What are the contents of Mac OS X Install Disc 2

I bought my mac a few years ago, and i recently swiped it and wiped it clean again, to make it faster, which it has. When i was installing the CD's, the install dic 1 was fine, but when it said to insert disc 2 to continue the installation my mac wasn't reading it. Therefore i just did not install it. Yesterday i downloaded the disc 2 online, but i wanted to know what the contents were of disc 2 just so i knew what i had, if anyone could help that would be great

Any download of 10.5 discs online is illegal. The only legal means of getting 10.5 is by DVD. Also any downloaded copies may be pre-release data, or data infected with trojans. Stay far far away from those downloads.

Similar Messages

What are the content conversion parameters

Hi All
This link contains the text file.
http://www.census.gov/foreign-trade/schedules/d/dist.txt
what are the content conversion parameters are required to convert that text to xml.

<sen_dt>
     <prefix>
          <heads>
               <dc>
               <pc>
               <name>
          <main>
               <dcno>
               <pcno>
               <name1>
<rec_dt>
     <prefix>
          <District_code>             District code      optional
          <port_code>              port code          1
          <name>                   name
     <main>
          <District_code_no>
          <port_code_no>
          <name1>
content conversion
     document name:<sen_dt>
     document namespace:http::----
     document offset:--
     recordset name:input
     recordset structure:heads,1,main,*
     recordset sequence:Ascending
     recordset per message:----
     keyfield name:---
prefix.fieldfixedlengths:---
prefix.endSeparator:---
prefix.fieldNames;---
prefix.keyFieldvalue:--
prefix.keyFieldlnStructure:---
main.fieldFixedLengths:9,
main.fieldSeparator:|
main.endSeparator:'nl'
main.fieldNames:district code,port code,name
main.keyFieldValue:
main.keyFieldlnStructure:

What are the content conversion parameters for this structure

Hi All,
The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
Schedule D - District/Port List (by District Code) [Produced13APR11]
District |    Port      |    Name
Code     |    Code      |
01       |              |    PORTLAND, ME
         |    0101      |    PORTLAND, ME
         |    0102      |    BANGOR, ME
         |    0103      |    EASTPORT, ME
         |    0104      |    JACKMAN, ME
         |    0105      |    VANCEBORO, ME
         |    0106      |    HOULTON, ME
         |    0107      |    FORT FAIRFIELD, ME
         |    0108      |    VAN BUREN, ME
         |    0109      |    MADAWASKA, ME
         |    0110      |    FORT KENT, ME
         |    0111      |    BATH, ME
         |    0112      |    BAR HARBOR, ME
         |    0115      |    CALAIS, ME
         |    0118      |    LIMESTONE, ME
         |    0121      |    ROCKLAND, ME
         |    0122      |    JONESPORT, ME
         |    0127      |    BRIDGEWATER, ME
         |    0131      |    PORTSMOUTH, NH
         |    0132      |    BELFAST, ME
         |    0152      |    SEARSPORT, ME
         |    0181      |    LEBANON AIRPORT
         |    0182      |    MANCHESTER USER FEE AIRPORT, NH
02       |              |    ST. ALBANS, VT
         |    0201      |    ST. ALBANS, VT
         |    0203      |    RICHFORD, VT
         |    0206      |    BEECHER FALLS, VT
         |    0207      |    BURLINGTON, VT
         |    0209      |    DERBY LINE, VT
         |    0211      |    NORTON, VT
         |    0212      |    HIGHGATE SPRINGS/ALBURG

since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
Regards,
Ninu

What are the contents in technical spec

what are the contents in technical spec
could u plz explai clearly
with exp spec

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

What are the contents in technical specifications

What are the contents in technical specifications
could u plz explain clearly

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

What are the groups of Mac OS

Hi
Who can explain to me what are the groups "staff", "system", "admin", I saw "wheel" also, and others
What is their meaning and what is their action ?
Thanks

