What are the cases that fit the late 2013 retina display MacBooks?

So I recently bought a late 2013 MacBook Pro Retina Display and I know that they are a little thinner than previous models. I want to know what cases would fit this laptop. My google searching abilities are very low. If anyone can help me please let me know.

It is the width that is more important.
You do not say 13'' or 15''

Similar Messages

What are the main uses for a Macbook Pro, and also for a Macbook Air?

I'm curious of whether I should buy a Macbook Pro, or Macbook Air. Before I make my decision I would like to know what are the main purpaces for each Macbook.

Here's an article that compares the two.
http://news.cnet.com/8301-13579_3-57458148-37/13-inch-macbook-air-vs-13-inch-mac book-pro-which-should-you-buy/?tag=postrtcol;posts

What are the steps to reload my MacBook from a Time Machine back up on a external HD.

Before I upgraded my MacBook to Lion I first used Time Machine to back the OS using a external HD. Not being satisfied with the Lion OS
I want to revert back to the Snow Lepopard. What are the steps to reload my laptop from my external HD?

I tried this but my external drive is not appearing for some reason. Although it is accessible through finder.
Is ther perhaps another way of doing this??
Your help is massively appreciated!!

What are the maximum temperatures for my MacBook Pro?

I have this MacBook Pro (3,1). I know there are maximum temperatures at which the system will shut itself down in order to prevent damage. I know this because I have seen it happen a couple of times
When I run Windows, apparently the OS doesn't care to throttle power in order to reduce dangerous heat like Mac OS X does. I now have a program that monitors CPU and GPU heat when I run Windows 7, and it will sound an alarm if they reach a pre-set ceiling.
My question is, how do I know what the emergency shutdown temperature is so I can set the alarm limit appropriately (low enough to trigger before catastrophe, but high enough that it doesn't trigger when things are still okay)?
This page from Intel seems to be telling me that the CPU should not go above 100°C ...does that seem like the number I'm looking for?
Nvidia doesn't seem to say anything about temperatures on the product page. User forums seem only to speculate on what is or isn't safe with no real specifications to back them up.
How can I find these numbers, either from Intel & Nvidia, or from Apple? Or, is there a general ceiling that I can go by to make sure my alarm warns me before an emergency shutdown?

Amazon Best Sellers: Best Mac Game Controllers
What's the best/most compatible game controller for Mac ...
[OS X] Best Gamepad for Mac? - MacRumors Forums
Ask Engadget: best Mac gamepad?

What are the "other" files on my macbook air HD? They are taking up 52 of the 60gbs. How do i erase these?

My macbook air has a 60gb HD that is currently full. 51 gb is "other" What in the world do i do to fix this?

See here for answer:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html

Macbook pro Late 2013 retina display battery questions and issues

Hi,
So I was a bit suspicious about my macbook pro 2013 13 inch retina display models battery, its the latest macbook pro 13 inch. The website says that it will last for 9 hours but mines lasted for only 6.19 hours. All the apps I used were probably Xcode (doing coding projects), Photoshop, Safari and Notes. I did keep the brightness high and also had bluetooth on for a while. Is this a good battery life for my mac or should I go back to the Apple Store and tell them to fix my battery?
I have all the battery logs below:
Standby Time: 1:13 PM
Battery Percent: 90%
Usage Time Starting: 3:10 PM      Battery Percent: 87%
Usage Time Ending: 4:01 PM      Battery Percent: 75%
Apps Used: Safari, Notes, Xcode,
Usage Time Starting: 5:00 PM       Battery Percent: 74%
Usage Time Ending: 5:56 PM       Battery Percent: 64%
Apps Used: Safari, xcode
Usage Time Starting: 6:53 PM      Battery Percent: 63%
UsageTime Ending: 7:19   PM      Battery Percent: 57%
Apps Used: Safari
Usage Time Starting: 7:46 PM      Battery Percent: 56%
Usage Time Ending: 9:02 PM             Battery Percent: 40%
Apps Used: Photoshop, Safari, xcode
Day 2:
Usage Time Starting: 10:56 AM        Battery Percent: 38%
Usage Time Ending: 11:09 AM     Battery Percent: 39%
Apps Used: Safari
Usage Time Starting: 12:09 PM        Battery Percent: 36%
Usage Time Ending: 12:14    Battery Percent: 35%
Apps Used: Photoshop, Safari
Usage Time Starting: 12:42 PM     Battery Percent: 35%
Usage Time Ending: 3:06     Battery Percent: 4%
Apps Used: Photoshop, Safari
Bluetooth also added using mouse
I wasn't using it for one day straight by the way, I used it for 2 days without charging with these logs.

Fayk1,
carefully review that Web site’s claim; under what conditions does it claim that a charge would last for up to nine hours? (Note those key words — “up to”.) Did your conditions exactly match those conditions? If you want a charge to last as long as possible, then make the display as dim as you can stand it, and minimize your use of Bluetooth and energy-hungry apps like Photoshop and Xcode compilers. To maximize the battery’s life, start recharging it when it gets down to 20%.

What are the best printers multifunctional for MacBooks?

Hello all,
Any recommendations on what printer to buy?
Thanks
Diana1

I have been using the HP LaserJet M1536dnf MFP printer/scanner/fax/copier attached to an ethernet port on my wireless router via Snow Leopard, Lion, and Mountain Lion (all functions currently working over the network), as well as using its AirPrint capabilities from an iPod Touch and iPad. When I got the printer last year I did have to upgrade the firmware, via a USB cable from my Macbook, to get AirPrint support, but I would hope HP is now shipping the printers with that support already included.
This is a networked, Gray Scale Black & White laser printer, with built-in Postscript support.
I lean strongly towards laser printers with Postscript support. 1st because B&W laser printers print longer without running out of toner (except maybe the initial toner cartridge). 2nd, as time goes by, the drivers for the scanner/fax functions may not be updated for an old printer, but generic Postscript drivers are generally always available, so I should be able to at least print to the device for as long as it still works.
If I want something printed in color, I'll take a USB thumb drive to a drug store and get some color prints.

