What are the bugs in N95 8G new firmware V15?Let'...

what are the bugs in N95 8G new firmware V15?

The most important problem in new firmware is in gallery part.After installing new firmware I copy my images in image folder in 8gb hdd.after that every time I go to gallery after 2 or 3 seconds it automatically comes out and I cannot use gallery to view my images .Accroding to some reports I reinstall firmware again but problem still exist.What can I do.

Similar Messages

  • What are differences between nokia N95 8gb new upd...

    what are differences between nokia N95 8gb new update V20 and previous update V15 and what are the bugs in new update V20??

    Does your search not work?
    /discussions/board/message?board.id=swupdate&threa​d.id=31380

  • Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

    Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
    Appe does not ship outside of the countries where it sells the phones.

  • What are the problems in N95 software update V20?...

    what are the problems in N95 software update V20?
    and is the mean of UPnP and USB Mass Storage and what are thier uses?
    THANKS EVERYBODY FOR YOUR ANSWERS..

    19-Dec-2007 11:15 PM
    tito_6646 wrote:
    what are the problems in N95 software update V20?
    and is the mean of UPnP and USB Mass Storage and what are thier uses?
    THANKS EVERYBODY FOR YOUR ANSWERS..
    Read this topic its about them: /discussions/board/message?board.id=swupdate&message.id=24327#M24327
    USB Mass Storage is the possibility to use your phone as a simple flash memory without the need of any additional drivers and apps, just plug it to you PC and write/read/copy the data.
    UPnP is a something like a Wi-Fi protocol which allows u to view you images or listen to music on a compatible devices (PC, TV, music centers etc) over the air.

  • Hi Friends what are the actual differences between  AT NEW & ON CHANGE

    what are the actual differences between  AT NEW & ON CHANGE ? can you list some of the differences?

    Hi,
    At New
    1. When a new record comes at new triggers. Atnew only used inside loop and endloop.
    2. At new is controlbreak statment on at new the left side field change, the event
    trigers and the values become 0 and *
    On Change
    1. On change of works same like at-new but the diff is it can be used out side of a loop,like select and endselect,case endcase.
    2.. on change of is not a control break statement and we can use onchange of out side the loop
    and
    The Major difference between the two is that AT NEW can be used ONLY for INTERNAL TABLES, while ON CHANGE OF can be used for any loop processing i.e do..enddo, while..endwhile and loop..endloop also.
    AT NEW <field>
    The block will be executed when the SY-TABIX is 1 (or) when the SY-TABIX 1 value has a change with the SY-TABIX value.
    With this block the field towards the right to the field are not accessable with in the block, and are shown with '*'. They can be accessed outside the block.
    ON CHANGE OF <itab>-<field>
    The block also works similar to the AT First. In this block all the fields are accesseble.
    ON CHANGE OF triggers whenever there is a change in that particular field.
    AT NEW triggers whenever there is a change in the fields before that particular field.ie. if there is a change in that combinations from the first field.
    On change off' works on variabels. The 1st time the statement isreached a memory copy is made of the value. The next time the statementis reached, the current value is compared to the stored value. If thereis a difference, the coding between ON... and ENDON. is executed. Youcan use this for a table workarea field, but if you have the table loopin a routine and the routine called several times, you can get unwantedresults. (Check the value of the last loop with the value of the firstnew loop.)
    The AT NEW (and others like AT END OF...) are specially for table loopprocessing. The coding between AT new FIELD and ANDAT is triggerdwhenever a the field or any field defined to the left is changed. Yourtable should be sorted by all fields from the left up to the consideredFIELD. Btw all fields to the right contain *, so it can be usefull tohave a second workarea filled to be printed or what ever you want.
    REWARD IF HELPFUL
    RAAM

  • What are the steps to add a new MDEX host to an Endeca application ?

