What are the correct privileges for Wheel in address book.app 5.0.3?

I think I messed with the privileges for Wheel in Address Book.app 5.0.3. Can anyone tell me if it should be set to Read only or to Read & Write?
Scared to close the info window until I have sorted this out!

Similar Messages

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

What are the correct steps for installing Oracle Entitlement Server SSM?

Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

What are the correct steps for installing SP1 over Sharepoint 2010

Hi,
I have SharePoint 2010 (Release To Manufacturing) environment and am planning to to upgrade it to SP1. May I please know the correct steps
to install SP1 on to my environment(2WFE + 2APP servers & 64 bit OS).

SP2 provides key updates and fixes across our servers, services and applications including security,
stability, and performance enhancements and provides better compatibility with Windows 8, Internet Explorer 10, Office 2013, and SharePoint 2013.
also your Sharepoint is upto date version, you will get all the functionality which
you will losing since you are prior to SP1.
i.e Site Recycle bin,
Content Deployment fixes, . you can go throw all the kB articles which will tell you what fixes in it.
http://blogs.technet.com/b/stefan_gossner/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What are the correct permissions for the Home folder?

Since buying my first mac (G4 iMac) I've since bought 2 other macs & transferred my home folder from the older computer each time. Since then I've messed around with the permissions of the Home folder a few times to try share files & folders between my Windows PCs. So the permissions of the Home folder on all computers could be messed up a little.
I want to set up permissions how they should be set up as default.
I created another user account with admin priveliges & it looks like the Home folder should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: Read only
Others: Read only
And the sub folders (Documents, Pictures etc.) should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: No access
Others: No accesss
Is this correct, & if so shall I just set permissions on my Home folder exactly the same as the new account I set up?
Or is there some way of resetting permissions for the Home folder?
(I know repairing permissions with Disk Utility doesn't do this).
Power Mac G5 Dual 2.3, 2.5 GB RAM, 20 Cinema Display | MacBook Pro 2.0 15" Mac OS X (10.4.6)

Mac OS X does not have a built-in way of doing this, but you can make one yourself. Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
do shell script "chmod 755 ~"
try
do shell script "chmod 700 ~/Desktop"
end try
try
do shell script "chmod 700 ~/Documents"
end try
try
do shell script "chmod 700 ~/Library"
end try
try
do shell script "chmod 700 ~/Music"
end try
try
do shell script "chmod 700 ~/Pictures"
end try
try
do shell script "chmod 755 ~/Public"
end try
try
do shell script "chmod 755 ~/Sites"
end try
This script can be saved as an application, which makes it possible to fix the permissions on a home folder with two clicks. The try statements are included so that the script will run if a folder doesn't exist. If the ~ object is a symbolic link, the permissions on it may not be changed; you can use the code block
tell application "Finder"
set the_home to POSIX path of (home as alias)
end tell
do shell script ("chmod 755 " & the_home)
in this case. The rest of the script works as before.
(12450)

What are the correct settings for my wireless-n router?

I was just upgraded at home with a Huawei HG8245 Fiber Optic Wireless-N router. The default Setting is:
WPA/WPA2 Pre-Share, TKIP/AES, Auto Channel and 20Mhz Channel Width.
I cannot surf past 10 feet from the router. I switched the Security to TKIP, and it goes to Wireless-G and I can surf all around my apartment. I did AES only, goes back to Wireless-N, and again the 10 feet issue. Selected WPA2 only...same thing.
Any ideas or solutions?
Paul

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

What are the strange files in Application Support Address Book

I want to backup my Application Support Address Book Folder. It contains dozens of these files, which take up a lot of space. Do I need them?
AddressBook-v22.abcddb.597384F6-9A17-48CA-8C30-54FB5CDA9D1E.unknown-shm
Migration%2020140823132315-308.abbu.tbz

As Miss Emily was wont to say, "Never mind."
http://kb2.adobe.com/cps/407/kb407726.html

GTX680-Mac_What are the Correct Drivers for 10.8.5?

