What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

Similar Messages

Which are the correct settings for gmail in MacBookPro

I want to use mac mail to access my gmail. Can I ? instead of going directly to web to access my gmail.? Which are the correct settings for the incoming and outgoing servers ?

Hi,
Yes. You can absolutely access your Gmail account from within either Mail or Microsoft Outlook for Mac. Make sure, that you have enabled POP/IMAP in your Gmail settings, then follow the instructions here: http://mail.google.com/support/bin/answer.py?hl=en&answer=180188 if you wish to access your account via POP3 instead of IMAP, change the incoming mail server to pop.gmail.com
Regards,
Gábor

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

HT1277 i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline

i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline can anyone help

If you can receive mail and your connection to your ISP is otherwise working, but cannot send mail, then your SMTP settings are incorrect; the SMTP server port is wrong, your SSL setting is wrong, or the username or password credentials don't match what the ISP has, or your attempted accesses are being blocked or your ISP SMTP server is offline.
And in general, don't use port 25 for your outbound mail, unless your ISP specifically requires that; these days, that port is best left to communications between mail servers and (usually) not used by any mail clients.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

Check the account settings for the outgoing server "(null)"?

I try to send emails to myself with the attachment of a picture so I can view it on my computer without having to plug it in, because it is synced with another computer. However every time I have tried to send a photo it is unable to send, and it says 'Check the account settings for the outgoing server "(null)"'
Can anybody help and tell me what this means?
Thanks

That means you have an error in the setting for the outgoing server.
You need to correct that error.

What are Novells recommended settings for policies

Hello,
Who can tell me please what are Novells recommended settings for policies? Should we make a few big Policy where everything is handled (for example a policy for standalone workstations, one for desktop PCs, one for notebooks etc..) or single policies (for example "Desktop Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window minimizing mouse gesture" and so on) and put them in a PolicyGroup. What is the best way?

The fewer the policies the better.
Generally Folks do something such as a WS assigned policy as a baseline
and then a user one to over-ride.
Trying to create one policy per setting would likely cause windows great
confusion as well as being very slow.
On 3/14/2011 7:36 AM, Schneekette wrote:
>
> Hello,
>
> Who can tell me please what are Novells recommended settings for
> policies? Should we make a few big Policy where everything is handled
> (for example a policy for standalone workstations, one for desktop PCs,
> one for notebooks etc..) or single policies (for example "Desktop
> Wallpaper", "Enable Active Desktop", or "Turn off Aero Shake window
> minimizing mouse gesture" and so on) and put them in a PolicyGroup. What
> is the best way?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

What is the exact error message you are receiving? Have you checked to make sure the connections on each end of the USB cable are nice and snug?
B-rock

How can I get the shutter count for my Canon 7D Mark II using Windows XP?

How can I get the shutter count for my Canon 7D Mark II using Windows XP? I've been looking lots of places and doing some file uploads, but I can't seem to find anything. I'm wary of downloading software I know nothing about. Any help is greatly appreciated.
Solved!
Go to Solution.

Nevermind, just, sort of answered my own question. Doesn't work on XP, but using a Win 7 'puter I was able to use Shutter Count, which now works w/ the 7D Mark II.

[svn:fx-trunk] 7801: Submit on behalf of Pete - an update to the project settings for the flex4test project , the link type was wrong.

Revision: 7801
Author:   [email protected]
Date:     2009-06-12 14:38:25 -0700 (Fri, 12 Jun 2009)
Log Message:
Submit on behalf of Pete - an update to the project settings for the flex4test project, the link type was wrong.
Doc Notes: None
Bugs: None
Reviewer: none
tests: compile & run
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4test/.actionScriptProperties

Wait a second...there is more to that error message that I overlooked before.
There might be something other than just the way I set the CODE and CODEBASE parameters wrong here
Any ideas?
Here is the entire messsage:
load: class DisplayMonoApplet.class not found.
java.lang.ClassNotFoundException: DisplayMonoApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

Can someone tell me the correct driver for the fuji xerox docuprint p205b for os x as the one on the fuji site does not work thank you!

I am desperate to find the correct driver for the p205b docuprint priner i know that the one on the fuji site is wrong and you need to install a driver for anothe rmodel as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from, help !!! =)

I have the same printer and I'm using Lion 10.7.4.
I'm facing problems getting the mac to print via wireless.
I've installed the driver from http://support.apple.com/kb/DL904 as suggested by sig.
I've linked up the printer to the router via usb. It works like a charm with usb on Lion and wireless on windows.
Could anybody help ? I've included photos for more information. Many thanks.

Can't setup Gmail account - "Mail couldn't discover the account settings for the Mail server "

Since upgrading to Yosemite I can't add one of my gmail accounts.
It's my business domain which is hosted with GMAIL. It worked before the upgrade. Now adding the email address in 'internet accounts setup' I get the message "Can't setup Gmail account - "Mail couldn't discover the account settings for the Mail server "
Mail will not let me setup an email account directly in mail either.
There seems to be major problems with mail in this update.
Also SMTP keeps failing.
Yosemite is a disaster.

Try this. I saw this solution elsewhere on the boards here.
When setting up a business gmail account, something other than @gmail.com, when you try to add the account in Mail preferences, don't select Google as the account type. Choose, "Other." Fill out the name, email and password as usual. Worked great for me after having similar issues trying to get my business gmail account to work in Yosemite.

Problem: Mail couldn't discover the account settings for the Mail server "Unknown"

I have a problem setting up my internet accounts on the System Preferences.
This message always comes up,
Mail couldn't discover the account settings for the Mail server “Unknown”.
Thanks

In Mail's Add Account dialog, enter the account information, then hold down the option key and click Continue. Finish setting up the account manually.

CONFUSION ON WHAT IS THIS NOTEBOOK SO TO GET THE CORRECT DRIVER FOR THE SOUND CHIP

THE BOTTOM OF THIS NOTEBOOK SAYSIT IS:
PRODUCT: HP PAVILION dv 1000
SN#[Personal Information Removed]
PN# PM054UA#ABA
NOW WHEN I PUT IN THE PN# IT BRINGS UP
HP Pavilion dv1040us Notebook PC Drivers
IS IT POSSABLE THAT THIS WAS BUILT AT THE TIME OF THIS CHANGE. THE SOUND DRIVER FOR THE 1000 DOES NOT MAKE A CHANGE AND THERE IS NO SOUND BY THE BUILT IN HARMAN/KARDON OR HEADPHONES.
MAYBE IT IS A BURNT OUT CHIP AND IF SO WHAT SOFTWARE CAN I USE TO TEST THIS?
I HAVE TRIED ALL I KNOW AND AM OPEN TO SUGGESTIONS. DO I CHANCE USING THE DRIVERS FOR THE 1040?
THANKING ANYONE FOR ANY SUGGESTIONS. J
This question was solved.
View Solution.

Hi,
The following link shows the specs of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00247186
Yes, it is a dv1040us and its product number is PM054UA#ABA. Tis must be very old machine because I can't find more than:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=43374...
For sound, please try Conexant CX20468-31 AC97 Audio Driver:
http://ftp.hp.com/pub/softpaq/sp28001-28500/sp28481.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What are the correct settings for the Canon 5D mark II in FCP 7 ?

Similar Messages

Maybe you are looking for