What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

Similar Messages

What are apple's specifications for acceptable performance

I sent my ipod in for service because it's freezing up on me; on a daily basis... and all i get back is a letter telling me that my ipod is within apple's specifications for acceptable performance. In addition to telling me they've done everthing I've already done to try to resolve my problem. But for some stange reason they never stated what apple's specifications for acceptable performance are. Not to mention you can't find any information on thier website. Anybody know where I can find this information..

Welcome to Apple Discussions!
If the iPod is doing as you say, then it is not fine and Apple should repair it.
However, Apple may not have found something in the hardware that is wrong with the iPod.
Have you tried updating and restoring the iPod before?
iTunes
iPod Updater
Updating iPod's Software
To Restore...
Restore the iPod
If none of the above works, you may want to call Apple and explain what is wrong and what you have tried. Ask why it was not repaired...
Apple Phone Numbers
btabz

"The transaction log for database 'speakasiaonline' is full." I'm getting this message when I m trying to login to speakasia website and am unable to open it. Pl help.

The transaction log for database 'speakasiaonline' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases

What does it return?
SELECT log_reuse_wait_desc FROM sys.databases WHERE database_id=2
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Is there a way to disallow web pages to modify foreground color of elements if background of those elements was not changed as well (and vice versa)?

I have very sensible defaults for my display; i.e. I have dark GTK scheme (dark gray background, light gray text) that suits me way more when working on my computer while it's dark around. I, however, like looking at web pages as how they were mean to be seen. Unfortunately, most of web designers don't think about anyone having non-default colors set up.
Example one ( http://www.cedok.cz ):
This site's CSS style has "color: rgb(45, 45, 45);" for the whole <body> but for <select> elements there is no "background-color" set. This means there is a select box rendered with dark gray background and dark gray foreground (text color). This is pretty badly readable (obviously).
To mention one particular element from this site: e.g. <select id="ctl00_ContentPlaceHolderLevySloupec_HledaniMultiTab1_HledaniZajezdu1_ddlTypZajezdu">
Example two ( https://support.mozilla.org/en-US/questions/new/desktop/customize/form ):
On this page (where I'm currently filling in this question) the <textarea id="id_content"> has "background: ... rgb(255, 255, 255);" set, but with my default font color, this textarea is rendered as light gray text on a white background. Again, pretty unreadable (and eye-hurting).
I can provide screenshots and more reasoning if needed.
I'm asking if there is (or might be) an option (even disabled by default) or at least an add-on which would keep default colors unless both foreground and background colors were specified. I think this might make Firefox very usable for many people which like to have their default colors configured.
In case you won't be able to help me by fixing this, could you redirect me to the right place where I could get this requested in a way that might be really possible to happen (bugzilla?).
Thank you very much in advance.

Thanks for the reply, but I'm sorry, no. I don't want any addon that customizes colors, I want to use default colors and only prohibit changing them unless both background and foreground colors are changed.
I have made no color changes WRT to Firefox *only*, I just changed the default for the whole toolkit (gtk in this case). The thing I need is to disable changing *only one* property out of two ({back,fore}ground). Whenever the second one gets set as well, this new setting (both of them) may get reflected, but not before that. It'd be nice to keep this when changing the colors back (deleting the style), but that's not necessary.
I hope that's understandable, feel free to ask for if that's not the case.
To express what I mean a bit more precisely, see the attached image. In that image there are four textareas (one of the elements that gets affected by this). First one is a default one (which I want to have if the page has nothing set), the second one is nicely modified to fit for example to a blue-ish page (this one I like as well).
Second row of textareas shows how the final element looks like if the page has only one of these elements set up. First one changes background without changing font color, the second one vice versa. Both of them are very badly readable, especially with low lighting around.
This is consequently the same case when it comes to default page background which I cannot set at all, because too many pages have only "color:" set without changed background and that is completely messed up then. Going to extremes, I might mention all color-related modifications (see how ugly the borders look when the background is changed and nothing is done to these borders, their size and color is kept default), but I understand that's too much.

What is the best way to replace the Inline Views for better performance ?