GTX680 on MacPro5, mid 2010.... and having issues. What are the correct drivers for Mac GeForce GTX680? And is there another driver for the OS as well? Or not in use when using GTX?
I can not export without my system completely shutting down....many attempts...AME and direct. Using CUDA.
Phil

I'm not sure of the proper process to post crash logs so apologize for long text...but I am really needing help
MacPro5, mid 2010
OS 10.8.5 Mtn Lion
PPro 2014_2 build 8.2
64 GB RAM
current Cuda: 6.5.37
GTX680-2GB RAM
3min seq...5760x864...I know large. Edit clips...mostly mp4 with lots of repo and scaling but no other FX. Export to h284 or mp4 crashes system...tried OpenCL...CUDA...AME and Direct...but some success (vry slow) with softwr only. Can not export. Did cineform in 30sec chunk and struggle thru it.
Tried different CUDA versions...reinstalled CC2014_2
Any ideas?
Here is one of the many logs:
Interval Since Last Panic Report: 263815 sec
Panics Since Last Report:          5
Anonymous UUID:                    AD95F73E-7904-DFA2-7B2C-2376C652F401
Tue Jan 20 20:29:34 2015
panic(cpu 2 caller 0xffffff8002eb8945): Kernel trap at 0xffffff7f844b4633, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000008, CR3: 0x0000000191d2f011, CR4: 0x00000000000206e0
RAX: 0xffffff8080325628, RBX: 0xffffff807b2fae00, RCX: 0x0000000000000000, RDX: 0xffffff87093e3778
RSP: 0xffffff87093e3740, RBP: 0xffffff87093e37b0, RSI: 0xffffff87093e3778, RDI: 0x0000000000000001
R8: 0xffffff87093e32a0, R9: 0xffffff87093e3298, R10: 0xffffff8080325608, R11: 0x0000000000000000
R12: 0xffffff80783064c0, R13: 0xffffff80783064b0, R14: 0xffffff808e702608, R15: 0xffffff8078306400
RFL: 0x0000000000010283, RIP: 0xffffff7f844b4633, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff87093e33e0 : 0xffffff8002e1d636
0xffffff87093e3450 : 0xffffff8002eb8945
0xffffff87093e3620 : 0xffffff8002ecebfd
0xffffff87093e3640 : 0xffffff7f844b4633
0xffffff87093e37b0 : 0xffffff7f844b38f4
0xffffff87093e3860 : 0xffffff7f844c0668
0xffffff87093e38d0 : 0xffffff7f84486c60
0xffffff87093e3910 : 0xffffff7f8447c20f
0xffffff87093e3a90 : 0xffffff7f844a8a0b
0xffffff87093e3b50 : 0xffffff7f8447aea1
0xffffff87093e3ba0 : 0xffffff800326f789
0xffffff87093e3bc0 : 0xffffff8003270d30
0xffffff87093e3c20 : 0xffffff800326e74f
0xffffff87093e3d70 : 0xffffff8002e98c21
0xffffff87093e3e80 : 0xffffff8002e20b4d
0xffffff87093e3eb0 : 0xffffff8002e10448
0xffffff87093e3f00 : 0xffffff8002e1961b
0xffffff87093e3f70 : 0xffffff8002ea6546
0xffffff87093e3fb0 : 0xffffff8002ecf473
      Kernel Extensions in backtrace:
         com.apple.GeForceWeb(8.1.7)[B1C23155-23F5-39D0-8037-7FFB273DA8C6]@0xffffff7f84469000->0xf fffff7f84534fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff7f83417000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xffffff7f835b c000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0xffffff7f8 3579000
            dependency: com.apple.NVDAResmanWeb(8.1.7)[CA80D169-93F0-36E0-AAD0-9A255D45C036]@0xffffff7f835d0000
BSD process name corresponding to current thread: Adobe Premiere P
Boot args: nvda_drv=1 darkwake=8