clbobman wrote:
Also to reiterate. I am not part of a NETWORK. I live at home with my wife. Why can I not just be ONE USER! Is it possible?
Hello, clbobman!
Please note that is topic has been dormant for two years. Since few people are likely to still be following it, it would be better to start a new topic of your own if you need help with this, preferably in the forum for the OS version you are using.
With that out of the way, please be aware that you are most certainly part a network. It is the Internet, the largest one on the planet! As was mentioned by several contributors back when this topic was active, users & groups exist largely to protect your privacy & security from the millions & millions of other users who share that vast network with you.
Unfortunately, an ever increasing number of those users are criminals who would like nothing better than for you to run an OS that provided little or nothing to prevent them from taking over control of your computer remotely, stealing the personal & private information you have stored on it & using it however they want, installing software to do their bidding instead of yours, & so on. Even if they aren't completely successful, the attack may leave your system unstable or sluggish, destroy some or all of your document files, or even corrupt the file system so badly that you would have to erase everything & start fresh with a new installation of the OS to recover.
With just one user who has unrestricted access to control everything, that isn't very hard to do. To prevent this (& to prevent users from accidentally doing things with the same result), like in every other modern OS, OS X includes a complex system of permissions to restrict & control access to various parts of the system. In OS X, this is implemented as an abstracted system of users & groups, each given permissions to perform only specific kinds of tasks.
So for example, when a human user like you or me asks the Mac to do something, that request may be handed off to one or more non-human users, each able to handle only part of that task, & relying (like us) on other non-human users to do what it can't.
This compartmentalization makes it very difficult to take over control of the Mac & force it to do things it should not do, whether by accident or intent. It also makes it difficult to understand exactly how it all works. Fortunately, as has already been said, as users we don't need to unless we are intent on changing it. And if we are going to do that, we better have a very good understanding of how it all works. (Otherwise, it is very likely we will just break things, cause data loss, or worse.)
If understanding all that is your goal, Apple's developer web site is full of info you can study, & there are quite a few books on the subject. But be warned, this is not simple stuff. It can take months or years to absorb it all.
That's why most of us leave it to the programmers & just use our Macs to do the stuff we want without worrying too much about how it does that.

What are the contents of ReportViewer.dll that comes with CalExec?

Calibration Executive comes with code module ReportViewer.dll. What are the function prototypes for the routines in this module? There is no information on the exported functions that can be used by another calling program.

Hey TC99
You can use Dependency Walker to find out which functions are in that DLL.

What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

What are the installer(setups) I need to install for webcenter Portal

I use a 32bit laptop now and I want to start working on webcenter portal. What are the applications I need to install in order so I can successfully get my webcenter working. I already have installed Jdeveloper 11.1.1.6.0
Thanks

This depends on what exactly you mean by 'my webcenter'.
If all you want is develop your own webcenter applications (using the WebCenter Framework), you might be good to go only with the webcenter jdev plug-in (see http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml#oracle.webcenter.app). Your apps will be deployed to the integrated WLS. There will be two important missing pieces:
a) WebCenter Content as the document storage (requires also a database)
b) BPEL/BPM as the workflow engine
You might also want to install WebCenter Portal: Spaces, or deploy your apps to a separate WebCenter Portal server (running on its own Weblogic Server).
Optionally, you might also want to utilize other servers contained in the WebCenter Portal license such as Secure Enterprise Search for enterprise searching and/or Oracle Access Manager for enabling single sign-on between the above mentioned components.

What are the differences between Mac Air and Mac Pro?

What are really the main differences between the Macbook Air and the MacBook Pro?
I am thinking of getting a laptop by mac. I like the prices of the Air but the Pro seems better performance.
However my needs are internet, email, word processing and some photos, pictures etc.
would i still be able to do many good applications on the Air vs the Pro?
suggestions please?
thanks

The base model current 2013 Air will perform faster and better in general than the base model 13" non-Retina Macbook Pro.
Ive got both of them.
On the Air:
Faster wifi (by far) 802ac
Faster boot and read/ write due to SSD
Much longer battery life due to Haswell upgrade made in June
Crisper sharper screen, better to stare at for long periods
MUCH FEWER parts to go bad,.....also only one moving part, the Fan
No HD to crash from mechanical failure
Packing the AIr around is a dream since is nearly the weight of an Ipad.
Dont get fooled like most do in seeing the super-skinny AIr as less than a full power machine, ....thats always someones first huge mistake when they see one.
Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
http://www.apple-tubes.com/apple-macbook-air-11-mid-2013-haswell-i5-vs-i7-compar ison/
http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
I5 vs. I7 performance 13” Macbook Air 2013
Boot performance
11.7 I5 ……11.4 I7
Cinebench
1.1 I5….1.41 I7
IMovie Import and Opt.
6.69 I5….5.35 I7
IMovie Export
10.33 I5…8.20 I7
Final Cut Pro X
21.47 I5…17.71 I7
Adobe Lightroom 3 Export
25.8 I5….31.8 I7
Adobe Photoshop CS5 Performance
27.3 I5…22.6 I7

