What are SCMRWBS and SCMEMWCL for ?
Hello all,
I'm now filling the installation parameter sheet of SCM(APO) system.
This sheet has two paraemters whose content I'm not sure of.
That is, software units SCMRWBS and SCMEMWCL.
What are SCMRWBS and SCMEMWCL for ?
Do we need to install them while my project will use PP/DS and BP modules ?
And can we see whether these usage types installed or not via SAPGUI ?
I beg your help !
Thank you for your cooperation in advance.
Regards,
Hi Hideki,
SCMRWBS is for SCM Replenishment Workbench. If you are using F&R modules of mySAP SCM suite, then this component is neccessary.
Smilarly, SCMEMWCL is SCM Web Communication Layer for Event Management. Again this is part of mySAP SCM, but belongs to Event Management module.
As far as PP/DS is concerned these two components are not neccessary. However, these components may have some dependencies on other applications / modules. Please check with SAP for any specific inputs if you have any concern over installing them onto your system.
Thanks,
Rajesh
>
Hideki Kozai wrote:
> Hello all,
>
> I'm now filling the installation parameter sheet of SCM(APO) system.
> This sheet has two paraemters whose content I'm not sure of.
> That is, software units SCMRWBS and SCMEMWCL.
> What are SCMRWBS and SCMEMWCL for ?
> Do we need to install them while my project will use PP/DS and BP modules ?
> And can we see whether these usage types installed or not via SAPGUI ?
>
> I beg your help !
>
> Thank you for your cooperation in advance.
>
> Regards,
Similar Messages
-
What are advantage and disadvantage for Physical Standy and Logical Standby
HI,
What are advantage and disadvantage for Physical Standy and Logical Standby configuration?
Thanks
KenLogical standby database
The key advantage for logical standby databases is that they're opened read/write, even while they're in
applied mode. That is, they can be used to generate reports and the like. It is indeed a fully functional
database. Also, additional indexes, materialized views and so on can be created.
However (this being a disadvantage) not all datatypes are supported.
Oracle (or more exactly the log apply services) uses the primary database's redo log, transforms them into
SQL statements and replays them on the logical standby database.
Physical standby database
A physical standby database is a byte for byte exact copy of the primary database. This also means that
rowids stay the same in a physical standby database environment.
Oracle (or more exactly the log apply services) uses the primary database's redo log to recover the
physical database.
A physical standby database might be opened read only; however, the received logs are in this case not
applied. When the logs are applied, the database is not accessible (it is then in a managed recovery state).
Regards, -
What are username and password for BPEL Console of BPEL Process Manager 10g
There was no hint for setting the username and password during installation.
HELP!!After installation of BPEL Process Manager .I can enter the BPEL admin page ,but not BPEL console page the http://192.168.1.100:9700/BPELConsole/j_security_check for the invalid default name and pass,neither bpeladmin nor oc4jadmin could be checked at all.
While,the BPEL PM SERVER console replyed me some messages like:invalid authorization method,should be CUSTOM_AUTH,but find FORM and realmLoginModule authentication failed
I need your help!really!!please!!thank you all!!!!! -
What are PROVIDER_URL and INITIAL_CONTEXT_FACTORY for Sun iMQ
Hi
Thank you for reading my post
I am trying to use sun MQ from outside the application server from an standalone client .
i want to access to some queue and process its message from the standalone client , but where ever i searched i can not find those two parameters , can some one give them to me ?
I need them to initiate the Context objectInitial context factory is generally:
com.sun.jndi.ldap.LdapCtxFactory
URL depends on how you set up your object hierarchy. e.g. It might look something like:
"LDAP://myhost.mycompany.com:15200/ou=AdministeredObjects,ou=MessageQueue,dc=sfbay,dc=sun,dc=com"; -
What are "A1" and "A2" in Tree SQL?
ApEx generates something like the following for trees. What are "A1" and "A2" for?
select "EMPLOYEE_ID" id,
"MANAGER_ID" pid,
"LAST_NAME" name,
'f?p=&APP_ID.:4:&SESSION.::NO::P4_COUNTRY_ID:'||"EMPLOYEE_ID" link,
null a1,
null a2
from "#OWNER#"."EMPLOYEES"MikePosted the above question thru guest login... posting again to track it..
How do i refer to the values of A1 and A2 in javascript in the <SCRIPT> tag?
Also if i want to compare the value of A1 to a value in a Hidden field using javascript code. How do i do it? -
How to find out what are the interfaces used for Job and Job Codes
HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
SunnyHi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss
What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelpHi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM -
What are the classes used for bropdownListBox in BSP and purpose and how
what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar ShuklaBenje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments -
What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.
Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0) -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What are the optimal values for mac and arp timeout values
Hi Guys.
What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
- single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
- and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
or for asa 5520 as internet gateway for 500 clients?
I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
Is this o.k.?
Thanks.Marvel.
As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no. The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
-Tom
Please mark answered for helpful posts -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
Satellite A100-153: What are verical and horizontal refresh rates for my display
How can I found out what are verical and horizontal refresh rates for my display?
Hi
Do you mean the vertical and horizontal display resolution???
Anyway all informations should be listed in the user manual.
I dont know exactly what appendix is it but it must be placed somewhere at the end of the user manual.
Such infos are listed also in my user manual which was delivered and preinstalled on my Satellite notebook. -
In preferences- saved passwords for Chrome://weave (Mozilla Services password) and Mozilla Services Encription Passphrase) what are these and are they needed?
They are only needed for firefox sync.
-
What are these and what are they useful for?: and
I have seen these symbols being used in Java: << and >>, what are they and what do they do?
Thank you.As DrQuincy asks how is this of use over multiplying
and dividing?In your processor there are often different instructions for shifting, multiplying, and deleteing. Typically the shifting instructions take less time to execute and so using the shifting operator will be faster than multiplying. This assumes the compiler doesn't recognize the situation and optimize it out though.
The >>,<<,>>>, &,|,and ^ operators are mainly useful when you need to deal with individual bits of data. For instance if you are talking to another system (thats not java) that uses a different method of storing numbers (little endian/big endian etc.), or doing something such as creating parity data for error correction. There are lots of things to do, but most a low level and its rare when you need to use them.
Maybe you are looking for
-
Two iPhones and two iTunes accounts on one computer
My wife and I both have identical iPhones and my wife wants to give her laptop to my son. I thought that I could manage her iPhone from the same computer that I manage my iPhone from but I am having issues. If I logout of iTunes and login with her ID
-
How to download the entire creative suite
how to download the entire creative suite cs6 design suite and web premium from download center?
-
Has anyone ever imported a song from Itunes and deleted the first part of the song so that it starts at a certain location?
-
How to hide or change TCP/IP fingerprint?
After executing 'nmap -O -A 127.0.0.1', it returns some lines starting with 'OS:'. How to change it?
-
Itunes need to install component (-42404) on Mac OSX version 10.4.11
To be able to make a purchase on Itunes I am receiving a message that I need to have installed component (-42404) on my Mac OSX 10,4,11. How do I do this?