    Hi,
    I have setup endeca CAS, Workbench, ,Auth and Live MDEX all running in the same machine and everything works without any problem. Now I wanted to move the Live MDEX to a new host. I have installed MDEX, PS (as EAC-Agent), updated the LiveDgraphCluster.xml as per the new setup and have run a reinitialize of the application. But when I run baseline update the index is not getting copied over to the MDEX host and I am getting a EacCommunicationControlException while its trying to copyIndex in the DistributeIndexAndApply step. AuthoringMDEX still works fine as its not been moved or reconfigured. Am I missing something here ??? The error message asks me to look into the dgraph log of the MDEX host and I see only missing file message there, the files which are supposed to be copied by the applyIndex process. How can I test EAC communications ? Is it something to do with eaccmd or eac.properties ?? anything to be enabled / disabled ????
    Thanks,
    -Naga
    FYI I am using ATG 11.1

    Are we talking about the EEW Business objects displayed in the EEWB as there is no business object called 'CRM OPPORTUNITY', but there is one called 'OPPORTUNITY'. Just wanted to make sure I was on the right track.
    So, as I need to change the service ticket it would mean that my transaction type will be service request,or whatever the shorted value is, is that correct?.
    I can see the transaction types in table CRMC_PROC_TYPE_T, although it looks like I need to pick SRVO (Service order) at a guess, and if this is right I'm looking for the EEW Business object to match. But it feels like guesswork to me. For example, I could choose EEW Business object 'SERVICE_TRANSACTION' which has an Extension type of 'CUSTOMER_H', or I could choose EEW Business object 'SERVICE_CONTRACT' or 'SERVICE_CONFIRMATION', although the last is unlikely. But, my point is there is so much open to interpreatation, and I'm expecting it to be more exact. Perhaps I'm just missing something.
    Jas.
    Edited by: Jason Stratham on Sep 4, 2009 2:30 PM
    Edited by: Jason Stratham on Sep 4, 2009 2:39 PM

  • What are the steps for adding a new field to the ST for CRM 2007?.

    Yeah, I know it's a basic question. I'm fairly familiar with CRM 5.0 but 2007 is new to me and there a good few changes.
    If I need to add a new field (probably with some processing to set its value) to the Service ticket what would be the steps I need to take to achieve this in CRM  2007?.
    Your help would be much appreciated.
    Jas.

    Are we talking about the EEW Business objects displayed in the EEWB as there is no business object called 'CRM OPPORTUNITY', but there is one called 'OPPORTUNITY'. Just wanted to make sure I was on the right track.
    So, as I need to change the service ticket it would mean that my transaction type will be service request,or whatever the shorted value is, is that correct?.
    I can see the transaction types in table CRMC_PROC_TYPE_T, although it looks like I need to pick SRVO (Service order) at a guess, and if this is right I'm looking for the EEW Business object to match. But it feels like guesswork to me. For example, I could choose EEW Business object 'SERVICE_TRANSACTION' which has an Extension type of 'CUSTOMER_H', or I could choose EEW Business object 'SERVICE_CONTRACT' or 'SERVICE_CONFIRMATION', although the last is unlikely. But, my point is there is so much open to interpreatation, and I'm expecting it to be more exact. Perhaps I'm just missing something.
    Jas.
    Edited by: Jason Stratham on Sep 4, 2009 2:30 PM
    Edited by: Jason Stratham on Sep 4, 2009 2:39 PM

  • What are the 4 partition of a new Elite 8300? Which can I relete? Which impact

    Dear All,
    I juts got a new Elite 8300 and I need to have a new partition for data.
    I discovered that there already is 4 primary partitions and I can nopt create a new one.
    There are
    - a partition called "system"
    - a large partiton called "os", where is the operating system and data
    - a partition called "recovery"
    - and a unamed partition.
    I would like to delete on of them, but I do not the impact of my deletion. My goeal is to have a smaller "os" partition and to have a new partition called "datas"
    I supposed I do not have to delete the "system partition", but what happen if I delete "recovery" partition and the unamed partition. I do not care if I do not have a recovery partition. If it crash I can reinstalled the PC and I can use Windows recovery.
    Some one can tell me more about the 3 partitons "system, recovery and unamed"?
    Many thankd

