What are quick forms? the term is on the control panel of my hp deskjet 3050a eprinter.penny

This question was solved.
View Solution.

QuickForms is a feature that allows the printer to have some functionality without the use of a computer.
You can print calendars, tic-tac-toe games, and Sudoku puzzles just to name a few.
More information, including samples, can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

I am making multiple DVD's of roughly 50 hours of footage on DVD Studio pro with 4 separate menus for 4 different 'parts' or series if you will. 50 hours - 20 episodes - 4 parts of 5 episodes each. What are my options in terms of burning these parts on to

I am making multiple DVD's of roughly 50 hours of footage on DVD Studio pro with 4 separate menus for 4 different 'parts' or series if you will. 50 hours - 20 episodes - 4 parts of 5 episodes each. What are my options in terms of burning these parts on to separate DVD's, what is the process, what size DVD RW should I buy, what bitrate should I use, and what quality I should expect for the burn. Any advice or insight is welcome.

>>What are my options in terms of burning these parts on to separate DVD's<<
20 episodes totaling 50 hours equals about 2.5 hours per episode assuming all episodes have the same duration. Fitting 2.5 hours onto one single layer DVD would require a low bit rate which means quality wouldn't be anywhere near best, but that's a judgement call you'll have to make based on several factors. For example; if there is not much motion in the video (talking heads, etc), you can get by with a lower bit rate and may not notice any quality difference.
>>what is the process>>
The process is essentially the same as it is when authoring a regular DVD with 2 hours or less of content. However, with as many discs as you'd need to complete this "set," you'll need to create a separate DVD Studio Project for each disc. Basically, you'd use one of Compressor's DVD Presets (or customize a preset) to create an MPEG--2 video file (.m2v) and a Dolby Digital audio file (.AC3). Import both of those assets into your DVD Studio Pro project for authoring and burning.
If you want to keep one episode per disc, DVD Studio Pro does have a 150 minute preset or you could use dual-layer discs with a higher bit rate for better quality. Again; your call.
>>what size DVD RW should I buy<<
Size? 12cm. Capacity? Single layer, single sided DVD discs (DVD-5) have a rated capacity of 4.7Gb (4.37Gb actual), including menus. If you use single layer discs and want to keep the quality reasonably good, you'd need at least 50 discs to complete this "set" with each disc holding roughly 2 hours of footage if you keep the menu on each disc simple. Or, you could use dual-layer discs (DVD-9) which have a capacity of about 7.95Gb - almost doubling the recordable capacity. There are also dual-sided, dual-layer discs available (DVD-18) but they are relatively expensive and have to be manually turned over to continue playback ... but they do have roughly 15.9Gb capacity.
>>what bitrate should I use, and what quality I should expect for the burn<<
Exactly; the quality is dependent on the bit rate chosen, as well as the quality of the compression. Using compression markers where needed can greatly increase the quality of playback but will most likely increase the file size of the compressed video. For the best quality, keeping the bit rate as high as possible allowed under the DVD specification will yield the best quality but some DVD players may choke if the bit rate is too high. For best quality I typically aim for a bit rate around 7.6 to 8.0Mbps but that will only allow about one hour of footage.
Naturally, if you decrease the bit rate, you can fit more footage onto the disc but quality will be sacraficed.   Here's a chart approximating DVD bit rates and durations for single layer discs (does not include space for menus):
3.5Mbps - 120 minutes
5.0Mbps -   95 minutes
6.0Mbps -   82 minutes
7.6Mbps -   65 minutes
8.0Mbps -   60 minutes
-DH

What are Smart Forms?

Hi All,
What are smart forms and what's it's use? As a functional consultant, what do i need to know about it?
A User asked me about creating a SmartForm to gather information (from different dept of the business - Finance, Quality, Purchasing...etc) to create a new Material Master.
What is the transaction code for this? Are smart form something like PDF? Can this be saved to desktop and email to people via outlook? Are data input to the form also saved with the form?
Thanks in advance

Hi,
Smartforms are layout sets in SAP.
Transaction Code :SMARTFORMS
As a functional consultant you need to know the standard forms available for different scenarios. If you need to develop a new layout, you need to give layout design and proper logic to ABAPer.
Visit [SAP's online help on Smartforms|http://help.sap.com/saphelp_nw70/helpdata/EN/a5/de6838abce021ae10000009b38f842/content.htm].
You use Smart Forms to create and maintain forms for mass printing in SAP systems. Besides using the printer for standard output you can also select the Internet (by using a generated HTML output), a fax, or e-mail as the output medium.
In addition to the tool, SAP delivers a selection of forms for central business processes. This includes forms in Customer Relationship Management (CRM) as well as in the applications SD, FI, and HR.
Smart Forms offers the following advantages:
-        Creating and maintaining forms requiring half the time
-        Adapting forms without any programming knowledge due to entirely graphical user interface
-        Integrating input elements into the HTML output, which enables you to use a form in Internet applications as well
Also, visit [Introduction to Smartforms|http://www.sap-img.com/smartforms/smart-001.htm].
[SAP Smartforms Tutorial Hints and Tips|http://www.sap-basis-abap.com/sapsf001.htm].
Regards,
Srilatha.