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000002c00000
Kernel text base: 0xffffff8002e00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 1380434831924
last loaded kext at 248531634318: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f84f9a000, size 65536)
last unloaded kext at 308976154466: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f84f9a000, size 57344)
loaded kexts:
com.nvidia.CUDA 1.1.0
com.paceap.kext.pacesupport.snowleopard 5.8
com.Cycling74.driver.Soundflower 1.6.6
com.logmein.driver.LogMeInSoundDriver 1.0.3
com.rogueamoeba.HermesAudio 4.1.0
com.sonnettech.driver.SonnetSATA 2.2.9
com.owc.driver.Accelsior 1.0 b2
com.apple.filesystems.smbfs 1.8.4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.1.7f2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.13.14
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.GeForceWeb 8.1.7
com.apple.driver.AppleMikeyDriver 2.4.7fc4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUSBAttachedSCSI 1.0.4
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBHub 635.4.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.Intel82574L 2.3.0b5
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleUSBXHCI 635.4.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f2
com.apple.nvidia.gk100halWeb 8.1.7
com.apple.NVDAResmanWeb 8.1.7
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.6
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.5
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 530.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 64 GB, SMC 1.39f11
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM 1, 16 GB, DDR3 ECC, 1066 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: DIMM 2, 16 GB, DDR3 ECC, 1066 MHz, 0x8394, 0x393731393830410000000000000000000000
Memory Module: DIMM 5, 16 GB, DDR3 ECC, 1066 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: DIMM 6, 16 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54343247523741465234432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 2 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: FireWire, FireWire, fw0
PCI Card: NVIDIA GeForce GTX 680, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: pci1b73,1100, Slot-2
PCI Card: pci1b4b,9230, sppci_ahci, Slot-3
PCI Card: Sonnet Tempo SATA E4P, sppci_ide, Slot-4
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: OWC Mercury Accelsior PCIe SSD, 119.88 GB
Serial ATA Device: Hitachi HDS723020BLA642, 4 TB
Serial ATA Device: WDC WD1001FALS-41Y6A0, 1 TB
Serial ATA Device: Samsung SSD 840 EVO 500GB, 500.11 GB
Serial ATA Device: MARVELL VIRTUALL
USB Device: G-RAID, 0x4971, 0x8027, 0x07400000 / 3
USB Device: G-RAID, 0x4971, 0x8027, 0x07200000 / 2
USB Device: G-RAID, 0x4971, 0x8027, 0x07100000 / 1
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa200000 / 2
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa220000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
USB Device: CTH-670, 0x056a (WACOM Co., Ltd.), 0x00df, 0x1d100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50a, 0x3d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed

