What are the biggest differences between the 5C and the 5S?

I think as soon as the developers discover CoreMotion, all of the apps will migrate to using that so fast it will cause your head to spin.
I think this will cause the obsolesces of more mobile hardware then anything prior to it. The whining and moaning on these forum is going to be so great.
Allan

Similar Messages

What's the biggest difference between Premiere Pro and other options?

Thanks!

"Other options" ... as in NLE's? You're not very specific there ... so all I can do is note that all other video processing programs are designed to realistically do one part of the task, with the need to pass-off to different programs typically by different makers to do the Whole Job. Adobe's pro video programs are designed to work together, and do so pretty well in all. PrPro for editing your footage into a viewable form/timeline, AfterEffects for any specific needs for Fx work, SpeedGrade for colorist/grading work (making it pretty or day-to-night or whatnot) and Audition for cleaning up, augmenting, or building your audio, then to Adobe Media Encoder for outputting to all sorts of codecs/formats for final use.
Neil

Exact difference between System status and the user status

Hi,
Please tell me the exact difference between System status and the user status .
how we customize the both in the system
Thanks & Regards
Prajith P
Moderation: Locked. Please, try to find an answer first. See rules of engagement
Edited by: Joaquin Fornas on Feb 23, 2012 11:14 AM

Hi,
As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
System statuses will be updated automatically based on business transactions which will be done on SAP.
For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
These user status as per the name, should be updated by the user manually.
Regards,
Maheswaran.

What are the major differences between UCCX v7 and v8.0.2

Does anyone know of a matrix or document which shows the major differences between UCCX v7 and v8.0.2?
I have looked high and low, even searched this forum, but have not found anything.
I've even looked at release notes in 8.0.2 but couldn't see anywhere that states the changes.
Any help appreciated.

Hi,
I have awarded you both with the 'correct answer'.
I went through, painstakingly, the documents I was linked to above and compared.
In the end the major differences are pretty much what you have outlined here - which is exactly what I wanted.
Thank you both very much.
Cheers,
Brett
PS: Here are the obvious differences I found going thru the documentation I was linked to... (pretty much what you said)
Feature
V7
V8
High   Availability over the WAN (HAoWAN)
No
Yes
Available in   an Appliance Model
No
Yes
Read-only access to Cisco Unified Contact Center Express   database (Informix) with JDBC, ODBC, or Structured Query Language (SQL)
No
Yes
System   Software Configuration
MS Windows Server   2003
Cisco Media   Convergence Appliance Software
System   Software Configuration (client)
XP and Vista
XP, Vista, and Win7
System   Software Configuration (browser based client software)
No
CAD and Workforce   Management
System   Software Configuration (Web 2.0 based client software)
No
QM and AQM
Operating   System
Cisco OEM Windows   Server 2003
Cisco Voice OS

What are the major differences between 4.7 and ecc5.0

hi all
What are the major differences between 4.7 and ecc5.0
regards
JK Rao

Hi,
Good morning and greetings,
Please use the following link
http://solutionbrowser.erp.sap.fmpmedia.com
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

What's the difference between Java SDK and the Enterprise Edition?

What's the difference between Java SDK and the Enterprise Edition? Are they both free?

both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

What is the exact difference between Purchse order and purchase requisition

Hi all,
What is the exact difference between Purchse order and purchase requisition.
Thx

Hi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam.

Whats the actual difference between Business system and Business service

whats the actual difference between Business system and Business service

Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Also go through these links and threads...
http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Business service or Business system??
Business Service vs Business System in Integration Directory.
Best Regards

What is the difference between partition-count and the number of caches?

What is the difference between partition-count and the number of caches in Coherence? Are they same?

Those are totally orthogonal concepts.
For more, look at this thread where I answered your other related questions and explain this, too:
Where can I find the accurate definitions of these terms?
Best regards,
Robert

What is the main difference between f.13 and f13e

Hi,
What is the main difference between f.13 and f13e.
when clearing the document do they follow deifferent steps in selection?
Thanks,
Sravanthi

Hi,
The reason "Clearing currency" is provided is because you can clear in any currency apart from local currency. For eg if your local currency is INR and Document currency (Invoice) is USD and the customer pays in EUR, you can still clear them with the Clearing currency EUR. On the date of payment, Open items in USD will be converted into Clearing currency EUR as follows: USD to INR and from INR to EUR. (based on exchange rates between USD-INR and INR-EUR).
Jayaram

What is the basic difference between Hyperion Planning and HFM

Hi GURU'S,
what is the basic difference between Hyperion Planning and HFM and when do we choose them.

On a high level the difference is this:
1. HFM is best for global collection (collecting data from scattered entities), group consolidation and for easily structuring financial reporting (mainly consisting of financial data)
2. Planning is best for modeling your business, starting from a demand forecast and arriving to capacity planning and finally to financial statements, by utilizing business drivers (non-financial data like volumes, prices, productivity rates etc)
Of course, differences may be analyzed at several levels down to technical, but the discussion may turn out to be too long, yet adding little value to the question: "when do we choose the one over the other". Bear in mind that your requirements may turn out that you need both.

What is the exact difference between Database Cloning and Database Refresh?

Hi,
Can anybody tel me the exact difference between Database Cloning and Database Refresh?
I Have some conflicts in these topics.
Thanks
Rajesh

Refresh is what it says, "refresh" . You have a main site which would always have the data being inserted into it. There would be another site which would remain some where else . This site needs to be refreshed with the primary site. So you need to do export from the primary, push it to the secondary site and done!
HTH
Aman....