What are views in DDIC and plz mention the difference between them

hi,
What are views in DDIC and plz mention the difference between the different type of views..
1) maintainence view
2)database view
3)Projection view
4)help view
P.S : Good answers will be rewarded with points.

Hi,
The followings are different types of views:
- Database View   (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View    ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View   ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system
Thanks,
Shankar

What are some good visual effects programmes for the Mac?

I have been editing with Final Cut Express since 05 and I want to be able to do fancy visual effects I cannot do with Final Cut Express so I put it to you; what are some good visual effects programmes for the Mac? I know there is Adobe After Effects but I am wondering if there are any others, including from Apple.

Russ H wrote:
Or does it? Because by purchasing Motion, you also get the Pro Res codecs and Animation. Will FCE be able to work with them if they're in your QT library? I think so but am not positive. I'd check with the FCE gurus in that discussion forum.
So I half answered my own question. FCE will respect the alpha channel in a PR 4444 file. But from the limited testing I was able to to, there doesn't seem to be a way to export it ( or other flavors of PR) as a PR sequence. It renders as AIC, which is fine. FWIW, it can always be exported as Pro Res via QT Conversion, but why bother?
However, I now have to say – despite what I said in my first post – that I'm not 100% percent certain that the all the codecs will be available by buying Motion. I'm like 95% sure, the more I think about it. But I have too much NLE and graphics "stuff" on my systems to test it conclusively.
Russ

What are BI reports and ABAP reports and the difference between them ?

What are BI reports and ABAP reports and the difference between them? please explain me in detail and let me know if you have some documentation about it.
Thank you in advance!
Steve Jobs

Do we have to write custom code for the ABAP reports? Do you have any documentation about it?
Thank you.
Steve Jobs

Bing does not appear in add ons or in the search engine list or control panel, in fact there is no reference to it on my computer, yet still, it has hijacked my search and the normally very useful 'highlight, right click, open search in a new tab'

Bing does not appear in add ons or in the search engine list or control panel, in fact there is no reference to it on my computer, yet still, it has hijacked my search and the normally very useful 'highlight, right click, open search in a new tab'

Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. '''(Not all programs detect the same Malware.)'''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/]
AdAware - [http://www.lavasoftusa.com/software/adaware/]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help:
[http://www.spywarewarrior.com/index.php]
[http://forum.aumha.org/]
[http://www.spywareinfoforum.com/]
[http://bleepingcomputer.com]

Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

I have done all the steps that I could find, and I am still having this issue...can someone help me please?
Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D5BEA809F38F28
Current user is an administrator.
The current local date and time is 2014-04-05 12:39:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
IP Address:             192.168.0.16
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:      Yes
DHCP Server:         192.168.0.1
Lease Obtained:     Sat Apr 05 12:21:08 2014
Lease Expires:       Sat Apr 05 13:21:08 2014
DNS Servers:         68.105.28.12
                                68.105.29.12
                                68.105.28.11
Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 17:00:00 1969
Lease Expires:       Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-05 12:38:45.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.0.1
Serial Number:       CCQH8BRSDT77
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

CD Driver Not Available
CD Driver DLL Not Available
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

I installed the latest version of icloud control panel (allegedly Windows 8 compatible) on my Windows 8 laptop. Installation successful, but on clicking on the icloud icon nothing happens. The same software worked on my Windows 7 PC.

I installed the latest version of icloud control panel (allegedly Windows 8 compatible) on my Windows 8 laptop. Installation successful, but on clicking on the icloud icon nothing happens. The same software worked on my Windows 7 PC.

Superb detail, thank you.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook

I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook with duplicate contacts. Is there a solution. Is there selective synchronisation available?

Make sure you don't have any notes that have no content or subject or this can prevent syncing with Outlook. If you do, delete them.
If you don't, try unchecking "Mail,Contacts,Calendars & Tasks with Outlook" on the iCloud control panel for Windows, choose Delete at the prompt (the data will still be in iCloud), restart your PC, then go back and check this setting again. (Your iCloud data will reappear in Outlook after a brief delay as it redownloads.)
Then create a new note on one of your iOS devices and see if it appears in the Notes folder in Outlook mail after a few minutes.

What are interactive form fields

I found a sample template online that I would like to use, I saved it in my documents and now I can not edit it, what do I need to do?

Hi ,
Referring to the following document you could more information about form fields.It will cover everything related to interactive form fields.Please have a look .
http://www.adobe.com/content/dam/Adobe/en/accessibility/products/acrobat/pdfs/acrobat-xi-a ccessible-forms.pdf
As far the template is concerned ,please explain more about that .
What kind of template it is ?
How do you want to edit it and what are the challenges are you facing while trying to edit it ?
What version of Acrobat are you using?
Also ,what OS do you work on ?
Please provide us the mentioned information so that we can assist accordingly .
Regards
Sukrit Dhingra

(MacBook / No FireWire) What are people here going to do down the line ?

