WHAT ARE THE CORROSION STANDARDS FOLLOWED BY NATIONAL INSTRUMENTS PRODUCTS?
DOES THE PRODUCTS OF NATIONAL INSTRUMENTS FOLLOWS ANY CORROSION STANDARDS LIKE ISAG3 OR SIMILAR TYPES?
Hi,
I was very astonished today to find such files in forms90 directory on my w2k box, so I tried to figure out where they come from. I've checked my config files just to make sure that logging and tracing is disabled. workingDirectory parameter in formsweb.cgf is not set. I can confirm most of what Yong Huan says except of the first 8 bytes of these files. Some of these files have x47 and x08 followed by six x00.
However, I did some testing and found out that an empty file is created when a user runs a form with a multi-line block, executes a query, navigates to the last record using pagedown-key and pressing pagedown-key again and again (about 3 or 4 times). The file remains empty. If the user ends his forms-session, the file is deleted. I have not found out yet under which circumstances data is being written to that file.
It would be nice if someone else could confirm this, and it would be very nice if someone from Oracle could comment on this.
Gerald
Similar Messages
-
What are the coding standards we need to follow?
While developing SAPUI5 applications what are the coding standards we need to follow.
Hi,
Refer SAPUI5 SDK - Demo Kit
Regards,
Chandra -
What are the steps u followed in your project
Hi....
he asked me like this
1...what are the steps u followed in your project?
thanks and regards,
k.swaminath reddy.Hi,
1.Discovery of problems
2. Expectations
3.develop solutions...
4.Implement Solution...
4.1 Installation
4.2 Testing
4.3Training
4.4Support
5.Project Closedown -
What are the main instruction followed in flatfile for hierarchy
what are the main instruction followed in flatfile for hierarchy
Hi,
If you want to load InfoObjects in hierarchy form, you have to activate the indicator With Hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the entire hierarchy or the hierarchy structure is to be time-dependent, whether intervals are permitted in the hierarchy, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
The detailed procedure is listed in the link below
http://help.sap.com/saphelp_bw33/helpdata/en/b0/ab8e3cb4340b14e10000000a114084/frameset.htm
Remya -
What are the important standard table use in FI/CO module?
What are the important standard table use in FI/CO module?
Moderator Message: Please avoid asking such queries.
Edited by: kishan P on Jan 24, 2012 12:37 PMHi Sanj,
Please go through the available information and then you can ask if there is any queries.
[Google|http://www.google.co.in/search?sourceid=chrome&ie=UTF-8&q=importanttablesinficoin+sap]
Regards,
Madhu. -
What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009
I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??
A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS. -
What are the SAP standard programs?
Hi PM Guys,
I have a question that is as below:-
We have the following Master Data:
1) Functional Location
2) Equipment
3) Equipment BOM
4) Counter
5) Catalog Profiles
6) Task List
a) General Task List
b) Equipment Task List
7) Maintenance Plans
a) Time Based
b) Performance Based
Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
Thanks in Advance,
Vijaya KrishnaHI
you can find the standard program while executing the T code LSMW itself.
type LSMW ,specify the description in the next screen select the <b>Standard batch or direct input</b> under the heading you can find the in the field <b>object</b> use F4 to find all the standard programs in SAP
0400 Equipment
0410 Message (IH)
0420 Confirmation (IH)
0425 Measuring point
0430 Measurement Documen
0440 Functional location
0450 Object link
0460 Maintenance plan
0470 Equipment task list
0480 FnctnlLoc.TaskList
0490 Gen.task list
regards
thyagarjan -
What are the steps to follow before disabling iCloud?
After working a while with my iMac running Mountain Lion in combination with iCloud, I have to disable iCloud because I'm going across the ocean for a while. I don't want to end up with a huge bill because every time I use my iPhone, it will sync (while no Wi-Fi available).
As a matter of fact, I already archived my Contacs, Calanders and Reminders (Notes doesn't have such a feature), but it seems to put everything back to the iCloud account after importing.
My question is: What is the step-by-step approach to disable iCloud (both iPhone and iMac) without losing any data?
Many thanks in advance!
Cheers,
GJThanks a lot, mende1!