    You can create logical partitions inside of the current OS partition without affecting the four primary partitions.
    The four partition limitation is only for primary partitions. Use the diskpart utility to create a logical partition inside of the largest partition.
    Partitions on your PC. (all are primary partitions)
    the C: (OS) partition contains the operating system
    the D: partition(recovery) contains the recovery partition
    the System partition belongs to the Windows OS. (it is wise to leave it alone)
    the HP_Tools partition contains  the UEFI environment (PC Hardware Diagnostics)
    The following video is in French and English. It does give a good demonstration on how to create primary and logical partitions
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My new 4s cannot send emails; emails are rejected by server. What are the correct settings?

    What are the correct settings when my new 4s can receive but will not send messages. The emails are rejected by the server,

    You're going to have to ask your e-mail provider. We don't have the slightest clue who that is, much less what the correct settings would be.

  • What are the settings required to maintain consignment storgae location

    Hi, what are the setting required to maintain new consignmnet storgae location for a customer.
    Thank you.

    Here I am giving you over all idea of Consignment:
    Consignment goods are goods which are stored at the customer location but which are owned by your company. The customer is not obliged to pay for these goods until they remove them from consignment stock. Otherwise, the customer can usually return consignment goods which are not required.
    Consignment processing offers the participating partners several advantages. Customers store the consignment goods at their own warehouses. The customer can access the goods in the consignment warehouse at any time. They are only billed for the goods when they are removed from the warehouse and only for the actual quantity taken.
    consignment stock must be
    Managed separately from the rest of your stock so that you know exactly what stock is stored at the customer location
    Managed separately for each customer
    In inventory management, the consignment stock is managed as special stock in your inventory and is assigned to specific customers. This enables you to keep track of returnable packaging stock by customer.
    If the consignment stocks are not managed by the sold-to party but by a central office, you can use the partner function for special stock partner.
    Prerequisites
    Special Stock Partner
    The special stock partner has been defined for carrying out consignment stock processing by means of a third party rather than the customer. This means you can manage all special stock under one partner. It makes sense to use the special stock partner if your customer is using decentralized order processing but manages consignment stock centrally.
    Inventory Management Using the Special Stock Partner
    If you want to process your consignment goods using a special stock partner, proceed as follows:
    Create a customer master record for the special stock partner (account groups 0001 and DEBI are defined for this purpose in the standard system).
    Enter the special stock partner in the relevant customer master record on the partner screen using the partner function SB.
    When you create an order for this customer, the system automatically proposes the partner function SB in the document header and the document items. Consignment goods which have been entered in a consignment fill-up are always posted to the stock of the special stock partner when goods issue is carried out. You can also enter the partner function SB manually in the document header or in the relevant items if a special stock partner is required and is not proposed from the customer master record. If a special stock partner does not exist in the document header, inventory management is carried out using the sold-to party.
    Process Flow
    There are four main transactions for processing consignment stock in the R/3 System, all of which support separate management of stock:
    Creating a Consignment Fill-Up
    Creating Consignment Issue
    Creating a Consignment Pick-Up
    Displaying Consignment Returns
    Consignment fill-up
    Consignment fill up is used to supplement the customer’s consignment stock.