I hope not to turn this into a rant about the new MacBooks. Rather I just wanted the musicians side of things...
I know that there is lots of talk in the MacBook forums about the new MacBook's lack of FireWire but as a fellow musician I was hoping to get other musician's (Logic Pro 8 users) perspective on the situation.
I've been using my iMac for about 5 years and I was planning to purchase my 1st MacBook in January and retire the iMac to other non-music chores.
Why? .....my wife bought herself an iMac about a year ago (Nov 2007) and I've fallen in love with her computer. I have not loaded Logic 8 on her machine but I have used GarageBand on it and it works great so I would assume I would get good performance on it with Logic 8.
But, now that the new MacBooks don't have FireWire and my connections (audio, hard disks, video cameras etc.) to my iMac via FireWire, I've decided not to buy a new MacBook.
options
1. I still like doing music on my iMac. Maybe I'll just keep it as my music computer
2. Ask my wife to trade? (not going to happen)
3. Buy a MacBook Pro? Thats a lot of extra money that if I had I would rather spend on something that would make my music really "sound" better (better mic, better Guitar, better mic preamp etc). After all, those things will last forever, a computer has a limited lifespan.
4. Switch to a USB interface and get the new MacBook? I have a FireBox interface now that I really like although I have been using a external mic preamp that made my audio sound quite a bit better.
What would you all do? Or better, what WILL you do when it comes time for you to need a new notebook computer with FireWire.
ideas?

This is a good thread with information that may be useful to you:
http://discussions.apple.com/thread.jspa?threadID=1802741
With all due respect to Marceldada, I would not recommend buying one of those white macbooks. Although they price is right, you want to get the best and fastest machine you possibly can, or you are going to have performance issues with Logic and grow out of the machine sooner. The newest model 'unibody' 2.1ghz Macbook actually gets faster benchmarks than the 2.4ghz previous generation Macbook (yes, I typed that in right, the 2.1 is FASTER than the previous gen 2.4), so that white previous generation 2.1 Macbook they're still selling on the MB page is going to be significantly slower than any other Mac laptop you can get now.
I'm not totally convinced that USB is terrible for Audio interfaces - there seem to be some nice ones out there if you just want something with a couple of ins and outs. Get a 7200 speed internal HD, and you can record several tracks of audio onto that with no problems.
If you're wanting to do really heavy Logic work and lots of multi track recording, you should spring for the MBP anyway. The Macbook Pro's are amazing machines, and that 2 inches more on the screen in my opinion is worth its weight in gold. Also keep in mind that you will recoup some of the added expense that you put into a newer and better spec'd machine when you resell it. Even if you bought one of the black or white Macbooks brand new now, the silver one will still hold its value better because it is newer technology. And that certainly holds true for the MBP's too. The more you spend now, the more it will be worth when you sell.
If you do want firewire and definitely don't want a MBP, I would look at the refurbished and clearance machines on Apple's website, or check out some Apple retail stores who may still have some of the older black and white Macbooks they're trying to get rid of.
http://store.apple.com/us/browse/home/specialdeals/mac?mco=MTMzNTY
I think getting a refurbished or clearance model 2.4 black or white Macbook (or a refurbed previous generation Macbook Pro, which you can get for cheaper than the current silver Macbook) is a much better deal than the low end whitebook they're still selling new. If there is a university near you, check out their bookstore. I was just in a university bookstore two days ago, and the were selling the 2.4ghz blackbook for $999, and the 2.4 whitebook for $949. That's cheap, and a pretty fast machine!
Good Luck!

What are default adpters in ABAP stack in the Integration engine

Hi, May I know the what are the default adapters in ABAP stack and in Intergation engine. One I know is IDOC, which we dont need to configure as outbound, whats others.
Thanks

Hi,
also sender http adapter can be found on abap stack
all the rest have to be configured on the java stack
Regards,
michal

What are some ways to remove shine from the face in portraits?

What are some different methods that people use to remove shine from the face while still leaving enough for a subtle highlight? I would love to hear all the different options I have. Thanks!

Here is one:
Open a blank layer above the background layer
Access the Clone Stamp Tool.
On the tool's option bar, enter Mode: Darken Opacity: 30% Aligned: Checked Sample all layers: checked
Zoom in on the shiny area, then ALT+left click a non-shiny skin area to sample the skin. Now, paint over the shiny area

What are little transparent notices that pop onto the screen?

There are little transparent notices that pop onto the screen whenever the computer congratulates itself for doing something like a download or finding an infected email and eliminating it. What are those called and how can I turn them off?

Thanks for replying MacJack,
It turns out that it was Growl, not an anti-virus program that was being the nuisance.
I found out how to disable those distracting pop-ups by following the directions on Growl's website.
http://growl.info/documentation/growl-package-removal.php

What are quick forms? the term is on the control panel of my hp deskjet 3050a eprinter.penny

Similar Messages

Maybe you are looking for