What are the basic pre-requisites to Customize API in iSetup?

Hi,
Could you please let me know what are all the basic knowledge and pre-requisites needed to customize the API in iSetup?
Thanks,
Harish Nunna.

Please go through the metalink note: 843397.1 (iSetup developer guide). This is the good starting point to know how to go about. If you are working on a specific requirement, please log a SR. I would be able to assist you.
Thanks
Mugunthan.

Similar Messages

  • What are the System pre-requisite for the BODS installation(SAP Data services)

    I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

    Hi Siddhu,
    Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
    Tutorial: How to install SAP Data Services 4.2 - Part 1
    Regards
    Arun Sasi

  • What are the basic .jar files to be set in web dynpro project classpath

    Hi,
    I am having a problem while customizing the ESS. I used DTR, DC and imported configuration. After that, I created project from one of the DC(say ess/jp/addr). Later when I open an iView from any Web Dynpro component, I am getting lot of errors without even making any modifications.
    I closed the project and reopened it and reload & rebuilt, but it doesn't solved my problem. In my classpath settings I couldn't find any jar files except the jre_lib. Could you please let me know what are the basic jar files we have to set in classpath and where to get them from. We are using NWDS 7.0.06 version.
    Can you please let me know how to solve this or any other way to work around this.
    It's an urgent to be fixed as early as possible, plz help me out.
    Thanks & Regards,
    Raj

    Hi Julien,
    Thanks for your reply.
    We imported the the specified SCAs in our track.
    we are getting the following errors.
    Kind Status Priority Description Resource In Folder Location
    Error The import com.sap.xss.per cannot be resolved CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 18
    Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument fpm of the method loadConfiguration CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 113
    Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
    Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument currentPerspective of the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
    Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
    Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument perspective of the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
    we manually set below .jar files in classpath settings.
    pcuixssfpm.jar
    pcuixssutils.jar
    logging.jar
    essper.jar
    Is there any alternative to work around.
    Thanks & Regards,
    Raj

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • What are the basic difference in the putting a variable in Query

    what are the basic difference in the putting a variable in
    1. Characteristic Restrictions Vs 2. Default Values

    Example - Cost Center Analysis Report - If I have Controlling Area in
    Char Restricitons Only - I have restricted it to say ABC Controlling Area or a Variable- Report will be hardcoded to ABC Controlling Area or the Input Value entered during Runtime - After Execution, The Same cannot be changed in the report.
    Assuming I will not have Controlling Area in the report means not in Rows n Columns.
    You might have seen no change - > Did you place material in Rows or Columns ?

  • HT5295 What are the basics of creating and distributing Podcasts?

    What are the basics of creating and distributing Podcasts?

    Search the web for "creating podcasts" and you'll find a plethora of information.
    Regards.

  • What are the basic element of Base configuration of an oracle Database ?

    What are the basic element of Base configuration of an oracle Database ?

    889543 wrote:
    What are the basic element of Base configuration of an oracle Database ?check this link
    http://www.dbnest.com/entry/194/
    and if you want to configure oracle installation click below link .
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/install002.htm
    --neeraj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • What are the basic knowledge needed for swift coding?

    can someone please tell me what are the basic coding languages needed for swift coding .
    Like do we need to know c or c++ ??
    Thanks

    Although C is the default language of Unix, Swift does not require that you know C in order to learn or program in Swift. But knowing a programming language is a helpful step in learning a new programming language.
    If you read the manual's first couple of chapters you will see what the goal of designing the Swift language was. In the manual they even suggest you can learn Swift without knowing C. They have removed the indirection of the C reliance on pointers and other arcane methods in order to make Swift easier and quicker to learn.
    If you have no programming experience then I would suggest you might start with BASIC or Pascal. When you are comfortable with programming then you can take on Swift.

  • What are the Basic Features of Enterprise Portal

    What are the default, given or otherwise features of SAP netweaver/enterprise portal. I do not want to redo a function or feature/template of the feature/basic iview (portlet) already exists. And where I can find/get these features.
    Thanks.

    Hi Joshua,
    yes, there is preconfigured content (templates) in the portal.
    Have a look at [SAP Help|http://help.sap.com/saphelp_nw70/helpdata/en/5a/0338f80c0b11d7b84800047582c9f7/frameset.htm].
    You'll find two entries in the left hand navigation: "Pre-configured Roles" and "Standard Portal Content".
    The information is not that detailed but you might get a first impression.
    Besides the standard portal content there are so called Business Packages, which provide pre-configured iViews, pages, worksets and roles for specific business processes / scenarios. You can find them [here in SDN|https://www.sdn.sap.com/irj/sdn/contentportfolio].
    Hth,
    Michael

  • What are the best design requisites for a Query design?

