What are the common methods in the WD Application?

Hi
Please let me know the common methods in the Web Dynpor application
regards
mmukesh

If you create a Application with many DCs, you may have a DC , called common ,DC that makes all common tasks, that every DC needs to do such calling back end for obtaining a list of available Unit of Measure, Currencies, etc.,
a logger can also be in the common DC since most of the DC will use a logger.

Similar Messages

What are the compatible applications to nano 4th gen?

What are the compatible applications to nano 4th gen?

There are no apps that work on the iPod Nano. Apps are exclusive to the iPod Touch and iPhones. You can buy games for your iPod Nano in the iTunes Store though. They're the closest thing to apps for the Nano.

What are the standard Application tool bars used in reports

Hi All,
What are the standard application tool bars used in the report/program?
Thanks in advance
Regards
Chakri

Hi,
Goto SE41,
Programs : SAPLKKBL
Status : STANDARD
Thanks,
Best regards,
Prashant

What are the Application avaliable in Apple Iphone 4s? i wanna that application details?, what are the Application avaliable in Apple Iphone 4s? i wanna that application details?

I wanna know what are the defalut application will come iphone 4s.

So they doing the ye'old monkey in the middle routine, eh? Well I'm not a monkey and neither is anyone else(!)
AT&T is saying they aren't doing it, and that if my phone decides to crap out that I will have to see if Apple will replace my phone. But she said even though they have no involvement nor allowance with this carrier version update, that it is between apple and the federal agency requesting these updates, that she will document and send the complaint to the people at AT&T that are working on carriers updates with them.
I also stated to the rep, that there is some chatter stating the updates are being implemented by AT&T. The rep denied any such information.
I also asked the rep, if there has been any customer complaints or concerns brought to AT&Ts attention today in regards to Carrier Version Updates? The reps response was "no, this is a first"
What I am experiencing: LTE or WiFi: these OTA Forced updates are unexpected and with out advanced notice.
This is the second time I've witnessed this while the device is in use that this OTAFU comes through. There is a data cap on bandwidth, so I think the OTAFU is hogging bandwidth and other resources, which in turn is making any other apps in use choke for bandwidth and other resources while the update is taking place.
I still have the Government Alerts with the 14.2 CU.
I do believe this is IOL and Data Redundancy which is causing technical debt to grow exponentially out of control.
Amber Alerts are great, useful, and helpful - but there is an App for that, a text message, and an email alert system.
Emergency Alerts are great, and useful - BUT there are many apps and signals for that as well as being broadcasted on TV, Radio, FiOS, And Cable.
Simply all too much(!) When is enough enough?
What is the backup system to the government emergency alerts system, if we are unable to access any form of electronic communications?

What are the common error while EBS installation in Unix /windows

what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regards

Hi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios

What are the avlble methods to Measure Quality of Customer Service in SAP

Hi
We are in Retail business, and I would like to know what are the available methods to measure the Quality of Customer service in SAP CRM. Help us to get the required information?
Best regards

Venkat,
there are two aspects to this :
1. The overall philosophy ( for want of a better word ) of QOS for any service - there is a lot of thought that has gone into measuring QOS for a service - hence I would say that QOS is more related to the specific service than the entire domain.
2. Measuring the quality of service in terms of what ? - there are a lot of KPIs for the same some of them could be :
Average time taken to service a customer
Does the customer get all that they want in the store or only some of the items ( partial fill)
Are the products neatly arranged and easy to access
average time taken for the customer to get what h/she needs
customer facilities like parking / childern play area etc
Availability of attendants / helpers for the customer
home delivery
credit options... etc etc and the list could go on endlessly ... as you can see it is very specific to the service being provided and accordingly you will get KPIs for the same.
As for measauring the same - there are umpteen ways to do the samedepending on the place it gets recorded - you can have surveys / web surveys / POS details etc etc - what is it that you are looking for specifically ?
Arun
Hope it helps....
Message was edited by:
Arun Varadarajan

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

What are the best archiving methods for small colleges?

