What are the "Add to Loop Library" requirements for creating automatically conforming loops?

I am trying to create my own loops that conform to the tempo and key of a song. I have made several loops in this way by selecting a region that is exactly 4 bars, for example, and then selecting "Add to Loop Library". If the sample is cut correctly, the "Type:" field is enabled which allows you to make it a Loop and therefore have it automatically conform to the song tempo.
In the past I have made loops that were very long, up to 128 beats, for the purpose of making mashups using instrumental tracks that I want to conform to the song. I now can't seem to create a large loop but I am not sure why. I know it is possible, but I don't know the steps I took to get there.
What are the exact requirements that allow a loop to be added to the loop library while also conforming to song key and tempo?

In the past I have made loops that were very long, up to 128 beats
The longest loop I managed to save as "Loop" had 55 measures (220 beats, 203 bpm). Longer loops could only be saved as "One shot". And the loop had to be cut at the end, not simply be trimmed by dragging the end of the region. The tempo matters; for a slow song the loop can only have fewer measures.

Similar Messages

  • What are the supported Platforms and system requirements for JSE?

    What are the supported Platforms and system requirements for JSE?

    Hi There,
    The following are the system requirements & the support platforms for JSE :-
    * Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
    o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
    o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
    * Solaris 9 Operating System (x86 Platform Edition)
    o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
    o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
    * Windows 2000 and Windows XP
    o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
    o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

  • What are the disc space and memory requirements for the apps?

    What are the disc-space and memory requirements to run the apps

    Hello John!
    thank you for the info. However, as I have only 1Gb memory and a 32Gb
    solid-state disc, I think that I will stay with Acrobate.com for a while
    longer.
    Regards
    Brianb

  • What are the minimum db user privileges required for CDC?

    What are the minimum privileges required for the source data server user in order to to successfully implement CDC
    Currently I'm getting an "Insufficient privileges" error when trying to start a CDC journal on a model. The error is happening on the step that creates a trigger on the table in the source schema.
    Here's the situation:
    The data server uses the user "ODI_TEMP" for its connection. ODI_TEMP has been granted select privileges on the desired tables in the source schema. When starting the CDC journal on the model for the source schema, ODI tries to create a trigger on the source tables. This fails since the ODI_TEMP user can't create triggers on anything outside of it's own schema. For obvious fundamental security reasons, we cannot give the ODI_TEMP user the CREATE ANY TRIGGER system privilege on the data source.
    Journalizing is set up using JKM Oracle Consistent. ODI is 11g, DB is 11g.

    Hi,
    You can go for this
    Grant CREATE ANY TRIGGER system privilege to ODI_TMP
    Start the Journal , it will create triggers in ODI_TMP schema for the tables present in your source schema.
    Now revoke CREATE ANY TRIGGER system privilege from ODI_TMP.
    It will continue to work .. only when you are restarting the journal (due to adding or removing some tables in CDC) , you will be requiring CREATE ANY TRIGGER privilege.
    Thanks,
    Sutirtha

  • What are the minimum CPU and Memory requirements for R12 Vision instance?

    We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
    We aleady know how much disk space it will need.
    Dan

    Hi,
    See these links.
    A Primer on Hardware Sizing for Oracle E-Business Suite
    http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
    What Are the Minimum Desktop Requirements for EBS?
    http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
    Also, please see old threads for similar discussion.
    Hardware Requirements
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Benchmark
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • What are the components & support package levels required in 4.7 to extract

    Hi All,
    In my landscape we have ECC 6.0 and 4.7EE, as of now we are extracting data from ECC 6.0 to BI 7.0.Now we have requirement to extract data from 4.7EE.
    Could you please suggest me what are the components & support package levels required in 4.7 to extract data from BI 7.0 
    i am copying current compnents and support package level below
    SAP_BASIS            620        | 0065  | SAPKB62065           | SAP Basis Component                                         |
    SAP_ABA              620        | 0065  | SAPKA62065           | Cross-Application Component                                 |
    SAP_APPL             470        | 0025  | SAPKH47025           | Logistics and Accounting                                    |
    SAP_HR                 470        | 0113  | SAPKE470B3           | Human Resources             
    ABA_PLUS            | 100        | 0009  | SAPKGPBA09           | PLUGIN ZU ABA_PLUS                                          |
    EA-IPPE                  200        | 0013  | SAPKGPIB13           | EA-IPPE 200 : Add-On Installation                           |
    PI                   | 2004_1_470 | 0001  | SAPKIPZI51           | R/3 Plug-In (PI) 2004.1 for R/3 Enterpri                    |
    PI_BASIS             | 2004_1_620 | 0003  | SAPKIPYI53           | Basis Plug-In (PI_BASIS) 2004_1_620                         |
    ST-PI                | 2008_1_620 | 0000  |      -               | SAP Solution Tools Plug-In                                  |
    EA-APPL              | 200        | 0007  | SAPKGPAB07           | SAP R/3 Enterprise PLM, SCM, Financials                     |
    EA-DFPS              | 200        | 0007  | SAPKGPDB07           | SAP R/3 ENTERPRISE DFPS                                     |
    EA-FINSERV           | 200        | 0007  | SAPKGPFB07           | SAP R/3 Enterprise Financial Services                       |
    EA-GLTRADE           | 200        | 0007  | SAPKGPGB07           | SAP R/3 Enterprise Global Trade                             |
    EA-HR                | 200        | 0011  | SAPKGPHB11           | SAP R/3 Enterprise HR Extension                             |
    EA-PS                | 200        | 0007  | SAPKGPPB07           | SAP R/3 Enterprise Public Services                          |
    EA-RETAIL            | 200        | 0007  | SAPKGPRB07           | SAP R/3 Enterprise Retail            
    Thanks & regards
    Mani.
    Edited by: manohar kumar on Nov 18, 2010 7:36 AM

    Hi,
    As far as my view there is no  such dependancy as our customers are running  in same Environemnt (R/3 4.7 EE and BI 7.0) .
    Are you facing any problem durng extraction or its just a proactive approarch .
    I hope extraction will work with your current landscape.
    Regards,

  • What are the steps to make it seamless for a customer to use the install program and then use the installed program?

