What are the AIA pack's needed for Biotechnology and pharma industries

Hello
We have a client in biotechnology & Pharma that needs AIA/PIP's to be installed.
Please suggest if any of them are available
Thanks
Sam

If you have experience in Java development and maybe have used other UI frameworks (using MVC pattern) you should be able to pick up WebDynpro pretty quickly.
There are a lot of articles and tutorials available for CE/BPM. Check out http://www.sdn.sap.com/irj/sdn/nw-ce as a starting point.
Edited by: Christian Loos on Aug 20, 2010 2:59 PM

Similar Messages

  • What are the parts i will need for my ipod since my ipod screen remains completly blank white

    what are the parts i will need for my ipod since my ipod screen remains completly blank white

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What are the system settings, etc., needed for a project in DV widescreen?

    Hello - to do a project in DV widescreen -- what are the proper system settings and what steps must I take to import and log footage? I've tried the anamorphic -- but viewer doesn't connect to camera -- sorry this is so rudimentary but if anyone can help me get it going, I'd be very grateful. Thank you!

    If your footage is DV NTSC, it is anamorphic if it's widescreen. You should be able to simply use the "Easy Setup" for DV NTSC Anamorphic and edit your heart out.
    If you can't see the camera, might trash preferences: http://fcprescue.andersholck.com/
    And if that doesn't work, QT 7 should be reinstalled: http://docs.info.apple.com/article.html?artnum=301852
    Jerry

  • I would like to buy used  Ipad 3gen 32 or 64 GB   .What are the things I should check for.(and how to check it) It is cash deal -no warranty.

    I would like to buy used Ipad 3 32 or 64 GB.It is cash deal and no warranty. What are the things I should check and how to do it ?

    Make sure it is in perfect working order before you turn over any money.
    Test connected to Internet.   Test Safari and several other apps for crashes.
    If it passes this test, it must now have find my iPhone turned off by the seller.   They must also remove the device from their iCloud account.  
    *****Please observe this.   If the seller can't turn off find my iPhone, then it is not his iPad to sell.   It will lock when you try to activate and will be worthless.****
    If this is the owner of the iPad he can also remotely erase the iPad with iCloud.
    http://support.apple.com/kb/HT5661

  • What are the PSE 8 default locations for photos and catalog files in Windows 7?

    I can only find this information in the Knowlege Base for XP and Vista.
    Thanks for help

    The default locations for catalog folders on Wndows 7 is the same as on Vista:
    http://kb2.adobe.com/cps/515/cpsid_51536.html
    To find out where the current catalog folder is located, do Help > System Info.
    The default locations for photos are under My Pictures on Windows 7, as compared to Pictures on Vista.

  • Hi i have purchased the rookie pack in need for speed most wanted but it hasn't appear yet.i tried every thing but yet it hasn't appear.what should i do?

    hi
    I have purchased the rookie pack in need for speed most wanted but it hasn't appear yet.i tried every thing but yet it hasn't appear.what should i do?

    To Contact iTunes Support and request assistance Click  Here

  • What are the Corresponding fields in CRM for sales order in ECC

    HI! Experts,
    While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
    VBKD-BSARK - Purchase order type
    VBAK-BNAME - Name: user ordered
    VBKD-IHREZ - Web Confirmation Number
    VBAK-TELF1 - Telephone number
    Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
    Thanks and Regards
    Mayank

    Mayank,
    May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
    Check the following fields in CRM and see if you find the data you require.
    VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
    VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
    VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
    VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship  "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
    Hint: Once you have the R/3 order in CRM, try using the Report program (SE38)  CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
    Easwar Ram
    http://www.parxlns.com

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi,
    I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
    I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
    Dr. Kirco Arsov
    Solved!
    Go to Solution.

    Hi Kirco,
    I have some more information for you :-)
    I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
    As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
    From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
    TB_0_LevelEdgeReg :: Offset 0x660
    TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
    7..6: EdgeMode
    5..0: LESel
    LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
    EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
    TG_0_CombinationReg :: Offset 0x6A0
    TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
    19..16: CombFunction
    5..4: CombTypeB
    1..0: CombTypeA
    CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
    CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
    CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
    All of the other bits should be set to 0b0.
    Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

  • What are the third party tools available for Encryption in Oracle database?

