What are smart mailboxes and why do i need both smart and "normal" ones?

What are smart mailboxes and why do I need both smart and "normal" mailboxes?

Hi Kingoftypos,
Thanks for that clarification. So, now it appears that the ultimate purpose of a Smart Mailbox is to point to all emails that meet the criteria in a single place, so if they are spread among several mailboxes, you will be able to see them all together. Here is an article from Apple that describes it:
A Smart Mailbox displays in one location messages that are stored in other mailboxes, so you don’t have to move messages between mailboxes. The messages displayed by a Smart Mailbox are based on criteria you define, and are automatically updated to include new messages that match your criteria. For example, you might create a Smart Mailbox that displays all messages found in all mailboxes from a specific sender.
If you change a message in a Smart Mailbox, such as marking the message as read or unread, or moving or deleting the message, the change is reflected in the mailbox where the message is actually stored.
So, adam, I would think that, if you had mail going to a lot of different places, and wanted to be able to see a particular set of those in a single place, you would use a smart mailbox. Maybe use the rules to direct your mail to different places to start with, but a smart mailbox to bring a set of common ones all together into a single smart mailbox?
Maybe you have Rules move your Amazon mail to an Amazon folder and your Apple mail to an Apple folder, but then you have a Smart Mailbox that contains any mail that has the word "Receipt" in the Subject line?
Just a thought....
Cheers,
GB

Similar Messages

  • What are best practices for managing my iphone from both work and home computers?

    What are best practices for managing my iphone from both work and home computers?

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans withiTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
    tt2

  • What are Layers? And why do I need them?

    WHAT ARE LAYERS? AND WHY DO I NEED THEM?
    Layers are an essential part of Photoshop. With Layers you can separate pictures or design elements from each other, as if they are stacked on pieces of glass. With all elements separate, you can move or change them independent of each other.
    Layers are used for many tasks, including improving your images' color or tone; merging two or more images in one Photoshop file; and creating Web designs and animations.
    LAYER BASICS - VIDEO 06:41 min.
    WORKING WITH LAYERS - VIDEO 11:16 min.
    KEY CONCEPT: LAYER
    PHOTOSHOP/ LAYERS BASICS - Reference Guide

    After creating the mask and applying adjustment, you can also adjust and change layer mask using selection tools or, the most common way, using brush tools.
    To have a more accurate preview of what are you doing, Alt + click on the layer mask thumbnail to show the mask in the image area.
    At this point, you will have a layer mask on your screen in large view, so it is easy to fine tune it, but you wont see how that affects your image.
    To seean  instant preview how changes on layer mask affects the adjustments, use New Window for (name of your image) from Window > Arrange.
    Here is a more detailed tutorial on the topic: New Window for.. Command in Adobe Photoshop.

  • Query as Web Services!!! What are its uses and why do we need it?

    What are its uses and why do we need it.. if other tools like Dashboard and crystal reports and Webi can connect to universe and create reports and Analytics...

    Hello  Rajsan Madhavarajan  
    Query as a Web Service (QaaWS) is a SAP Business Objects (BOBJ)  client-side tool that allows users to create and publish Web Services that can be made available over the Web.  Once these web services are created and published,  they can be consumed like any other standard Web Service in software applications including Xcelsius and Crystal Reports.   But first we have to understand what exactly is a Web Service.
    Web Service
    A Web Service is a software system that supports  interoperable interaction over a network from one computer or machine to another but is more commonly defined as a client and a server communicating data over the Web using the HTTP Protocol. Using Web Services along with Business Objects allows a live connection of data to be used in applications such as Xcelsius and Crystal Reports through a semantic layer called a Universe.
    Query as a Web Service (QaaWS)
    The two main components in QaaWS are the Client Tool and the Server.  The QaaWS Client Tool gives the end user an easy to use wizard that allows them to create Universe queries and publish them as Web Services.  Once the QaaWS is published, any user can securely access the data that the Web Service contains as long as they have access to that server. Have a look on  image below that shows the information flow to and from the server via the client.
    Advantages to QaaWS:
    Very easy to use and intuitive interface Familiar look and feel for people who have used Web Intelligence
    Leverages existing Business Objects Universes Shares metadata with Web Intelligence, Desktop Intelligence and Crystal Reports
    Maintains Business Objects Enterprise Security
    Allows live data feeds to be incorporated into Xcelsius Dashboards and Crystal Reports

  • HT201250 What is Airport Utility and why do I need to access this in order to backup my iMac using Time Machine...PLEASE??

    What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??

    AirPort Utility is required to configure an Apple AirPort Base Station or Time Capsule.
    Time Machine can use a Time Capsule or a locally connected volume. You only need to use AirPort Utility if you are using a Time Capsule.

  • What is a url and why is it needed to use photoshop

    What is a URL and why do I need it to use photoshop on my computer?

    what problem are you seeing?

  • What are the possible reasons why this R3 info not getting to BW?

    Hi,
    I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
    1. What are the possible ways to troubleshoot this?
    2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
    3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
    4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
    Please provide the necessary to tcode in all the discussions
    Thanks

    1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
    1.  If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
    2. If it is Part of Transactional Data, Check in your RSA3, PSA.
    How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
    Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
    If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
    case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
    case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
    Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
    Nagesh Ganisetti.
    Assign points if it helps.

