What are the  configuration files ( list them) in DCM repository

DCM Reference Guide says that Configuration information for OHS,OC4J, OC4j applications,OPMN,JAZN are stored in repository. Can any one give me the list of configuration files it is storing? Or How to list them.

betaneptune wrote:
An iMovie project is a bundle?
Yes. What appears in the Finder as a singel file is really a bundle of files.
But what are they?
I can't tell you exactly - but I'm sure there's data there that allows iMovie to undo things you've already done, references the event clips used in the movie, thumbnails, backups, transitions you've used - that kind of thing.
I deleted them on a junk project and so no ill effect, though I didn't check all the things you can do with a project.
Even so, I'd restrict that kind of experimentation to junk projects.
Regardless of whether it's safe to delete them, I'd like to know what they are.
Fair question. I wish I could tell you more.
Matt
Message was edited by: Matthew Morgan

Similar Messages

  • What are the "other" files on the hard drive and how can I reduce them

    Advice please - what are the "other" files on my hard drive and can I reduce or clear them  - currently taking up over 90 gig of disk space

    WZZZ wrote:
    "Other" than what?
    In About This Mac > Storage -
    ...the yellow stuff.
    I believe "Other" is primarily System and System-related files.

  • What are the  configuration tht pi administration have to perform

    hi friends
      i am new to pi can any one help me what are the  configuration tht pi administration have to perform and post installation to be done after installing pi in stand alone box?
    plz help
    thnks
    ravi

    Hi,
    This might help you
    /people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
    Regards
    Agasthuri Doss

  • What are the Jar files required,that for accessing the Type 4 Drivers.

    what are the Jar files required,that for accessing the Type 4 Drivers.
    Regards,

    Well it is Database Specific.
    Howevr there are few 3rd party .jar (Derby) which you can use it for accesing some standard databases.

  • What are the configuration need between R3 and XI when we use RFC sync adap

    hi,
    What are the configuration need between R3 and XI when we use RFC sync adapter.
    Regards
    siva.

    if its the sender adapter ref:
    RFC adapter
    Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    Receiver;
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    Also;
    trouble shooting rfc/soap -
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

  • What are the three drives listed on my iMac?

    Just out of curiosity, what are the three drives listed on my new iMac when one performs the diskutil list command in Terminal?
    More specifically, what is /dev/disk0 ?
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         121.0 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1 says Apple_Boot Recovery HD which makes sense with the new recovery partition.
    /dev/disk2 says Apple_HFS MyDIskName and Logical Volume on disk0s2, disk1s2, followed by a bunch of numbers and characters, then Unlocked Encrypted Fusion Drive. I am assuming tis refers to the actual fusion drive that is mounted on the desktop.
    Thank you very much!

    Amazon has sync software that uses a Cloud Drive as stated at http://appadvice.com/appnn/2013/04/amazon-cloud-drive-sync-arrives-for-mac
    Allan

  • What are the configuration changes required to deploy OEM from one VM host to other?

    Hi,
    I have oem setup on one host and corresponding database is on another host. Now i want to deploy both EM and database setup on another host, so what are the configuration changes required to run the setup.

    Check this link, this may be helpful
    http://docs.oracle.com/cd/E25178_01/doc.1111/e24473/ha_outages.htm

  • What are the configuration steps required ?

    Hi
    Gurus,
    Client requires:
    "We have construction going on at our warehouses and the projects are going
    to take about a year.  We need to track retainers on the payments we make to the contractor. 
    Payments are due in a couple of weeks and it is a priority to monitor progress on the construction."
    Example:
                                                                    GL Account#         
    Debit  Construction In Progress                      122000          100%
    Credit  Vendor                                                601095            90%
    Credit  Accounts Payable / Retainage            202000            10%
    At this time we have a request for a solution to process what is necessary
    to compile with the following scenarios.
    what are the configuration steps required.
    Thanks
    Anil

    Hi,
    Whether the contractors are treated as one time vendors or regular vendors. If you have to create new account group for subcontractors
    Does only one account group related vendors need the retainage analysis or for all the vendors. Will be mainly the general contractors at each location  One group is sufficient even they are at different location you can maintain the same in REGION
    Does only single partial payment exists and the remaining due amount to be treated as due on a particular date or multiple payments exists against the same invoice. The 10% must accumulate in a liability account over the life of the contract and is paid at the end. There may be multiple of payments which you need to knock off against the service entry sheet(study above reply)
    The construction cost which is treated as outstanding to Vendor to be exclusive of the cash expenditure made for such construction. Yes, but the entire 100% needs to debited to CIP Until and unless the work is not completed so how you can treat as outstanding payment to vendor. If you want you can maintain a provision for this
    Check with above and above replies.
    Regards,
    Sankar
    Edited by: Durgasankar.Innamuri on Jul 29, 2010 10:17 AM

  • What are the data files in the Proxies folder?