What Are The Correct Gray OS X Discs For This Imac?

I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
There has to be a serial or model number right? I have Leopard installed on it and I missing having the DVD player so could I connect the iMac to my PowerMac G5 using Target Disc Mode, and then install Panther or Tiger onto the iMac through it?

Liquidus wrote:
I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
The correct Mac OS restore discs are Mac OS X 10.1.2 and Mac OS 9.2.2. I have restore discs for a 600MHz Late 2001 iMac G3, which has the same identical software as the iMac G4. That part number for the disc set is 603-0372.
For the second part of your question, you can install Panther or Tiger through Target Disc Mode from your PM G5.
-Brian

What are the correct answers ?

after doing one sample swing application, i assumed the exam will be easy. when i took the exam, i couldn't do anything...
what are the correct answers ??/
Which one of the following converts the Image i into the BufferedImage bi?
Choice 1
bi = new BufferedImage(0, 0, BufferedImage.TYPE_INT_RGB);
Graphics2D g = (Graphics2D)bi.createGraphics();
g.drawImage(i,i.getHeight(this),i.getWidth(this));
Choice 2
bi = new BufferedImage(i.getWidth(this), i.getHeight(this), 1);
bi.drawImage(i,0,0,this);
Choice 3
bi = new BufferedImage(i.getWidth(this), i.getHeight(this), 1);
Graphics2D g = (Graphics2D)bi.createGraphics();
g.drawImage(i,0,0,this);
Choice 4
bi = new BufferedImage(i, i.getWidth(this), i.getHeight(this), BufferedImage.TYPE_INT_RGB);
Choice 5
bi = new BufferedImage(i, i.getWidth(this), i.getHeight(this));
CardLayout
BorderLayout
FlowLayout
GridBagLayout
GridLayout
Which one of the following indicates all of the layout managers (from the list above) that allow you to set the space between the components from an instance of the LayoutManager itself?
Choice 1
CardLayout, FlowLayout, GridBagLayout, GridLayout
Choice 2
GridBagLayout
Choice 3
BorderLayout, GridLayout
Choice 4
BorderLayout, FlowLayout, GridLayout
Choice 5
BorderLayout, CardLayout, FlowLayout, GridBagLayout, GridLayout
JFrame jf = new JFrame();
jf.setSize(400,400);
JTextField jtf = new JTextField("JTextField");
JButton jb = new JButton("JButton");
jf.getContentPane().setLayout(
                      new FlowLayout(FlowLayout.LEFT,1,2));
jf.getContentPane().add(jtf);
jf.getContentPane().add(jb);
Which one of the following indicates the positions of the JTextField jtf and JButton jb relative to the JFrame and each other?
Choice 1
jtf and jb are in the top-center of the Jframe; jtf is to the left of jb, 2 pixels apart.
Choice 2
jb is in the top-right corner of the JFrame with jtf 1 pixel to the left of it.
Choice 3
jtf is in the top-left corner of the JFrame with jb 1 pixel to the right of it.
Choice 4
jb is in the top-right corner of the JFrame with jtf 2 pixels to the left of it.
Choice 5
jtf is in the top-left corner of the JFrame with jb 2 pixels to the right of it
public void drawText(Graphics2D g, String text){
Font f = new Font("Century Gothic", Font.BOLD, 10);
g.setFont(f);
g.drawString(text, 20, 20);
Given the above sample code, what happens if the "Century Gothic" font is NOT available?
Choice 1
The Font() constructor fails, causing "f" to be null, and the setFont() method throws a NullPointerException.
Choice 2
"Century Gothic" is a built in Java font, which always exists within the Java runtime environment.
Choice 3
The code does not compile because only the following "logical" font names are supported in Java: Dialog, DialogInput, Monospaced, Serif, SansSerif, and Symbol.
Choice 4
The Font() constructor throws an IllegalArgumentException.
Choice 5
A default Font object is returned and is used
Sample Code
public void drawText(Graphics2D g, String text){
Font f = new Font("Century Gothic", Font.BOLD, 10);
g.setFont(f);
g.drawString(text, 20, 20);
Given the above sample code, what happens if the "Century Gothic" font is NOT available?
Choice 1
The Font() constructor fails, causing "f" to be null, and the setFont() method throws a NullPointerException.
Choice 2
"Century Gothic" is a built in Java font, which always exists within the Java runtime environment.
Choice 3
The code does not compile because only the following "logical" font names are supported in Java: Dialog, DialogInput, Monospaced, Serif, SansSerif, and Symbol.
Choice 4
The Font() constructor throws an IllegalArgumentException.
Choice 5
A default Font object is returned and is used.
How must do you interact with a JTextField in order to generate an ActionEvent?
Choice 1
Tab into the JTextField from another Component.
Choice 2
Type in the JTextField.
Choice 3
Activate the cursor in the JTextField.
Choice 4
Hit <RETURN> while the cursor is in the JTextField.
Choice 5
