What are the advancements made in the iCloud

What are the advancements made in the iCloud offering in the last 3 years?

Read http://en.wikipedia.org/wiki/ICloud

Similar Messages

How to view what are all programs maped with the event....

I am new to this events concept - could you please say
in SM64 we can give Event....
<b>How to view what are all programs maped with the event..</b>
Thanks in advance.

Hi Sam,
See these links:
How-to trigger a process chain using ABAP?
Re: scheduling process chain 3 specific times a day
NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
Hope this helps.
concerning to sm64 ..
Triggering events manually ...
Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
example : JOB_OPEN to create a background job..
When scheduling a background job, you can specify it to start "after event".
If you do so, you'll have to create an event in SM62.
If a job is scheduled after event event and you trigger the event with SM64, the job will start.
Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
Reward if helpful.
Regards,
Harini.S

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

On my mini ipad, I cleared the cookies/histories in the safari setting. But what does the advance-setting of the clearing the website data does? What's that used for? Thank you!

On my mini ipad, when I'm on the internet -- a few times I will see a blue small pop-up boxes telling me to allow down/load or add something like the bubble-splash game or something similar. I jusr click ignore and it goes away.. I'm not sure why it's showing up lately.. I'm not sure if it's a virus or hacked in or a web brower matter..
Should I go to the cookies/histories in the safari setting and have it cleared out? Will that help resolve that??
And what does the advance-setting of the clearing the website data does? Sorry, I'm not familiar.. what's is that used for? Should I use that feature as well?? Thank you!

This indicates corrupt files.
A restore should resolve.

What are options available to cancel the Excise Invoice?

Hi,
What are options available to cancel the Excise Invoice?
Does cancelling the commercial invoice automatically cancels the excise invoice
if not what are the other options?
Any settings required to achieve that.
Usefull answers will be rewarded
Thanks
Regards

Dear Rajiv
No cancelling commercial invoice will not cancel the excise invoice in background. For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group. Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
thanks
G. Lakshmipathi

Where is the advance preferences in the brand new iMovie? it used to be in that button area. i need to do picture in picture!

where is the advance preferences in the brand new iMovie? it used to be in that button area. i need to do picture in picture!

This should help you.
https://discussions.apple.com/message/23468325#23468325

Where did the advance tab go on icloud

Where did the advance tab go on icloud so you can delete from photo stream?

Hi tracyd321,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: Delete photos or videos from a shared stream
http://support.apple.com/kb/PH12071
Cheers,
- Judy

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.

Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380)

What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

My question today: What are strengths and weaknesses of the
sap.m.Shell
and
sap.m.App
as container for an application wrapper?
I currently use non of them, but I see the advantages.
SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

We prefer to say, the tender mercies of the Fetch block.
You'll notice the "wfm info" cluster as an output of the Fetch
VI. This cluster has gain and offset members- use these to scale
your binary data to floating point voltage representation.
As you point out, the numbers won't be exactly what you expect given
the vertical range and the device resolution. There are a few
reasons for this. First, we don't use the absolute full scale of
the ADC for the maximum input voltage. There are a couple of
codes of headroom at the top and bottom. This allows your input
signal to slightly exceed the specified vertical range without clipping
(you'll get a warning from the driver). Second, these gain and
offset numbers take into account calibration information for your
device. Using these numbers will correct for small deviations
from the ideal offset and gain.
So if you use the gain and offset numbers from the driver, your
measurements will be more accurate than if you assume 0 offset and
perfect gain. They will be most accurate if you make sure to
perform a self-calibration once the device is in your system and at the
temperature that your tests will be run.

I forgot my password and deleted my email account. How do I regain it so I can see what purchases I have made in the past?

I forgot my old password under a deleted email address. Is there a way to get access to that account so that I can see what purchases I have made in the past? This was at least 5 years ago that I did this? Thank you.
Brian C.

that didnt help because when i plug in my iphone to the computer it doesnt show my iphone in itunes all it does it pop up saying if i would like to download and update my ios software to ios 7.1.1 . when i put it in to DFU mode it didn't do anything and thre computer did not recognise it and neither did itunes. so i dont quite understand how to do this ill keep on trying and see if im in luck.

Is it possible to see what traffic my clients made on the time capsule?

Hello!
is it possible to see on my macbook what traffic my clients made on the time capsule?
With airport utillity 6.2 i cannot see this!
sorry for my english and thanks for help

If you control-click on the Time Machine icon and select "Browse Other Time Machine Disks" but don't see the other backups, try this: Look in the "sidebar" of a Finder window for your Time Capsule. If you see it, select it, then look for the Time Capsule's disk (probably called "Data" if you didn't rename it). Double-click that to mount it. Now try again to control-click on the Time Machine Dock icon.

I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
Working with a Retina Macbook Pro and current software
These are newly created documents

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

The changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanks

Clear your browser cache also and see if the changes are visible.....
Arun

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

What are the advancements made in the iCloud

Similar Messages

Maybe you are looking for