pattern>
</filter-mapping>
     <listener>
          <listener-class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class>
     </listener>
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<listener>
<listener-class>net.sf.acegisecurity.ui.session.HttpSessionEventPublisher</listener-class>
</listener>

<servlet>
<servlet-name>faces</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
     
     <servlet>
     <servlet-name>resources</servlet-name>
     <servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
     </servlet>

<servlet-mapping>
<servlet-name>faces</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
     <servlet-mapping>
     <servlet-name>faces</servlet-name>
     <url-pattern>/faces/*</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
     <servlet-name>resources</servlet-name>
     <url-pattern>/adf/*</url-pattern>
     </servlet-mapping>
</web-app>
And in my faces-config.xml, I have set it to use the oracle.adf.core render kit:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config>

<application>

<default-render-kit-id>
oracle.adf.core
</default-render-kit-id>
<variable-resolver>org.springframework.web.jsf.DelegatingVariableResolver</variable-resolver>
</application>
<managed-bean>
     <managed-bean-name>keyTable</managed-bean-name>
     <managed-bean-class>example.KeyInfoNodeData</managed-bean-class>
     <managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>
It doesn't seem to matter whether I use <jsp:root xmlns..> tags or <html xmlns ..> tags or whether I use the facelet ui tags or not. I've tried it with several of the ADF components. I always get the pretty facelets exception at the bottom of the page after the ADF component displays.
Am I missing something? Has anyone gotten these three (ADF w/ myfaces impl and facelets) to work together properly?

Hi,
It is supposed to work fine and is working okay, in general, for me. I was setting up a test app yesterday and logged the steps in my blog (http://www.jroller.com/page/mjdenham). I think I logged everything.
Regards
Martin

HT2494 Good afternoon, I have a set of 5 speakers + 1 subwoofer 5.1 from Altec Lansing and I would like to connect the 3 cables - 1 black + 1 yellow + 1 green - to my new i-mac. What connection type do I need? And where I can connect it? BR Pascal

Good afternoon,
I have a set of 5 speakers and 1 subwoofer 5.1 from Altec Lansing and I would like to connect the 3 exit cables - 1 black + 1 green + 1 yellow - to my new i-mac 22" - acquired last week - equipped with only 4 USB 3.0 + 2 Thunderbolt + 1 Ethernet + 1 jack for micro or speaker.
What connector type do I need? And where can I connect ot?
Many thanks in advance for your help
Best regards
Pascal Quennesson

Sorry you cannot
That speaker system is for sound cards on PC's which separate the channels, the Mac's don't seperate the channels or decode surround sound formats and only pass the 5.1 through the dual analog/optical stereo mini port.
You might find a external device that accepts Toslink optical inputs and then separates the channels and sends the appropriate signal to the powered speakers.

What's going on with dynafaces? And where can I contact someone involved?

Hi,
I like dynafaces and its approach to ajax, but I'm a bit worried about the state of the project and whether it has a future. The official mailing list is dead (something like 3 messages in the last month, all from the same guy, all unanswered), and the project doesn't seem to have ever had an actual release, although Ed Burns has been posting release candidates over the past few months. I'd actually like to get involved with dynafaces, but obviously only if it's viable, and isn't about to be made obsolete by JSF 2.0.
Anyone out there know what's going on?
Regards,
Maarten

Hello,
I work on the JSF specification with Ed Burns, and I am specifically working on the Ajax standardization.
We are looking to produce a standard for all JSF/Ajax frameworks to use. This means that all frameworks
will change to accommodate the standard. We have members representing the major JSF/Ajax frameworks
on our Expert Group. Whether you continue to use Dynamic Faces (or not), really depends on your
current needs and time line for a JSF/Ajax solution. If you can afford to wait a bit, then I would go with
the JSF 2.0 implementation.
-roger

What are the coupons for?? and where can I get cheaper .Mac membership

What are those coupons that came with the mechine for??
Not for .Mac??
where can I get cheaper ones.(I live in Canada)
Thanks