    Goods issue of the appropriate stock is posted from the unrestricted-use stock to consignment stock (special stock). The goods remain in the possession of the vendor.
    When you ship consignment stock to the customer, you record the transaction by creating a consignment fill-up order (order type KB). As a result, the system carries out the following actions:
    If special stock does not yet exist in your inventory for the customer (or special stock partner), the system creates it when goods issue is posted
    The relevant quantity is removed from regular inventory in your plant and is added to the special stock for the customer. The total valuated stock for the plant remains the same.
    The transaction is not relevant for pricing since the consignment stock remains the property of your company.
    Consignment pick-up
    Consignment issue enables the customer to take consignment goods from the special stock for their use or to sell.
    Consignment issue involves removing the goods from the special stock and making it the property of the customer.
    When the customer removes consignment stock to use or sell, you record the transaction in the system by creating a consignment issue order (order type KE). As a result, the system carries out the following actions:
    When goods issue is posted, the relevant quantity is deducted from both the customer’s special stock and your own total valuated stock.
    The transaction is relevant for pricing since the goods now become the property of the customer.
    Consignment issue
    Any consignment goods stored at the customer’s warehouse that haven’t been used can be reposted to your company’s warehouse with a consignment pick-up.
    If the customer returns consignment stock to you, you record the transaction in the system by creating a consignment pick-up order (order type KA). As a result, the system carries out the following actions:
    When goods issue is posted, the relevant quantity is deducted from the customer’s special stock and is added back into your regular stock at the plant where the goods are returned. Your total valuated stock remains the same since the returned stock was regarded as part of your own inventory even while it was at the customer’s premises.
    This transaction is not relevant for billing.
    Consignment return
    Consignment returns are used for when your customer wants to return goods to the consignment stock.
    If the customer wishes to claim on consignment goods which have already been issued, you can record this transaction by creating a consignment return order (order type KR). As a result, the system carries out the following actions:
    When goods issue is posted, the relevant quantity is added to the customer’s special stock at the plant where the goods are returned
    Since the ownership of the goods is passed from the customer back to your company, the transaction is relevant for billing. In this case, the customer receives a credit memo for the returned goods.
    Depending on the settings in Customizing for Sales, you can create consignment returns with direct reference to a consignment issue. The consignment issue appears in the document flow for the consignment return. This function is not supported in the standard version of the SAP R/3 System.
    When you create consignment returns in the standard version of the SAP R/3 System, the system automatically sets a billing block. To credit a return, you must first approve the request for a credit memo by removing the billing block in the return header. You can control the automatic setting of a billing block in Customizing for Sales.
    The following table provides an overview of the order types used in the standard system for processing consignments:
    Transaction
    Sales order type
    Consignment fill-up
    KB
    Consignment issue
    KE
    Consignment pick-up
    KA
    Consignment return
    KR
    Pricing and Availability Check
    Whether pricing is carried out for the individual transactions depends on the item category. The schedule line category controls the availability check and the transfer of requirements in each of the transactions. The schedule line category itself is determined by the item category and the MRP type of the material. The order types KE and KA check against the consignment stock for the customer involved and order type KB checks against your own plant stock. Requirement records for consignment stock are stored as individual requirements, independently of the setting in the material master