Can anyone explain the main differences between CRM 2007 and CRM 7?.

Can anyone explain the main differences between CRM 2007 and CRM 7?.
Does CRM 2007 use the WebUI?.
Jason

My fault for not putting my question forward correctly.
I have worked with CRM 7 a few times now, but my experience has jumped me from CRM 5 straight to CRM 7, having never touched CRM 2007.
I now have an opening to work on CRM 2007 so I was intrigued to know what it physically looked like. I assume it does not use the WebUI interface?.
Jas

BCT - how to find the difference between installed BCT and the newest BCT?

Hi,
How do I find the difference between installed BCT and the newest BCT?
or find a description of the newest BCT?
Thank you.
- Gunnar

Hi,
Thank you for your answer.
I am aware of the possibilities you mention.
I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
That is for example:
If F&R business content has been moved from 3.x technology to 7.0
If there is changes to the F&R content at all
-> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
The possibility to see that the only changes might be in the area of SAP HCM ...
Thank you.
- Gunnar

Wat is the exact differences between clustered table and pooled table

hi,
can you tell me ravi...wat is the exact differences between clustered table and pooled table
with regards//
anilreddyg

Hi Anil Reddy
Pooled Tables, Table Pools, Cluster Tables, and Table Clusters
These types of tables are not transparent in the sense that they are not legible or manageable directly using the underlying database system tools. They are managed from within the R/3 environment from the ABAP dictionary and also at runtime when they are loaded into application memory.Pool and cluster tables are logical tables. Physically, these logical tables are arranged as records of transparent tables. The pool and cluster tables are grouped together in other tables, which are of the transparent type. The tables that group together pool tables are known as table pools, or just pools; similarly, table clusters, or just
clusters, are the tables which group cluster tables.Not all operations that can be performed over transparent tables can be executed over pool or cluster tables.
For instance, you can manage these tables using Open SQL calls from ABAP, but not Native SQL.These tables are meant to be buffered and loaded in memory, because they are commonly used for storing internal control information and other types of data with no external (business) relevance. SAP recommends that tables of pool or cluster type be used exclusively for control information such as
program parameters, documentation, and so on. Transaction and application data should be stored in transparent tables.
Table Pools
From the point of view of the underlying DBMS as from the point of view of the ABAP dictionary, a table pool is a transparent table containing a group of pooled tables which, when created, were assigned to this table pool.
Field Type Description
TABNAME CHAR(10) Table name
VARKEY CHAR(n) Maximum key length n =< 110
DATALN INT2(5) Length of the VARDATA record returned
VARDATA RAW(m) Maximum length of the data varies according to DBMS
Table Clusters
Similarly to pooled tables, cluster tables are logical tables which, when created, are assigned to a table cluster. Therefore, a table cluster, or just cluster, groups together several tables of type clusters.Several logical rows from different cluster tables are brought together in a single physical record. The records
from the cluster tables assigned to a cluster are thus stored in a single common table in the database.A cluster contains a transparent cluster key which must be located at the start of the key of all logical cluster tables to be included in the cluster. As well, a cluster contains a long field (VARDATA), which contains the
data of the cluster tables for this key. If the data does not fit into a field, continuation records are created.
Field Type Description
CLKEY1 CHAR(*) First key fields
CLKEY2 CHAR(*) Second key field
CLKEYN CHAR(*) nth key field
PAGENO INT2(5) Number of the next page
TIMESTMP CHAR(14) Time stamp
PAGELG INT2(5) Length of the VARDATA record returned
VARDATA RAW(*) Maximum length of the data section; varies according to database system
Working with Tables
The dictionary includes many functions for working with tables. There are five basic operations you can perform on tables: display, create, delete, modify, copy. Please do not confuse displaying a table with displaying the table entries (table contents). In order to display a table, it must previously exist; otherwise the system will display an error message in the status bar. For the following example, the table TABNA is used. To display this table, from the main dictionary screen, enter the table name in the Object name
input field with the radio button selected next to Tables. Then, click on the Display button at the bottom of the screen, or press the F7 function key, or, alternatively,
select Dictionary object Display from the menu.
In this screen, you can see table information such as
¨ Table type, shown next to the name of the object. In the example, it is a transparent table.
¨ Short text description.
¨ Name of the user who made the last change, and the date of the change.
¨ Master language.
¨ Table status. On the screen, you can see this table is saved and active.
¨ Development class. For information on development classes, refer to Chap. 6.
Delivery class, which sets the maintenance group for the table. It controls how tables will behave during client copy procedures, upgrades, and so forth.¨
Tab. Maint. Allowed flag, which indicates whether you can generate a screen for maintaining table entries.
¨Then, on the lower part of the screen, you can see the table fields with all associated characteristics such as:
¨ Field name.
¨ Key indicator. When set, this field is the primary key, or part of it.
¨ Data element.
¨ Basic data type.
¨ Length.
¨ Check table.
¨ Short text, describing the field.
Additional information about the table can be displayed by selecting the corresponding functions from the menu or directly from the application toolbar, such as keys, indexes, or technical settings
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Index table:
The table can be a standard table or a sorted table.
Index access is allowed to such an index table. Index tables can be used to define the type of generic parameters of a FORM (subroutine) or a function module.
Just have a look at these links:
http://help.sap.com/saphelp_nw04/helpdata/en/90/8d7304b1af11d194f600a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/74/83015785d811d295a800a0c929b3c3/frameset.htm
Regards
Sreeni

What are the biggest differences between the 5C and the 5S?

Similar Messages

Maybe you are looking for