They are used for the rare promotion or upgrade offers.
The only time I've ever seen a use for them is when you purchase a computer with a previous version of the Mac OS when a newer version is already available.
You can submit one of the coupons with the upgrade form to obtain the new version at a reduced price.
That's about the only benefit I've ever seen for them.
Apple calls this program something like "Mac OS Up To Date" (something along those lines).
To illustrate, say you purchased an iMac right after OS 10.4 came out, and discovered that the iMac was packaged-up prior to OS 10.4 being available (like it sat on a shelf for a while). So, you've got OS 10.3 installed on it.
Now, you purchased a new computer, obviously you want the latest OS to go with it.
So, because you purchased a new machine with an old OS, you can use the OS Up To Date program to order upgrade disks to OS 10.4 for only $20 or $30 instead of the $129 everyone else pays.
It's not really a fair deal for a person who just purchased a new computer. But, it's better than getting stuck with paying $129.
So, you would fill out the upgrade form, and submit your coupon with it.
The same thing applies to if you purchased the system after the new version of iLife was available. You might be able to get the new version of iLife at a reduced price.
Apple usually runs this program for about 90 days after a new software version is available.
They used to work it the other way:
When I purchased my PowerMac G3 266-DT, they had a program that allowed you to upgrade to the new version of the Mac OS for $19 or $29 (can't remember for sure the $ amount) if it was released within 90 days of you purchasing your computer.
I took advantage of that, and got a reduced-price upgrade to OS 8.5 from OS 8.1.
That method makes more sense to me than the current method.
It makes sense to get a reduced price on updates that arrive up to 90-days from your date of purchase.
But, it is not such a good deal to have to pay for updates that were already available at the time of purchase and should have been included with your new computer. After-all, it's not your fault that the computer sat on the shelf too long.
But, that's how it works now. The coupons basically get you a discount on software updates that were shipping on new systems when you purchased your new computer that had been boxed-up before the new software was released.
As for cheaper .Mac prices, the only options I know of are:
1) You get a $30 discount on it when you purchase a new Mac. So, when you setup the Mac, you are usually presented with an option to sign-up for .Mac with a discount.
2) Amazon sometimes runs a special on it.
3) You might be able to get a .Mac retail box from someone who purchased it and then changed their mind. But, don't buy a box that has been registered already.
Be very careful buying products like .Mac second-hand. There is no way to know that they have not already used the registration code until after you receive it and try to register it yourself.
Hope this helps to answer your question.

HT1414 My ipad is asking for a passcode, neither the password or email address will work for this. where can I findout what a passcode is and where I can find it.

My ipad is asking for a passcode to sign in. Neither the password or email address work. My appleid doesn;t work either. What is a passcode and where can I find it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I'm using an older iMac G5 (PowerPC) with Firefox and MacOs 10.5.8. I no longer am able to watch video clips because Firefox recently auto-updated to 3.6.24; is there an older version of FireFox that would work with my PowerPC, and where do I find it

I used to be able to watch video clips off a streaming website, but it's been getting more difficult and now it no longer works. I suspect that my older Power PC G5 Mac is not compatible with the newer Firefox version of 3.6.24. I suspect that if I used an older version of Firefox with my system, I could get back to watching video clips. Would this work, and if so, where can I download an earler version of Firefox that would be compatible with my Mac and MacOs 10.5.8?

You might want to consider extending the lifespan of your G5 by using a different operating system. I put [https://en.wikipedia.org/wiki/Lubuntu Lubuntu] on a G5 recently and it runs the newest Firefox just fine. Lubuntu (pronounced Loo-boon-two) is sort of an Ubuntu lite - a user-friendly version of Linux. There are many applications to choose from, and it's all free.
The PowerPC I did this on was one of the old Bondi Blue ones. Firefox had no problem running on it at all and has all plug-ins needed for video, audio, etc.. I gave it to a church and it's running fine for them.
You can download old versions of Firefox, but you'll just open yourself up to security problems if you do.
FYI: The Mac operating system is built on Linux.