  • So what are the advantages with Intel?

    What are the advantages/disadvantages with these new Intel processors? Sheesh, I just bought a new laptop and now its outdated lol. Looks like I will try to seel this sucker, and buy the new ones when everything seems to stop updating at Apple...

    Basic Advantages... Faster speeds, lower heat. This makes any portable computer very happy.
    Basic Disadvantages... software compatibility problems? Native PowerPC applications now run in a sort of emulation mode. Users may need to migrate to software which runs natively on Intel Macs, or has Universal Binaries available. Could be an additional cost to the user.
    and buy the new ones when everything seems to stop updating at Apple...
    Stops updating?! If you wait for that, you'll never make a purchase. Technology changes very quickly, and it's nearly impossible to have the latest model for any decent length of time before it is updated.
    Keep in mind... when machines get updated, that does NOT mean the previous model is obsolete.
    I'm sure your current computer is still just as good as the day you bought it. No one is forcing you to upgrade.
    If your machine still suits your needs, then stay with it. I'm sure I'll get another 2-3 years of solid happy use from my G4 Powerbook.

  • What are the New Features in Apex 3.1.2 as Comparitive with Apex 3.1

    hi all
    what are the new features in Apex 3.1.2 as compartively with Apex 3.1?
    Is it recommended to use 3.12 comparitivly 3.1?
    please drop ur valuable answers
    many thanks
    khaja
    Edited by: ATM on Dec 27, 2008 1:06 PM
    Edited by: ATM on Dec 27, 2008 1:11 PM
    Edited by: khaja on Jan 18, 2009 10:47 AM

    Hello,
    Versions 3.1.1 and 3.1.2 are actually patched version of APEX 3.1. As such, they don’t introduce new features, but mainly fix bugs from the main release. If you want to learn specific details about these versions, you should read the readme file attached to the patch set files (on metalink).
    It’s always best to work with the latest patched version, as it reduces your chances to encounter bugs. In general, so far the new APEX versions added many new features and technologies, while maintaining backward compatibility, so existing applications functionality is not impaired. Personally, I don’t see any reason not to upgrade and use the latest version, certainly when you are comparing 3.1 to 3.1.2.
    Regards,
    Arie.

  • What are the chances of an N95 Classic Firmware Up...

    Guys,
    Do you think Nokia will continue to support the N95 now that the 8gb version is out? I'm stuck with the phone based on contract and I'm hoping that at least we'll get a hot new firmware.
    What are the chances that they'll release a significantly updated firmware that possibly will free more memory or add that dynamic memory handling of the new software so this thing can be a reliable Ngage gaming device?

    one can be optimistic, and one can be realistic. One can observe the history of Nokia support and draw a conclusion and that would not be an optimistic conclusion. There are plenty of people who have contracts for phones that got a single upgrade if they were lucky. N95 has already had more than that (3?) with the last one dated 5 months ago. The cell phones that get updated are usually not 6 months between updates so every day that passes is like a nail in the coffin. So Nokia has moved on to N95 8GB. Contract has nothing to do with getting Nokia to upgrade firmware however badly it may be needed, contract is about making money for the phone company. The N95 8GB can just as well be called an N95 "i" version, they just didn't name it that. that means N95 "Classic" very likely "left in the dust" as a previous post articulately stated. When I say the I think the chance is zero, it is based on Nokia support history which is woeful

  • What are the problems in Nokia N95 8G ??

    what are the problems in Nokia N95 8G other than cover of camera lens?? thanks very much.

    *** daisy7330 please do not post an off-topic response in a topic not relating to the subject.
    Please post a new topic regarding your problem. ***
    Generally the views I have been seeing about the N95-8GB is its a whole lot better build, and generally better than its baby brother the N95.
    Maybe these links might help?
    http://www.allaboutsymbian.com/reviews/item/Nokia_N95_8GB.php
    http://www.trustedreviews.com/mobile-phones/review/2007/12/16/Nokia-N95-8GB/p1
    http://reviews.cnet.co.uk/mobiles/0,39030107,49294472,00.htm
    Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
    Current: Nokia N900!

  • What are the new features for the latest version ...

    what are the new features for the latest version of N6300? can you cite me the newest features?

    The latest update was just bug fixes and improved stability, no new features. That is nearly always the case with series 40 phones like the 6300.
    Nokia do not make the changelogs available publicly but often they do appear on unofficial sites. Searching google may provide you with more detailed info that cannot be posted here.

Maybe you are looking for

  • Contacts and Calendar not syncing

    I know everyone is having issues with calendar and outlook but I am having an issue with contacts and calendar. Anyone else having an issue with both.

  • Can't open a few files

    I can't open some documents I made in Pages.  The documents can only be found if I click Pages then click "recents" yet even then the documents are gray instead of black and unclickable. If I click at the tab "file" at the top bar of the desktop with

  • Upgrading from FCE to FCP

    Is there any way to upgrade from FCE to FC studio or do I have to buy the whole studio suite? Im running Final Cut Express 2 btw. -Mads Meskalin

  • Day  book  standard  report

    Dear  All can any  one  give  the  list  for  standard  reports  available  for  day book regards sree

  • Full Deployment failing with Transaction timeout

    Hi I am trying to do a full deployment(ATG 10.0.2) and its failing with the same transaction timeout on all environments (local, dev, stage) I have tried to reduce the maxThreads to 1 in DeploymentManager but still i get the same exception. Increment