    Hi Guru's
    Could you please let me know,which item will execute first when you run a query,I mean Calculated keyfigure,restricted keyfigure or formula  e,t,c...How does it effects the Query performance?What are the design requisites to optimise better query performance?
    Thanks in advance,
    rgds,
    Srini.

    Hi Srinivas....
    The design of queries can have a significant impact on the performance.
    Sometimes long running queries are the result of poor design, not just the amount
    of data. There are a number of design techniques that developers can use to
    provide optimal query performance.
    For example, in most cases characteristics should be placed in the rows and key
    figures in the columns. A characteristic should only be used in the columns in
    certain circumstances (like time). Characteristics having potentially many values
    (such as 0MATERIAL) must not be added to the columns without a filter or
    variables. Alternatively, it can be integrated into the query as a free characteristic
    – enabling it to be used in navigation.
    If a relatively detailed time characteristic, such as calendar day (0CALDAY) is
    added to the rows, the more aggregated time characteristics (such as calendar
    month (0CALMONTH)) and calendar year (0CALYEAR) should also be included
    in the free characteristics of the query. For most reports, a current period of time
    (current month, previous or current calendar year) is useful. For this reason, the
    use of variables is particularly relevant for time characteristics.
    To improve query performance
    1) Variables and drop down lists can improve query performance by making the
    data request more specific. This is very important for queries against Data Store
    Objects and InfoSets, which are not aggregated like InfoCubes.
    2) When using restricted key figures, filters or selections, try to avoid the Exclusion
    option if possible. Only characteristics in the inclusion can use database indexes.
    Characteristics in the exclusion cannot use indexes.
    3) When a query is run against a MultiProvider, all of InfoProviders in that
    MultiProvider are read. The selection of the InfoProviders in a MultiProvider
    query can be controlled by restricting the virtual characteristic 0INFOPROVIDER
    to only read the InfoProviders that are needed. In this way, there will be no
    unnecessary database reads.
    4) Defining calculated key figures at the InfoProvider level instead
    of the query level will improve query runtime performance, but may add
    time for data loads.
    5) Cell calculation by means of the cell editor generates separate queries at query
    runtime. Be cautious with cell calculations.
    6) Customer-specific code is necessary for virtual key figures and characteristics.
       Check Code in Customer Exits.
    7)Using graphics in queries, such as charts, can have a performance impact.
    Hope this helps.........
    Regards,
    Debjani.........

  • What are the basic components in the library plugins folder.

    What are the standard plugins in the Library/Plugins folder for Snow Leopard? I'm trying to figure out what I can uninstall and I have no clue.

    It probably contains the empty folders Components, HAL, MAS, and VST. (I'm not sure, since my folders do contain stuff.) But none of Apple's standard effects and instruments are sitting there.

  • What are the basic settings required to run webdynpro for abap application?

    Hi,
              i want some information regarding settings(HOST,Port) to run our application through Browser.What are the settings can i give to run my Application.and also i got some problem that when i create a VIEW it didnt shows the Standard Toolbar of Consisting of all UI Elememts.Is this problem is related Installation?
    Thanks & Regards
    Ravi

    Hi Ravi,
    This will be helpful please check.
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm.
    Reward points if useful.
    Regards,
    Muneesh Gitta.

  • What are the basic requirements for an SAP MM fresher to get through an interview?

    Hello,
          I completed my BE in Mechanical in 2012 and have some some experience of 2 years in mechanical field. Now i planned to switch my career into SAP MM. I am doing a classroom course on SAP MM.
          So please suggest me the basic knowledge required ( Like topics) for a fresher to get through an interview.

    Hi  Kumar,
    I will give just hints rest you have to think and act not about Interview quotations but SAP MM career.
    There are  couple of  guys and all of them has got job, first as a SAP testing, as SAP freshers in HCL/HP India etc.
    Later on  they have learnt all the business process in project and all the E2E cycles in  MM/SD/FICO etc.
    Now they are working on support projects and roll out projects.
    I think there are ways and we need to understand how to explore all the job possibilities.
    Please have good knowledge and definitely you will succeed. Short cuts are not always the way to success.
    Hope all my fresher friends will find some clue here....
    Regards,
    D Singh

  • What are the basic objects in abap dictionary ?

    Try to provide the details if anyone knows about it.