  • What are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

    what are all the reasons why imessages turn into text messages...such as the recipient is talking on the phone, etc.?

    Hi,
    What's the worst that I've spent 100 Eur alltogether for GPS map based applications for several sports - golf, bike, ski, etc. These applications use data from iPhone Map application and its disaster after my update onto iOS 6. These are pictures of 2 of my favorit golf resorts:
    And here one example from a place where I use to bike:
    Very nice, isn't it?
    And unfortunately this problem won't disappear even when Google put stand alone map application into iStore.
    So I have only way to downgrade to 5.1.1 immediately to not throw away money I already spent.
    Ivan

  • My mac won't read my external harddrive's videos that I took with my Nikon.  Half the videos won't play, and those are .avi files.  WHY won't they play anymore and how can i retrieve them?

    My mac won't read my external harddrive's videos that I took with my Nikon.  Half the videos won't play, and those are .avi files.  WHY won't they play anymore and how can i retrieve them?

    What exactly is your problem? Is it, (a) your Mac doesn't read your external disk, or, (b) you can't retrieve your videos, or, (c) you can't play them, or, (d) you were able to play them at one point, but not any more.
    What version of Mac OS X are you using, what app are you trying to play your videos with, what happens when you do, and what error messages, if any, do you get?

  • Keynote and pages are now free, but why do i need to pay for them still when there now free?!?

    keynote and pages are now free, but why do i need to pay for them still when there now free?!?

    Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
    Older Mac purchases require a paid purchase of these applications.

  • What is 'Growl' and why do I need it?

    My system keeps telling me to install GROWL.
    What is it and why do I need it?
    Harold

    Growl is a third party utiltiy for manipulating parts of the OS and displaying "notifications". It sounds like you once had it installed. To remove go here...
    http://growl.info/documentation/growl-package-removal.php
    EDIT: It's not your system telling you, it's a Growl notification.
    -mj
    Message was edited by: macjack

  • What are the difference in transaction codes in 4.6 C and ECC 6.0 HCM syste

    Hi
    What are the difference in transaction codes in 4.6 C and ECC 6.0 in HCM SAP.
    Regards,
    Sanjay

    Believe there will not be any change in Tcodes.
    check these links
    http://solutionbrowser.erp.sap.fmpmedia.com/
    http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
    http://service.sap.com/releasenotes
    http://service.sap.com/upgrade for functional
    https://websmp105.sap-ag.de/upgrade

  • What are the proper print settings to print two sides, landscape and bind on the short side?

    what are the proper print settings to print two sides, landscape and bind on the short side?

    This is a question best asked in the appropriate product forum.

  • What are the endpoints attributes collected by NAC Profiler through SNMP and DHCP?

    Hi Everyone,
    Please help on this.
    I want to know what are the endpoints attributes collected by NAC Profiler to discover and profile the endpoints.through SNMP protocol and DHCP protocol.
    Also if anybody can explain a simple used case on this.
    Please guide me on this.
    Thanks in advance.
    Thanks,
    Abuzar.

    Hi,
    SNMP
    =====
    NetMap queries network devices via SNMP for:
    System information
    Interface information
    Bridge information
    802.1X information (PAE MIB)
    Routing/IP information
    CDP MIB Information
    This information is used to Build and maintain a model of the network topology and endpoint discovery.
    NetMap uses SNMP Get, GetNext and GetBulk (when available) requests to  query the SNMP agents running on the network infrastructure devices to  gather specific Management Information Base (MIB) objects about their  status based on device type (Layer 2 or Layer 3).
    In addition to polling each network device for all MIB data at a regular  interval, NetMap may also be commanded to poll port-specific  information when the NAC Profiler system is notified that an endpoint  has joined or left the network via SNMP traps sent by devices at the  network edge, switches typically.
    Upon receipt and verification of a link state (link up, link down) or  MAC notification trap, NetTrap will notify the NAC Profiler Server that a  change has occurred on the network edge (endpoint joined or left a  network port). If the trapping device is in the NAC Profiler  configuration, the NetMap component module assigned to poll the device  that sent the trap will be commanded by the Server module to initiate a  poll of the device's port information to determine the change to the  endpoint topology that resulted in the trap being sent by the network  device.
    The information gathered by NetMap is processed by the Server  accordingly to update the network topology, noting the endpoint joining  or leaving a port. Note that NetMap SNMP polling of network devices  resulting from a trap is localized to the port specified in the trap.  This is unlike the regular polling that occurs at the frequency  specified for each device type (L2 and L3) which gathers all SNMP  information from the device used by the NAC Profiler system.
    DHCP:
    =====
    The NetWatch module listens for traffic including DHCP traffic.
    The module will collect all the DHCP information on the traffic collected, like mac address, ip address,  DHCP Vendor Class Identifier in DHCP request, host name in DHCP request, requested specified options in DHCP request (option 55) and full list of DHCP options supported by the DHCP client as specified in the DHCP request.
    All the endpointe data can then be used to map endpoints with profiles.
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

    What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

    If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
    Exactly what screen are you at on your iPhone?  It sounds like it is in Activation Lock.

Maybe you are looking for