HT5312 how if i not put rescue email when im first sign up, and where i can find my security question if i forget

i forget put my security email when im first sign up,,
ad where i cand find my pasword or security question if i forget
because it happen to me right now

You can go to https://appleid.apple.com and then check your account information there. The security questions should be under Password and Security. If you click on that, you should be prompted to answer two of the questions you chose and an option to send the answers to your rescue email, if there is one on your account.

Once again Hamchi Red problem please tell what to do and where I can find the information to do it.

Summary report
------------------------Test name: Peer Result: [RED] -> Problems found
Details:Tunnel:
VPN domain's tap device is down
Local results:
Adapter configuration:
Cannot get adapter config
Traffic test: Cannot complete test
Peer results: [167-807-785]
Adapter configuration: OK
Traffic test: Inbound traffic blocked, check firewall settings

I have the same problem. :( Summary report
------------------------Test name: Peer Result: [RED] -> Problems found
Details:Tunnel:
VPN domain's tap device is down
Local results:
Adapter configuration:
Cannot get adapter config
Traffic test: Cannot complete test
Peer results: [182-047-244]
Adapter configuration: OK
Traffic test: OK---------------------------------------------

HT5699 Can anyone provide me with a correct number where I can contact apple team ?

My apple account is disabled im trying to contact apple support , anyone can get me the correct number to contact them thank you

Select the appropriate country:
Apple Support Numbers

Difficulty with ADF Faces/ADF Essentials and Glassfish

Hi all,
I've got a web application written with ADF Faces, and it runs just fine within jDeveloper 11.1.2.3 but when I deploy it to Glassfish 3.1.2 (with ADF Essentials installed) something curious happens.
My application has no difficulty performing database reads, but when it tried to write to the database and commit, it fails.
I've seen only a couple of other people with this problem, and none of them seem to have found a solution - so I'm assuming it's something stupid that I'm doing or misunderstanding.
Here is the log file:
[#|2013-11-10T11:45:17.601-0500|WARNING|glassfish3.1.2|oracle.adf.controller.faces.lifecycle.Utils|_ThreadID=79;_ThreadName=Thread-2;|ADF: Adding the following JSF error message: java.lang.NoClassDefFoundError cannot be cast to java.lang.Exception
java.lang.ClassCastException: java.lang.NoClassDefFoundError cannot be cast to java.lang.Exception
at oracle.jbo.server.BaseSQLBuilderImpl.isSQLRecoverableException(BaseSQLBuilderImpl.java:4575)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3380)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
at app.AppModuleImpl.commitOperation(AppModuleImpl.java:50)
at com.methods.lrc.view.VendorBean.createPaymentReceived(VendorBean.java:509)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.sun.el.parser.AstValue.invoke(AstValue.java:254)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:112)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:130)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:106)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:787)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1252)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:973)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:354)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1550)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
at com.methods.lrc.view.ApplicationSessionExpiryFilter.doFilter(ApplicationSessionExpiryFilter.java:42)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:279)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:655)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:595)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:331)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:231)
at com.sun.enterprise.v3.services.impl.ContainerMapper$AdapterCallable.call(ContainerMapper.java:317)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:724)
Here is the method where it fails:
    public String createPaymentReceived() {
        AppModuleImpl appModule = this.getAppModule();
        ViewObjectImpl paymentReceivedVOI = appModule.getPaymentsReceivedView3();
        Row paymentRow = paymentReceivedVOI.createRow();
        paymentRow.setAttribute("CheckNumber", prCheckNumber);
        paymentRow.setAttribute("PaymAmount", totalSelectedValue);
        paymentRow.setAttribute("PaymentComment", prComment);
        paymentRow.setAttribute("PaymentDate", prPaymentDate);
        paymentRow.setAttribute("PaymentType", prPaymentType);
        paymentRow.setAttribute("TrackId", prTrackId);
        appModule.commitOperation();
        DBSequence paymentsReceivedId = (DBSequence)paymentRow.getAttribute("PaymentsReceivedId");
        Iterator selectionIt = unpaidPaymentItemsTable.getSelectedRowKeys().iterator();
        while (selectionIt.hasNext()) {
            Object rowKey = selectionIt.next();
            unpaidPaymentItemsTable.setRowKey(rowKey);
            int index = unpaidPaymentItemsTable.getRowIndex();
            JUCtrlHierNodeBinding row = (JUCtrlHierNodeBinding)unpaidPaymentItemsTable.getRowData(index);
            Row selectedRow = row.getRow();
            selectedRow.setAttribute("PaymentsReceivedId", paymentsReceivedId.getSequenceNumber());
            selectedRow.setAttribute("PaymentDate", prPaymentDate);
        appModule.commitOperation();
        prCheckNumber = null;
        totalSelectedValue = 0;
        prComment = null;
        prPaymentDate = new Date();
        prTrackId = null;
        prPaymentType = "K";
        refreshTableIterator("VendorPaymentItemsView1Iterator");
        refreshTableIterator("VendorPaymentsReceived1Iterator");
        return null;
it fails on the second appModule.commitOperation() (which I've bolded)
if anyone can give a clue to what I'm misunderstanding I'd really appreciate it. I'm sure that if I had the course for BaseSQLBuilderImpl.java and/or DBTransactionImpl it would be easier to see what the actual error was - unfortunately java.lang.ClassCastException: java.lang.NoClassDefFoundError cannot be cast to java.lang.Exception doesn't tell me much of anything.
Thanks so much to anyone who's got the time/knowledge to help.
Bob