Hit the spacebar while typing in the JTextField.
double-buffering
public class TimerTest implements ActionListener{
public static void main(String[] args){
    TimerTest test = new TimerTest();
    javax.swing.Timer timer = new javax.swing.Timer(100,test);
public void actionPerformed(ActionEvent ev){
    System.out.println("Timer ticked.");
Given the above sample code, what is the result when the code is run?
Choice 1
The words "Timer ticked." are printed to the console once after 100 milliseconds.
Choice 2
The words "Timer ticked." are printed to the console every 100 microseconds.
Choice 3
The words "Timer ticked." are printed to the console every 100 seconds.
Choice 4
The words "Timer ticked." are printed to the console every 100 milliseconds.
Choice 5
Nothing, the Timer is not started.
1. JSlider slider1 = new JSlider (JSlider.VERTICAL, 0, 100, 50);
2. slider1.setPaintTicks(false);
3. slider1.setMajorTickSpacing(10);
4. slider1.setMinorTickSpacing(2);
What changes do you have to make to the above Sample code so that there are six Major Ticks and four Minor ticks between each Major Tick?
Choice 1
Replace line 3 with slider1.setMajorTickSpacing(17);
Choice 2
Replace line 2 with slider1.setPaintTicks(true);
Replace line 3 with slider1.setMajorTickSpacing(17);
Replace line 4 with slider1.setMinorTickSpacing(5);
Choice 3
Replace line 3 with slider1.setMajorTickSpacing(5);
Replace line 4 with slider1.setMinorTickSpacing(4);
Choice 4
Replace line 2 with slider1.setPaintTicks(true);
Replace line 3 with slider1.setMajorTickSpacing(20);
Replace line 4 with slider1.setMinorTickSpacing(4);
Choice 5
Replace line 4 with slider1.setMinorTickSpacing(6);
   Which one of the following defines a set of three JRadioButtons (b1, b2, and b3) so that only one JRadioButton can be selected at a time?
Choice 1
ButtonGroup g = new ButtonGroup();
g.add(b1); g.add(b2); g.add(b3);
Choice 2
b1.group(true); b2.group(true); b3.group(true);
Choice 3
JRadioButton jbs[] = {b1, b2, b3};
ButtonGroup g = new ButtonGroup(jbs);
Choice 4
The default behavior of JRadioButtons is such that only one can be selected at a time as long as they are in the same Container.
Choice 5
ButtonGroup g = new ButtonGroup(b1, b2, b3);
Sample Code
public static void main(String args[]){
What is the role of the method in the code above?
Choice 1
To provide a place for initialization code when instantiating the current class.
Choice 2
It is the first method run when a class is run with the Java Interpreter.
Choice 3
It serves no specific function. It is a residual method from Java 1.0.
Choice 4
It is the first method that the Java Compiler converts to bytecode when creating a .class file.
Choice 5
To process command-line parameters when running the Java Interpreter
How do you create a menu item, Save, with a shortcut key of Ctrl+S?
Choice 1
You have to override the KeyPressed event of the top level Frame and handle the Ctrl+S to call the menu item's actionPerformed.
Choice 2
JMenuItem save = new JMenuItem("Save");
save.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,Event.CTRL_MASK));
Choice 3
JMenuItem save = new JMenuItem("Save");
save.enableShortcut(KeyEvent.CTRL_KEY + KeyEvent.S);
Choice 4
JMenuItem save = new JMenuItem("Save");
save.setMnemonic("Ctrl+S");
Choice 5
JMenuItem save = new JMenuItem("Save");
save.addShortcutKey( new KeyStroke(KeyStroke.S | KeyStroke.CTRL_KEY) );
GridBagConstraints gbc1 = new GridBagConstraints(1,1,2,1,1,3,10,1,new Insets(5,5,5,5),1,1);
gbl.addLayoutComponent(jb,gbc1);
In regards to the above code, which one of the following indicates jb's grid position?
Choice 1
Grid position 2,1
Choice 2
Grid position 1,2
Choice 3
Grid position 1, 1
Choice 4
Grid position 10, 1
Choice 5
Grid position 1, 3
GridBagConstraints gbc1 = new GridBagConstraints(1,1,2,1,1,3,10,1,new Insets(5,5,5,5),1,1);
gbl.addLayoutComponent(jb,gbc1);
In regards to the above code, which one of the following indicates jb's grid position?
Choice 1
Grid position 2,1
Choice 2
Grid position 1,2
Choice 3
Grid position 1, 1
Choice 4
Grid position 10, 1
Choice 5
Grid position 1, 3
Which one of the following is necessary when changing an Applet to a standalone application?
Choice 1
Add a no-argument constructor.
Choice 2
Remove the init(), start() and stop() methods.
Choice 3
Remove "extends JApplet" or "extends Applet".
Choice 4
Add a main() method.
Choice 5
Change the import statement so that it imports an Application container rather than Applet or JApplet.
Which one of the following adds the String "Java" to the JComboBox jcb?
Choice 1
ComboBoxModel cbm = jcb.getModel();
cbm.addItem("Java");
Choice 2
jcb.setText("Java");
Choice 3
ComboBoxModel cbm = jcb.getModel();
cbm.add("Java");
Choice 4
jcb.add("Java");
Choice 5
jcb.addItem("Java");