What are the contents of "JAGENT.PRM" file

Hi All,
Can someone post the content of "jagent.prm". After the setup of monitor server and making changes in the config files; the "CREATE DATASTORE" is not creating "jagent.prm" and when i start jagent, it fails with the error "jagent.prm" does not exists.
Can someone copy paste the contents so that i can create this file manually and test whether it works or not.
Regards,
Kamal Khan

hi ,
i have installed GG monitor on my machine and working fine , maximum that will not take morethan a hour.
where you are installing GG monitor in the same oracle GoldenGate instance server or seperate one?
if you in the same machine, check the below list
Did you install JDK 1.6 + in your environment?
did you set the JAVA_HOME and PATH variables?
find below the jagent contents, i have configured on windows machin, find below the jagent.prm file contents,
COMMAND java -jar -Xms64m -Xmx512m dirjar/jagent.jar
the jagent.prm file refering jagent.jar file whivh is in dirjar folder, there are different executable jar files in dirjar folder.
*** dirjar - Contains the Java programs that support the Oracle GoldenGate Agent. This subdirectory is created during installation.
*** dirprm - Contains the Oracle GoldenGate Agent parameter file, jagent.prm.. This subdirectory and parameter file are created during installation of Oracle GoldenGate
11.2.1 and later. Extract, Replicat and Manager parameter files created using GGSCI will also reside in this subdirectory.
creating jagent.prm file manually not a good idea,

What are the contents of a withholding tax return?

A buyer normally deducts WHT and pays the balance to the vendor. The vendor then receives a withholding tax certificate from the buyer.
When the vendor files his withholding tax return, will teh withholding tax return only include details of this WHT deducted by buyer or it will include other things? And against what will the vendor set off the amount withheld by the buyer?

Hey TC99
You can use Dependency Walker to find out which functions are in that DLL.

What are the differences between mac and pc versions of elements 12

I am a Mac user and have been disappointed at some of the limitations of elements 11 on my Mac versus what I understand you can do on a pc. Have these issues been corrected for Mac users in elements 12? Thanks

I have to say that I find it really amusing when people who don't use a specific feature for a software program automatically criticize people who do need and/or use it. I realize that many people have different workflows, and some people use certain features often, whereas other people don't use those features at all. It doesn't mean that the feature should not be in the program. Having said that, I find watched folders to be indispensable for my workflow. In addition to photography, I do a lot of graphic design work. I use Photoshop Elements mainly for organizing all of my image files. I use the full version of Photoshop for most of my photo editing and graphic design work. I build most graphic design projects from the ground up in Photoshop. On the pc, once I initially saved the graphic design file, it would automatically be imported into the organizer for me. Any edits I made to photgraphs and then saved as psd files were also imported automatically into the organizer. As it stands now, I have to remember to (and sometimes hunt around for) any of these files after the fact so that I can import them in to the organizer. With 3 kids running around my house, I am often interrupted while working, and forget to immediately import the files into the organizer. It is a real pain in the neck for me to have to go back and search for files, sometimes weeks after I have created them. I really liked the way it worked on my pc and don't understand why it isn't available on the Mac. Lightroom has a version of the watched folder (though it moves files out of that folder upon import) and a synchronize folders function (though not automatic, and might take a while for a large catalog), both available on the Mac, so I would think that it's not really a Mac limitation. Then again, I'm not a programmer, and I know that something that seems like a small fix to me may require a huge amount of coding to accomplish. I just wish Adobe would tell me if this is NEVER going to happen, so that I can move on and establish a new workflow.

What are the RFC LON ON DETAILS IN INSTALATION?

HI ALL in my systm sap bw instalation i got aerror at the RFC LOG ON DETAILS USER NAME :: DDIC, PASSWORD ________:
WHAT IS STHE PASSWORD I WILL FILL

Hi ,
You got that error at the time when u making connection between R3 to BW ??????
If yes then You should fill up user name and password which have Admin access.

After dropping a list of .xpi files into install-dir \extensions, Firefox is completely oblivious I want them installed. What are the magic words to make FF install my addons?

I want to install addons for multiple users. So I used Windows Easy Transfer to copy a fully-built profile, including all APPDATA but my extensions weren't included. I threw my collection of .xpi files into the FF extensions directory and restarted FF - nothing. Made sure my user had admin rights, restarted FF - nothing.

I want to install addons for multiple users. So I used Windows Easy Transfer to copy a fully-built profile, including all APPDATA but my extensions weren't included. I threw my collection of .xpi files into the FF extensions directory and restarted FF - nothing. Made sure my user had admin rights, restarted FF - nothing.

What are the contents of Mac OS X Install Disc 2

Similar Messages

Maybe you are looking for