Hi Folks,
Im thinking a few terabyte hard drives will be my best option for a hundred dollars each.
We have a small operation here at a New England college with two editing systems that get a good amount of student use and use by myself for college needs. Some of the student work will get deleted at the end of each semester, but I need to save all the college's video.
What are the best ways to archive? Some of my concerns are cost and space. I can afford a few externals, do any of you have a nice cheap solution?
I understand if I am to go the route of archiving on externals I should have a backup of my backup, do any of you guys have any feedback on ghosting your backups, is that common?
thanks
Mike

If it's JUST for backup (not operation), you can get bare drives and either an enclosure for 1 or 2 drives with no tools trays (like the ones from Sansdigital: about $120 for a 1 drive enclosure) or a device like the UltraDock from Wiebetech (I use the latter). Physically install (or connect in the case of Ultradock) a bare SATA II 3.5" drive, connect it via USB 2, Firewire, esata, initialize/erase it, and then copy your files.
Then store the drive carefully in the foil anti-static bag it came in a dry location where it won't get jostled about by errant students (or kids in my house).
The savings in not getting full drive enclosures in the cost of multiple power supplies and interfaces. You pay for that once with the mountable enclosure / drivedock, and thereafter, just buy bare drives.
I also like another reply: have the students provide drives on which to back up their projects. A friend of mine has a ProTools audio studio, and part of his "set up" charge, is $100 for a bare drive that he will archive for 5 years, or the client can take with him at the end of the project (when the bill is paid).
Eddie O

What are the methods called while navigating from one applet to another one

Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.

http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100

What are the different methods to find the user-exit for any requirement?

Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju Maddi

The following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

What are the methods available to modify standard reports?

What are the methods available to modify standard reports?

<b>Hi,
I think you can copy those reports into Zreports</b>

What are the common APIs we use in oracle interface

What are the common APIs we use in oracle interface,and any APIs are there for validation Of data During Tranfer to interface table.
How to find Api s in oracle applications in Individual modules

For 11i, all public APIS are listed at http://irep.oracle.com
For R12, use the "Integration Repository" responsibility in your R12 instance to list the APIs available in that instance
HTH
Srini

What are the most common questions in the forums?

I have my own ideas about what are the questions we see asked over and over and over again in here. Everyone post your ideas here so we can compile a FAQ and maybe post it somewhere (Virum, your new site? :) )

Please do my homework/coursework/think for me
This has to be by far the most common type of question asked on the forums.
Classpath questions
HashCode questions
Pointer vs Reference Debate (totally spurious but people spew 100's of pages arguing about something that is perfectly obvious)
A very good Thread that is probably 1000's of entries long by now is the
"How to get your questions answered promptly" one (or however this is called). A recap of that published somewhere would be of tremendous value, especially if it was presented as a page you had to go through before landing in the forums to post your latest "Java Challenge" aka "do my coursework" on the boards.

What are the methods to modify SAP standard tables?

hi
what are the methods to modify SAP standard tables?

.APPEND structures AND CUSTOMIZING INCLUDES.
these are the two methods.. but customizing includes we, as a developers do not use.
generally we use .APPEND structures to modify standard tables.
note that we need an access key to modify atandard tables.
we can create an apend structure and add that structure to the standard table at the end.
note that .append structures should only be added only at the end.
that is the reason we use .append structures to modify standard tables.as we should not include a field in the middle and disturb the original order of the standard table fields as it may effect many objects depending on the standard table.
but Some standard tables for which there is a LONG datatype field can never be modified.
the reason is the LONG datatype field should always be there at the end and also .APPEND strutures should always be there at the end. there will be a conflict. so, some standard tables can not be appended.

What are the common errors in reporting and extraction.

hi friends,
what are the common errors in reporting and extraction for implementation and support projects.
thanking u
suneel.

Hi Suneel,
Errors in reporting are like incorrect query creation, errors in creating RKF, CKF and variables, misunderstanding the data, or errors with other tools like broadcasting. Errors in extraction relate to source system connectivity, field-infoobject mapping, incorrect code etc. Also, please search the forums and you will find many real time examples.
Hope this helps...

What are the commonly used customer exits ?

what are the commonly used customer exits in realtime with regard to the modules MM, SD, PP?

SD - MV45AFZZ

What are the common methods in the WD Application?

Similar Messages

Maybe you are looking for