I'll have a go but I am not saying they are all correct...
Question 1.
Which one of the following converts the Image i into the BufferedImage bi?
Choice 3 (assuming this implements the imageobserver interface)
bi = new BufferedImage(i.getWidth(this), i.getHeight(this), 1); //1 is BufferedImage.TYPE_INT_RGB
Graphics2D g = (Graphics2D)
bi.createGraphics();
g.drawImage(i,0,0,this);Good luck with your homework...
nes
Question 2.
CardLayout
BorderLayout
FlowLayout
GridBagLayout
GridLayout
Which one of the following indicates all of the layout managers (from the list above) that allow you to set the space between the components from an instance of the LayoutManager itself?
Choice 4
BorderLayout,
FlowLayout,
GridLayout
(GridBagLayout uses GridBagConstraints to decide component spacing, card layout does not provided component spacing due to the deck nature used)
Question 3.
JFrame jf = new JFrame();
jf.setSize(400,400);
JTextField jtf = new JTextField("JTextField");
JButton jb = new JButton("JButton");
jf.getContentPane().setLayout( new FlowLayout(FlowLayout.LEFT,1,2));
jf.getContentPane().add(jtf);
jf.getContentPane().add(jb);    Which one of the following indicates the positions of the JTextField jtf and JButton jb relative to the JFrame and each other?
Choice 3 jtf is in the top-left corner of the JFrame with jb 1 pixel to the right of it.
Question 4
public void drawText(Graphics2D g, String text)
     Font f = new Font("Century Gothic", Font.BOLD, 10);
     g.setFont(f);
     g.drawString(text, 20, 20);
}    Given the above sample code, what happens if the "Century Gothic" font is NOT available?
Choice 5 A default Font object is returned and is used
Question 5.
How must do you interact with a JTextField in order to generate an ActionEvent?
Choice 4 Hit <RETURN> while the cursor is in the JTextField.
Question 6.
public class TimerTest implements ActionListener
     public static void main(String[] args)
           TimerTest test = new TimerTest();
           javax.swing.Timer timer = new javax.swing.Timer(100,test);
     public void actionPerformed(ActionEvent ev)
          System.out.println("Timer ticked.");
}    Given the above sample code, what is the result when the code is run?
Choice 5 Nothing, the Timer is not started.
Question 7.
1. JSlider slider1 = new JSlider (JSlider.VERTICAL, 0, 100, 50);
2. slider1.setPaintTicks(false);
3. slider1.setMajorTickSpacing(10);
4. slider1.setMinorTickSpacing(2);    What changes do you have to make to the above Sample code so that there are six Major Ticks and four Minor ticks between each Major Tick?
Choice 4 Replace line 2 with slider1.setPaintTicks(true); Replace line 3 with slider1.setMajorTickSpacing(20); Replace line 4 with slider1.setMinorTickSpacing(4);
Question 8.
Which one of the following defines a set of three JRadioButtons (b1, b2, and b3) so that only one JRadioButton can be selected at a time?
Choice 1 ButtonGroup g = new ButtonGroup(); g.add(b1); g.add(b2); g.add(b3);
Question 9.
Sample Code
public static void main(String args[]){ }
TYPO - should be public static void main(String[] args){ }
What is the role of the method in the code above?
Choice 2 It is the first method run when a class is run with the Java Interpreter.
Question 10.
How do you create a menu item, Save, with a shortcut key of Ctrl+S?
Choice 2 JMenuItem save = new JMenuItem("Save");
save.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,Event.CTRL_MASK));
Question 11.
GridBagConstraints gbc1 = new GridBagConstraints(1,1,2,1,1,3,10,1,new Insets(5,5,5,5),1,1); gbl.addLayoutComponent(jb,gbc1);
In regards to the above code, which one of the following indicates jb's grid position?
Choice 3 Grid position 1, 1
Question 12
Which one of the following is necessary when changing an Applet to a standalone application?
Choice 1 Add a no-argument constructor.
Choice 2 Remove the init(), start() and stop() methods.
Choice 3 Remove "extends JApplet" or "extends Applet".
Choice 4 Add a main() method.
Choice 5 Change the import statement so that it imports an Application container rather than Applet or JApplet.
mmm. not a good choice of answers. look at the following link...
http://forum.java.sun.com/thread.jsp?forum=57&thread=218096
Question 13.
Which one of the following adds the String "Java" to the JComboBox jcb?
Choice 5 jcb.addItem("Java");

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

What are the best settings for ripping cd's in the AAC format?

I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

mysteryroach wrote:
My questions are: What are the best settings for ripping cd's in the AAC format?
It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
Yes. Just put them in a playlist and burn.
Does the AAC format have VBR like the MP3 format?
Yes. You will see it as an option in the Import Settings.
Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

What are the installation steps for Oracle Fusion HCM

Hi all
I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
Thanks

If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
Atul has also posted some good stuff on installing:
http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

What are the correct privileges for Wheel in address book.app 5.0.3?

Similar Messages

Maybe you are looking for