It works. (Only Notes is set up differently, but that's not a real issue for me.)
If I do the same on my iMac, I don't get that question. Is there a possibility to restore these data from my iPhone to my iMac? -
What are the current standard delivered PCRs in MSS?
I am confused about the standard, out-of-the box PCRs in the latest version of MSS? Can anyone give me the list of them? I'm thinking there are only 4 or 5?
Thanks much,
CassyThere are 11 <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/b0/398d406b305537e10000000a1550b0/content.htm">Delivered PCR Scenarios</a> in MSS.
~Suresh -
What are the reasons for following Javascript error in Report Viewer
Post Author: dhuka
CA Forum: Crystal Reports
Hello Everybody!
I am using Crystal Reports 10 in my web application. But unfortunately I am surrounded with strange problem related to it because of which I have been unable to deploy is on client-side. In my application the error given below is displayed as javascript error in Report Viewer and report is not displayed. But more frustrating part is that I am getting the same error due to different problem with reporting and I am stuck with it as I am unable to figure out what's causing the error now. Earlier this error appeared due to problem with parameter passing to stored procedure which I resolved it and error vanished but once again it has shown up. Moreover this error now appears less frequently and randomly therefore it is even difficult to trace the cause.
Problem with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
Line: 40Char: 12Error: Expected ')'Code: 0URL: http://myServer/myApp/myForms/myReports/ReportViewer.aspx
So can anybody tell me what factors might be causing this errors as the error text is very vague in nature and gives no idea about the actual error.
Guys, I hope for your kind co-operation.
Regards,Post Author: dhuka
CA Forum: Crystal Reports
Thanks for you reply Krishna.
But this syntax error is the one that is creating problem for me as I cannot trace it. The form ReportViewer.aspx contains only a report viewer object which remains un-binded to any ReportDocument even at runtime.
At code behind ReportViewer.aspx I have code below that associates SQL Stored Procedure Parameter and Report Filter along with report name. Once all above is associated with ReportDocument, I export ReportDocument to PDF file format and display the report. Here I dont' even bind ReportDocument with my ReportViewer. Moreover, as I mentioned previously this error is encountered randomly (with no reasonable explanation so far) on client PC (while browsing through application).
I hope below code give you good idea of the way I am implementing my reporting.
Looking forward to you solution. Please note that I am only passing the ReportFileName and Parameter and Filter Criteria to this form while dataTable by itself using the connection information.
<<<<<<<<<<<<<<<<<CODE BEHIND of REPORTVIEWER.ASPX>>>>>>>>>>>
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim strKeys() As String
Dim strReportFilter As String
Dim strReportName As String
Dim strError As structError
Try
ReDim strKeys(0)
If strReportName = "" Then
strReportName = Context.Session("ReportName").ToString()
If Not Session("ReportParameters") = Nothing Then
Dim char_Delimiter() As Char = ";".ToCharArray()
strKeys = Session("ReportParameters").ToString().Split(char_Delimiter)
End If
If Not Session("ReportFilter") = Nothing Then
strReportFilter = Session("ReportFilter").ToString()
End If
Else
Session("DataTable") = Nothing
End If
If Not ViewParameterReport(strReportName, strKeys, strReportFilter, strError) Then
ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
Exit Sub
End If
Catch ex As Exception
strError.strMsg = Err.Description
ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
Finally
End Try
End Sub
Private Function ViewParameterReport(ByVal str_ReportName As String, ByVal str_ReportParameters() As String, ByVal strReportFilter As String, ByRef strError As structError) As Boolean
Dim str_ReportPath As String = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