    I wrote an install program (.exe) that is downloaded from a website.  When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory.  When I run, the installed program works.
    What are the steps to make it seamless for a customer to use the install program and then use the installed program? 
    bhs67

    This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer. 
    Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield."  Where do I find info that describes the differences between the "free" and the "full"
    versions?
    bhs67
    Hello,
    The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
    In addition, as this thread
    InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
    at the following forum to get supports about InstallShield.
    http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

    With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

    Gary Krouse
    We will customize a very detailed reply, but
    (a) What are the properties of your source media?
    (b) What did you or the program set as the project preset to match the properties of the source media?
    (c) What specific requirements do you have for this H.264.mov export file?
    File size can be a compromise between bitrate, file size, and quality.
    Thanks.
    ATR

  • What are the Non SAP data sources supported for Analysis workbooks?

    AO 1.4 SP6
    BO 4.1 SP2
    What are the Non SAP data sources supported for Analysis workbooks?
    Thanks.

    HANA is a data source (which could contain non-SAP data)
    For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

  • What are the settings in i phone 4s for connecting internet in mobile data ?

    what are the settings in i phone 4s for connecting internet in mobile data ?

    Did you ever get a reply to this.  I have the same problem.  I have the same problem when even when I reply to an email... no photo shows up in my new reply message.  The only way I have figured out is to use the "forward" option.
    But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of.  Instead of a photo... there is a <photo name of some sort>.
    Let me know if you ever hear on this one.
    Many thanks.

  • What are the different types of Wage types for Indian Payroll...??

    Dear Frnds,
    What are the different types of Wage types for Indian Payroll that we have to configure it...?? and please list wage types that we have to configure it for different types of TAX and Allowances in India payroll.
    And also please list Info types numbers for different types of TAX and Allowances.
    Many thanks in advance.
    Regards
    Ahmed.

    for the list of the wage types you can check V_512W_D for country grouping 40 Inida
    for Tax related info please search the forum or search google you will get lot of inputs

  • What are the delta mechanisms and tables used for  Lo Extraction & COPA

    Hi all
    what are the delta mechanisms and tables used for  Lo Extraction & COPA.
    please explain clealry.
    Thanks & Regards,
    James

    James,
    Please go through Roberto's weblog :
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    Anyways,
    As you know LO cockpit consists of different modules(MM, PP, SD, etc)
    They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
    coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
    Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
    Assign points if helpful
    Kalyan

  • What are the BEST Books and Best websites for java biginners?

    Dear All,
    What are the BEST Books and Best websites for java biginners-Especially for fast learning.
    Thnaks
    KMK

    This is my standard reply:
    [Sun's basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
    [Sun's New To Java Center|http://java.sun.com/learning/new2java/index.html]
    Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
    jGuru
    A general Java resource site. Includes FAQs, forums, courses, more.
    JavaRanch
    To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
    [Yawmarks List|http://forums.devshed.com/java-help-9/resources-for-learning-java-249225.html]
    [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance]
    [http://javaalmanac.com|http://javaalmanac.com]
    Bruce Eckel's [Thinking in Java(Available online.)|http://mindview.net/Books/DownloadSites]
    Joshua Bloch's [Effective Java|http://www.amazon.co.uk/exec/obidos/Author=Bloch,%20Josh]
    Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance ]
    James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]
    Gosling is the creator of Java. It doesn't get much more authoritative than this.
    Joshua Bloch and Neal Gafter [Java Puzzlers.|http://www.javapuzzlers.com/]

  • What are the main instruction followed  in flatfile for hierarchy

    what are the main instruction followed  in flatfile for hierarchy

    Hi,
    If you want to load InfoObjects in hierarchy form, you have to activate the indicator With Hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the entire hierarchy or the hierarchy structure is to be time-dependent, whether intervals are permitted in the hierarchy, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
    The detailed procedure is listed in the link below
    http://help.sap.com/saphelp_bw33/helpdata/en/b0/ab8e3cb4340b14e10000000a114084/frameset.htm
    Remya

  • What are the naming conventions we should follow while creating an object

    hi
    what are the naming conventions we should follow while creating an object in ABAP dictionary, i.e while creating zee table.

    Hi,
    Namespaces and Naming Conventions
    SAP has reserved name ranges for customer objects and SAP objects. Use these customer name ranges to make sure that your objects are not overwritten by SAP objects during the import of corrections or an upgrade.
    This documentation lists the customer name ranges for the different system objects.
    Only use the customer name ranges. If you do not keep to the name ranges for customer objects you may lose your development objects.
    SAP delivers a few system objects with names that fall within the customer name range. These objects already existed when the customer name range was extended from YY/ZZ to Y/Z. These objects are listed in table TDKZ.
    Regards

Maybe you are looking for