That doesn't seem to make any difference. It works just fine within jDeveloper, but as soon as I deploy it, I can no longer write to the database.
A few more details that seem relevant - it's not only this method that fails. Even on screens which were designed without any backing code (where I used the wizards to create my forms and commit buttons) the same exact thing happens.
I've also replicated this behavior in Tomcat.
Part of what is happening is that something is throwing a NoClassDefFoundError, which is caught by a catch (Throwable thEx) clause within DBTransactionImpl. This passes the Error to a method (isSQLRecoverableException) within the BaseSQLBuilderImpl class. The problem is that this method takes only Exceptions for arguments, and NoClassDefFoundError is not a subclass of Exception (only of Throwable.)
It seems obvious to me that there's somewhere a jar missing, but I cannot find it without knowing which class was not found.

Create dynamic code on a JSF with ADF Faces

Hi,
the next is just sample, nothing to production system, but if I can do the sample I can do something to production system.
Fine.
let's suppose that I want to create a html link
in run-time over a JSF page with ADF Faces component.
I can do that, I did using javascript and Custom tag,
but the html link is placed out of the body of the page instead of put it over the place that I put it in development-time
so, now my question is:
how I can generate dynamic code using ADF FACES component commandButton or any others.
any suggestion??
P.D. if you need more info ask me.

Hello Jeanne.
You are right, I used <f:verbatim> element to wrap all my non-JSF elements and it work. :)
so good so far.
but, dynamic code mean generate code in this case HTML in run-time.
That is to say: write code HTML just in time I invoke a page.
That is posible through Custom Tags.
You create a Custom Tags this tag generate HTML code after to process any Business Logic. then you put the tag in the page that you want to use it
someting like this:
<afh:rowLayout halign="center">
<afh:cellFormat halign="center">
<ESE-utilities:populateMenu/>
</afh:cellFormat>
</afh:rowLayout>
the just above bold line is my Custom Tag that generate HTML code
and not work.
but, if I replace the tag directly using HTML code in the page, for example:
<afh:rowLayout halign="center">
<afh:cellFormat halign="center">
<f:verbatim>
prueba
</f:verbatim>
</afh:cellFormat>
</afh:rowLayout>
it work
so, now my new question is:
Â¿How can I use a Custom Tagthat generate HTML code, and that code have been written inside of my body page?
Thanks in advantage for your reply.
Mauricio

What are provided skin with ADF faces and where i can find more ?

Similar Messages

Maybe you are looking for