    The DDIC is nothing but the ABAP Dictionary. The ABAP Dictionary centrally describes and manages all the data definitions used in the system.
    Data types
    Data types are the actual type definitions in the ABAP Dictionary. They allow you to define elementary types, reference types, and complex types that are visible globally in the system. The data types of database tables are a subset of all possible types, namely flat structures.
    Data Elements
    Data elements in the ABAP Dictionary describe individual fields. They are the smallest indivisible units of the complex types described below, and are used to specify the types of columns in the database. Data elements can be elementary types or reference types.
    Structures
    A structure is a sequence of any other data types from the ABAP Dictionary, that is, data elements, structures, table types, or database tables. When you create a structure in the ABAP Dictionary, each component must have a name and a data type. In an ABAP program, you can use the TYPE addition to refer directly to a structure.
    If you define a local data type in a program by referring to a structure as follows:
    TYPES <t> TYPE <structure>.
    Table Types
    Table types are construction blueprints for internal tables that are stored in the ABAP Dictionary.
    When you create a table type in the ABAP Dictionary, you specify the line type, access type, and key. The line type can be any data type from the ABAP Dictionary, that is, a data element, a structure, a table type, or the type of a database table. You can also enter a predefined Dictionary type directly as the line type, in the same way that you can with a domain.
    Type Groups
    Before Release 4.5A, it was not possible to define standalone types in the ABAP Dictionary to which you could refer using a TYPE addition in an ABAP program. It was only possible to refer SAP AG BC - ABAP Programming
    Data Types in the ABAP Dictionary to flat structures. Structures in programs corresponded to the structures of database tables or structures in the ABAP Dictionary. In ABAP programs, you could only refer to database tables and structures in the ABAP Dictionary using LIKE. It was, however, possible to refer to individual components of the Dictionary type. Complex local data types such as internal tables or deep structures had no equivalent in the ABAP Dictionary. The solution to this from Release 3.0 onwards was to use type groups. Type groups were based on the include technique, and allowed you to store any type definitions globally in the Dictionary by defining them using TYPES statements.
    Views:
    There are 4 types views are avilable in SAP.
    Database View - To club more than one table
    Projection View - To hide fields in one table
    Maintanance View - To maintain database records in table
    Help View - To provide help for a fields (Same functionality as Search help. This is outdated)
    View are improves perfromance in the following aspects
    1. If you want to use more than two table in 'JOIN' condition better to use Views . It will improves performance of a program
    2. If you want to use mutiple FOR ALL ENTRIES clause, better to club all SELECT statement in a view.
    Lock Objects:
    Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
    SAP Provide three type of Lock objects.
    Read Lock(Shared Locked)
    protects read access to an object. The read lock allows other transactions read access but not write access to
    the locked area of the table
    Write Lock(exclusive lock)
    protects write access to an object. The write lock allows other transactions neither read nor write access to
    the locked area of the table.
    Enhanced write lock (exclusive lock without cumulating)
    works like a write lock except that the enhanced write lock also protects from further accesses from the
    same transaction.
    You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
    Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
    Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
    Technicaly:
    When you create a lock object System automatically creat two function module.
    1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
    2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
    You have to use these function module in your program.
    Search Helps:
    These are two types.
    Elementary n Collective.
    1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
    2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
    3)An elementary search help defines the standard flow of an input help.
    4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
    5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
    6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
    See the below link to understand this completely:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
    Rewards if useful

  • What are the basics for a dance track?

    I've just got my new macbook and i want to try out garageband. I have absolutly no idea about composing a track so I am looking for some tutorials to get me started. I want to try putting together a dance track.
    Does anyone know of any tutorials that teach you basic composition of a dance track?
    Zap

    Hi Zap
    I don't know of any tutorials (yet - but I'm looking).
    I think the best thing to do would be to pick two or three of your favourite dance tracks and put them on repeat for a while.
    Get a pen and paper and map out for yourself what's happening. What instrument do you hear first? What kind of sound is it (ie edgy, washy, etc.) What comes in next, etc. Map out every sound you can hear, then go back and start noticing things like volume ratios etc. (how loud is the piano compared to the bass, say) A track usually follows an "arc" like a story. This is really noticable in progressive trance so a track like that might be a good way see how things are put together.
    This is a similar process to what the Classical set call "score reading" which they do to study style for composing.
    Once you know how your favourite tracks are put together you'll have a better idea of how to do your own.
    Hope this helps.
    Drelika
    iBook G4   Mac OS X (10.4.7)  

Maybe you are looking for