What are the parallels memory requirements for MacBook Pro?

I am looking to buy a new MacBook Pro - either 13 or 15 inch model. I will be running Parallels with Win 8 and MS Office Pro. The 13 inch MBP only comes with 8 GB - the 15 inch with 16 GB, but it is expensive.
Can I get by with 8GB and an i7 processor on the 13 Retina?

Currently Windows in Parallels works fine with 8GB, but now that the RAM limit gloves are off with 64bit processors and operating systems Apple and others are bloating their operating systems and associated programs (like web browsers etc) as to keep the likes of Google's Chrome browser from being turned into a platform.
So in simple terms the 16GB and the better performance of the 15" is going to save you money in the long run as you will have to buy a newer machine less often, also it has a dedicated graphics processor so 3D games and other more intensive graphics can be used. Even for normal use the 15" runs cooler than the 13" as the two heat sources are separate on the logicboard.
The 15" also has a larger screen, so it's easier to use, also it will run more than one operating system a lot better than the 13" will.
Also the 15" will be able to handle more OS X upgrades than the 13" as Apple releases a new one every year or two.

What are the keyboard shortcuts to display on external monitor

Hi
how can i get my laptop to export the image to an external monitor?
I have a MB Pro, and have tried DVI to HDMI direct cable, the supplied DVI-D cable connected to VGA cable and no luck.
the screen on my laptop is flickering and I want to use the external monitor.
Any advice appreciated.
Tks

The typical method is to just plug it in.
If you are using Mini DisplayPort, the adapter must be right at the Mini DisplayPort end, you cannot convert to VGA halfway down the cable.
DVI and Mini DVI provide computer-generated VGA at the computer connector, in the bar at one end and the four pins around it, plus one more from the top row of the grid.
The biggest problem with HDMI is that the display must be "paying attention" and ready to answer when the Mac queries for the name and capabilities.
If your internal display works at all, this can tell you whether the external display has been detected:
About This Mac > ( More info ) > Report > Graphics & Displays

What are the upgrade options for 2008 MacBook Pro A1260

I am curious to see what my options are to upgrade my hard drive compared to upgrading completely to an entirely new computer.
Any suggestions?

Reliable ram: http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade. Very well known vendor, very reasonable prices, and ram comes with a lifetime guarantee. As far as reliable hard drives, I can give you brands that I have had no problems with. Hitachi (still running strong 5 years + in a pc laptop), Samsung, and Western Digital. Here are some reviews on hard drives: http://www.storagereview.com/best_drives

What are the cases that cause the I/O error writing to output file

may i ask what are the cases that cause the I/O error writing to output file ??
cause i have the write path and the input file has data
any ideas???

and the permission is to write first time then append to itBy "permission" is meant the operating system controlled rights that let
particular users do specified things with specified files or directories.
the error message is a the title of the message
I/O error writing to output fileThe java runtime actually creates a much more useful error message than
this but, unfortunately, your program is swallowing this error message and
replacing it with the message you see.
Somewhere in your code you have something like:try {
    // all sorts of stuff goes here
    // including the code that is intended to
    // write to the file
} catch(IOException ioe) {
    System.out.println("I/O error writing to output file");
        // add this line
    //ioe.printStackTrace();
}It might say Exception rather than IOException.
To get a much more useful error message add the commented line.

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

Where can you buy cases that fit the 4S perfectly from?

Most of us know by now that a lot of the iPhone 4 cases, bumpers inpituclar don't quite fit the 4S. Every time you look for a case they all say 4/4S when clearly there is a slight difference. The main one been the silence switch is slightly covered with many cases making it difficult to flick on and off. I know you can get the ones with a big gap on the side that don't cover any of the buttons which are fine, but dose anyone know any sites that are selling cases that have been adjusted to fit the 4S Perfect?
Thanks in advance

Any case that is advertised as fits iPhone 4/4S should work. I know for a fact Otterbox has redesigned their lineup of iPhone cases just for the 4S due to the movement of sensors (and the camera issue). Plus, Otterboxes are great

Please Help! Cases that fit on the 2G still fit on the new touch??

Sorry this isn't a using iPod touch question but i couldn't find another forum so please help! Do the cases that fit on the iPod touch 2nd generation fit on the new 3rd generation? Because I am considering buying a case for my iPod touch 3G that i just ordered. So please HELP! Thank-u!

All the physical dimensions are identical to the 2nd generation.

What are the essential cases where we must have use update module F.M.

Dear sap Friends ,
I want to update or insert bill no. in a ztable when creating bill through VF01 .
I have done it through insert sql query as well as by update module enabled functin module .
what are the essential cases where we must have to use update module enabled functin module and why we use IN UPDATE TASK .
mainly i want to know in which case i must have to use update module enabled functin module and not by insert or modify query used smply .
Thanks ,
Amit Ranjan .

Hi Amit,
I sincerly advice you to search SCN or any anywherelse as big theory is behind this
few related info.
If you are using more than one screen to collect the data to update a perticular table and corresponding underlying table Child table in that case , after every screen change an implicit data base commit takes place and you are still collecting the data from other screens , in such cases you use IN UPDATE TASK
Please go through SAP LUW
Regards
Ramchander Rao.K

What are the cases that fit the late 2013 retina display MacBooks?

Similar Messages

Maybe you are looking for