    In the iMovie Projects folder tree there are folders called Proxies. In that folder there is a folder called the name of the projects events folder, twice, with %20 for spaces and such. In that folder there are a large number of data files like 2010.data and such. What are these data files? In one case there are 861 of them and they take up 5.1 MB. Thanks.

    betaneptune wrote:
    An iMovie project is a bundle?
    Yes. What appears in the Finder as a singel file is really a bundle of files.
    But what are they?
    I can't tell you exactly - but I'm sure there's data there that allows iMovie to undo things you've already done, references the event clips used in the movie, thumbnails, backups, transitions you've used - that kind of thing.
    I deleted them on a junk project and so no ill effect, though I didn't check all the things you can do with a project.
    Even so, I'd restrict that kind of experimentation to junk projects.
    Regardless of whether it's safe to delete them, I'd like to know what they are.
    Fair question. I wish I could tell you more.
    Matt
    Message was edited by: Matthew Morgan

  • Freight Material why it is required and what are the configuration?

    Hi experts,
    My clientsu2019 requirement is they want freight material to be configured in DIEN material type? I want to know why they want this and what are the steps to configure it apart from material master
    Plz need your help
    Thanks
    Krushna

    Hi experts Please need your help

  • What are the configuration steps for cheque process

    hi,
    sap gurus,
    what are the steps for cheque process if our customer wanted to pay by the mode of cheque.
    regards,
    balaji.t
    09990019711.

    Hi,
    Kindly go to OVFD where in you will have to create a new payment procedure if it's not there in standard SAP. Then, you will have to assign this new payment guarantee procedure in customer in sales area data>billing document screen. As far as standard SAP is concerned you will be able to assign the payement by cards in customer master, but for DD process I think you will have to create it.
    Hrishikesh

  • What are the Jar Files required in  J2EE?

    What are the jar s required to work with JMS, Java Mail API and Web Services. (Complete J2EE).

    Depends on your app server. So check with app server

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • Sluggish and then (Not Responding) in RH 8 -- what are the lilo files?

    RH 8 has had severe performance problems with a particular Help Project for the past few days:
    like 3 or 4 words behind my typing.
    not even opening a topic if I click on it
    not closing any of the open topics when I click the X in the topic tab
    Today when it quit working altogether and sent a log file off to Adobe, I peeked into the content before it was sent. I'm using version 8.0.0.203
    Further, a temp directory has 1.35 mb in 178 files all of which read lilo<7-digit number>, all of which were generated today. I know because yesterday I cleaned out my temp directories...including thousands(?) of lilo1515548 files, and today, with virtually no "work" accomplished (outside of publishing to a different server location),  I have a whole new crop. The guts of these files is machine code (squiggles, with telltale references to ColdFusion, JobReady, RoboHelp,RoboInfo,FreeHand, FrameMaker,Homesite,LiveCycle,Flashcast,PostScript etc.). The only Adobe product I have installed* and am using is RoboHelp 8. It makes me wonder...what's going on with RH? Are there product updates I don't know about?
    *except, of course Adobe Reader, but I'm not using that.
    Does RH 8 'get sick' (I am working on a project I created with a try-b4-u-buy version of RH 7. Is this causing the hiccup?
    I found PeterG's suggestion to add the BaseCSS_res.dll to my RH ...\RoboHTML\en_us folder. And that helped A LOT! But I want to know how to address the lilo files that are growing like cancer in my temp folders.
    PS: I cross posted this because the first and only Adobe hit for 'lilo' was in the InDesign SDK. So I posted there first. But, since I'm not using that product nor doing SDK stuff, I'm adding this to the RH user group.

    Hi there
    Where are your projects when you are working on them? Have you applied the patches to version 8? (There have been two released)
    If you say your projects are on a local area network drive, there's your issue. Move them to your local C drive and stand in awe of the speed improvement. (not to mention reliability)
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • What are the weird files that start with ._ that pc users get when I send zips?

    When I send files that I zip using Stuiffit to pc users they get the files plus an equal number of files that start with ._ Does anybody know what these are and how to get rid of them?
    Thanks!
    Karen

    Dot files are invisible files that OS X uses to display positions of files and folders icon for instance when you open a folder.
    That is indeed what a .DS_Store file does, but that's not the ones Bogies is referring to.
    There are various other items that start with a period, such as .Trashes. Every drive gets a trash folder, just as Windows does to each of its drives. While it hides its own trash folders from view, Windows doesn't recognize OS X's version of the trash folder, so you see it.
    But you're likely talking about these. Every file you copy from OS X to a DOS/Windows formatted drive gets a ._ file. The Mac OS has a twin file system; the data fork, and the resource fork. Windows has only a data fork.
    In order for OS X to maintain the resource fork data on a Windows drive, it has to write the resource data as a separate data fork file. So a file named foo.tif will also get a ._foo.tif file on the drive. Mac users don't see them since UNIX automatically hides anything that starts with a period. When you copy the file back to OS X, the data and resource fork info is combined again into a normal Mac file.
    Most of the time, removing these are no big deal. They hold simple data like Type and Creator codes, modification dates, icons, etc. Others, like Mac Type 1 PostScript or Mac legacy TrueType fonts have all of the font data in the resource fork. Delete the ._ files for those types of fonts, and you're left with nothing.

Maybe you are looking for