    Dear All,
    Can you please help me with the below question?
    What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

    Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
    http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
    But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
    1. Operating system
    2. Database edition and version
    3. What type of data needs to be secured
    4. What level of security is required

  • What are the connections to be done for file-to-RFC scenario in XI & R3 ?

    Hi,
    What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
    I need to know what type connections used for  file-to-RFC in backend .
    In SLD it should be Third Party or  WEB AS ABAP..

    Hi Nandan,
    Perform the following configurations...
    <b>SAP XI</b>
    <b>1) RFC Destination (SM59)</b>
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    <b>2) Create Port (IDX1)</b>
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    <b>SAP R/3</b>
    <b>1) RFC Destination (SM59)</b>
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    <b>2) Create Port (We21)</b>
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    Regards
    San
    Remember to set the thread to solved when you have received a solution there is a Way.

  • What are the steps (High level) needed to implement US Payroll?

    Hi,
    What are the (high level) steps needed to implement US Payroll?
    Please provide any relavent URLs for any steps if possible.
    Thanks,
    Prabakar

    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-PE03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Check Default Payroll Area
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine EE Sub Group Grourping for PCR and Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine Reason for Change
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck Assignment of PayScale Structure to Enterprise Structure
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDetermine Default for PayScale Data
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PaySetup Payroll Period for Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine PayScale Salary ranges
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type Group u201CBasic Payu201D
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Employee Sub Group Grouping for Primary Wage
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Personnel Sub Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionDefine Reason for Change
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type Group u201C Recurring Payments and Deductionu201D
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Personnel Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Define Reasons for Changes
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type Group Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Entry Permissibility for Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    This is not the complete once just for reference purpose i have given it to u
    Edited by: Sikindar on Nov 19, 2008 9:19 AM

  • What are the best imovie, mpeg4 settings for making dvds?

    What are the best imovie, mpeg4 settings for making dvds?

    • iMovie'08 to 11
    - Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
    iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
    iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
    • DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
    • iDVD does only care about TIME / Duration as
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    • iDVD Does Region = Zero (to be played everywhere)
    • Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
    If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
    One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
    I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
    • NTSC - US etc
    • PAL - EU etc
    Yours Bengt W

  • What are the optimal hardware specification requirements for Adobe Photoshop CS6?

    Greetings to the staff and users of this forum,
    As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
    Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
    I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
    If any user here could provide me with proper higher specs, I would really be grateful.
    Thanks,
    phdwengr

    This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
    http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

  • What are the payment plans Apple has for international buyers

    what are the payment plans Apple has for international buyers

    There are none.  If you want to buy an iPhone, then you'll need to go and buy one from an Apple store in your country or one of the phone carriers in your country that offer iPhones.  If you live in a country that does not have an Apple store, then go to an Apple re-seller.  You may be able to purchase online if there is an Apple store online for your country.
    These are your alternatives.

  • I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

    Dear Experts,
    I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
    Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
    Thanks,
    SMTP

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

Maybe you are looking for

  • Can not activate master data

    Hey, on the employee characteristic i have activated the master data, but when i check the "Q-" table there are still record whith "M" ?? The activate tell me that there are nothing to activate. Is there anyone who can tell me, how i active the data.

  • Inserting html link in web gallery

    Trying to create a clickable web link in the Collection Description text field of the default lightroom flash web gallery. Using [url] or tags don't seem to work. Any options?

  • There s no sound when I connect my aux wire with my Bose dock

    There s no sound coming when I connect my Aux wire to my Bose dock.but my internal speakers are working perfectly , there's no output through aux

  • Windows XP Mode Stopped Working

    I installed Windows XP Mode on my computer in order to access certain items from work that only function on an XP system.  XP Mode was slow, but was certainly functioning.  However, recently, it has stopped working.  When I select Windows XP Mode fro

  • Windows 7 loading problem

    I had setup new PC for general work purpose. But problem is in my new PC I can't load windows 7 ultimate but windows xp works fine. First of all I boot windows 7 dvd, then it loads some files but before I getting new window "install now" comes it dis