Hi,
I am using Oracle 9i ,
What is the best way to replace the Inline Views for better performance. I see there are lot of performance lacking with Inline views in my queries.
Please suggest.
Raj

WITH plus /*+ MATERIALIZE */ hint can do good to you.
see below the test case.
SQL> create table hx_my_tbl as select level id, 'karthick' name from dual connect by level <= 5
2 /
Table created.
SQL> insert into hx_my_tbl select level id, 'vimal' name from dual connect by level <= 5
2 /
5 rows created.
SQL> create index hx_my_tbl_idx on hx_my_tbl(id)
2 /
Index created.
SQL> commit;
Commit complete.
SQL> exec dbms_stats.gather_table_stats(user,'hx_my_tbl',cascade=>true)
PL/SQL procedure successfully completed.
Now this a normal inline view
SQL> select a.id, b.id, a.name, b.name
2 from (select id, name from hx_my_tbl where id = 1) a,
3 (select id, name from hx_my_tbl where id = 1) b
4 where a.id = b.id
5 and a.name <> b.name
6 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=7 Card=2 Bytes=48)
1 0 HASH JOIN (Cost=7 Card=2 Bytes=48)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
3 2 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
4 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
5 4 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
Now i use the with with the materialize hint
SQL> with my_view as (select /*+ MATERIALIZE */ id, name from hx_my_tbl where id = 1)
2 select a.id, b.id, a.name, b.name
3 from my_view a,
4 my_view b
5 where a.id = b.id
6 and a.name <> b.name
7 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=1 Bytes=46)
1 0 TEMP TABLE TRANSFORMATION
2 1 LOAD AS SELECT
3 2 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
4 3 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
5 1 HASH JOIN (Cost=5 Card=1 Bytes=46)
6 5 VIEW (Cost=2 Card=2 Bytes=46)
7 6 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
8 5 VIEW (Cost=2 Card=2 Bytes=46)
9 8 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
here you can see the table is accessed only once then only the result set generated by the WITH is accessed.
Thanks,
Karthick.

What is the best way for this situation?

Hi I have an xml file in my application. over a period of time i have to add few nodes to the existing xml file.
In my business logic when a specific requirement is met i have to add one child node to the existing parent node for an existing xml file.
what is the best way to do this? which api is the best for this?

DrClap wrote:
Muralidhar wrote:
using DOM parser we can parse the xml file but can we write to XML file?Sure. That's the inverse operation of parsing, and it's called "serializing".
The usual way to serialize a DOM to a file is to create a Transformer and apply the identity transformation to the DOM. However there are also third-party XML serializers that don't take that approach.I have not understood what the identity transformation mean. but i have searched for an example and found the following way to do it using Transformer. I hope what i find is right.
Transformer tFormer = TransformerFactory.newInstance().newTransformer();
          tFormer.setOutputProperty(OutputKeys.METHOD, "xml");
          Source source = new DOMSource(doc);
          Result result = new StreamResult(new File(url.toURI()));
          tFormer.transform(source, result);

What is the best way for my wife to sync her Outlook contacts to her new iPad Air?

What is the best way for my wife to sync her Outlook contacts to her new iPad Air? I don't know very much about Microsoft (almost nothing). Does she need to plug into one of the USB ports on her Microsoft computer (about 5 years old)? I also have an iMac (that I use for syncing but she needs her contacts from Outlook. She doesn't really want all of them...there are 1,000's of teachers that work in her district and she does no tent to add 1,000's of contacts.

If she only has a few she can e-mail those contacts to herself, open that mail on her iPad and save them from there.

What is the best way for my partner and I to share our work across computers?

What is the best way for my business partner and I to share our work (projects, libraries, images) across computers without emailing items? Is there creative cloud storage place we can share?

Can't I just purchase the 200 GB storage, throw our photo library in it, share it with her, and have both of our new and future pics dumped into it? If so, how do I do that?
The iCloud Photo Library cannot be shared between users, unless you are using the same AppleID.
You can share selected photos with shared albums: iCloud: iCloud Photo Sharing FAQ
Or create a Photos library on an external drive, that you both can access, as described here for iPhoto: iPhoto: Sharing libraries among multiple users

What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

You can't share with other devices if you are using different Apple ID's and iTunes account on them. You can only share if you use the same ID.

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto?

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto? thank you.

ingridlisa,
I'd suggest to ask them to create Shared PhotoStreams and to invite you to view the streams, see:
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Added:
that I'll be putting in my iphoto?
Will you be collecting the photos in iPhoto on your iPhone or on a Mac? On a Mac a Shared PhotoStream requires Mac OS X 10.8.2.

Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). What is the best way for me to install it?

Hi, I purchased Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). I have never installed it anywhere else. What is the best way for me to install it?

Hi lintonm86921521,
I can understand your concern & will guide you through this.
I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
In case if you have any further query please let us know, we will be happy to help you.
Regards,
Aadesh

HT4914 I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

Is/was failing or has failed?
If the old computer still runs one of these methods may be best.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
tt2

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

Thanks for the quick help. I do have to leave for work. When I try to
download the images from the camera they seem to only be in jpeg (I don't
see any rw2 or raw files to download). If I select the jpeg file it seems
to only download a jpeg file. I do understand that I do have the option to
open the jpeg in RAW. In doing this, is all the extra information included
in the RAW file there or is it lost coming from the camera
Once again thank you for trying to make me understand how this works.
Have a great day.
On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Similar Messages

Maybe you are looking for