Dim crLogInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
Try
str_ReportPath = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
o_Rpt = New CrystalDecisions.CrystalReports.Engine.ReportDocument
o_Rpt.Load(str_ReportPath & "\rpts\" & str_ReportName)
If Context.Session("DataTable") = "" Then
crLogInfo = New TableLogOnInfo()
crConnectionInfo = New ConnectionInfo()
crLogInfo = o_Rpt.Database.Tables(0).LogOnInfo
crConnectionInfo = o_Rpt.Database.Tables(0).LogOnInfo.ConnectionInfo
clsDbCnn.SetDBProperties()
crConnectionInfo.ServerName = clsDbCnn.Server
crConnectionInfo.DatabaseName = clsDbCnn.Database
crConnectionInfo.UserID = clsDbCnn.UserID
crConnectionInfo.Password = clsDbCnn.Password
crLogInfo.ConnectionInfo = crConnectionInfo
o_Rpt.Database.Tables(0).ApplyLogOnInfo(crLogInfo)
Else
ds_MISReports = New DataSet()
ds_MISReports = CType(Session("DataTable"), DataSet)
o_Rpt.SetDataSource(ds_MISReports)
End If
If Not IsPostBack Then
Dim param_Fields As CrystalDecisions.Shared.ParameterFields = New ParameterFields()
Dim iCount As Integer
If str_ReportParameters.GetUpperBound(0) <> 0 Then
For iCount = 0 To str_ReportParameters.Length - 1 Step 2
o_Rpt.SetParameterValue(CStr(str_ReportParameters(iCount).ToString()), CStr(str_ReportParameters(iCount + 1).ToString()))
Next
o_Rpt.RecordSelectionFormula = strReportFilter
End If
End If
'crViewer.DisplayGroupTree = False
'crViewer.ReportSource = o_Rpt
SetDBLogonForReport(crConnectionInfo, o_Rpt)
Dim TargetFileName As String
Dim fs As System.IO.FileStream
Dim FileSize As Long
Dim GenDS As DataSet
'Dim oRD As New ReportDocument()
Dim crReportObject As CrystalDecisions.CrystalReports.Engine.ReportObject()
Dim oExO As ExportOptions
Dim oExDo As New DiskFileDestinationOptions()
'Build Target Filename
TargetFileName = str_ReportPath & "\Pdfs\" & Session.SessionID & ".pdf"
'Export to PDF
oExDo.DiskFileName = TargetFileName
oExO = o_Rpt.ExportOptions
oExO.ExportDestinationType = ExportDestinationType.DiskFile
oExO.ExportFormatType = ExportFormatType.PortableDocFormat
oExO.DestinationOptions = oExDo
o_Rpt.Export()
o_Rpt.Close()
'Send the file to the user that made the request
Response.Clear()
Response.Buffer = True
Response.AddHeader("Content-Type", "application/pdf")
Response.AddHeader("Content-Disposition", "attachment;filename=MyReport.pdf;")
fs = New System.IO.FileStream(TargetFileName, IO.FileMode.Open)
FileSize = fs.Length
Dim bBuffer(CInt(FileSize)) As Byte
fs.Read(bBuffer, 0, CInt(FileSize))
fs.Close()
Response.BinaryWrite(bBuffer)
Response.Flush()
Response.Close()
o_Rpt = Nothing
Return True
Catch ex As Exception
strError.strMsg = Err.Description
Return False
Finally
crConnectionInfo = Nothing
crLogInfo = Nothing
End Try
End Function
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, _
ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
Dim count As Integer
For count = 0 To myTables.Count - 1
Dim myTableLogonInfo As TableLogOnInfo = myTables(count).LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTables(count).ApplyLogOnInfo(myTableLogonInfo)
myTables(count).Location = myConnectionInfo.DatabaseName & ".dbo." & myTables(count).Location.Substring(myTables(count).Location.LastIndexOf(".") + 1)
myTables(count).LogOnInfo.ConnectionInfo.ServerName = myConnectionInfo.ServerName()
Next
End Sub -
What are the steps we follow while customizing the Deltas in Bw side
Hi All,
I had a query regarding the customization of deltas in BW side after replicating from R/3.
thanks and regards
kabirHi,
In order to customize the deltas for the different DS are depends upon the type of the DS you are using for ex. if it is from LO cockpit then you need to take care of
the delta setups but you can do the setting for Jobs.
In case if you have any generic DS you can customize the delta at RSO2 transaction by selecting the one of the delta feild from the DS..
Hope this helps..
assign points if useful.
Cheers,
Pattan. -
What are the best ways to recycle used Apple products?
I currently have a iPhone 4 (32 GB, Black) and a Macbook Pro (Mid-2009, 2.53 GHz, 250 GB storage, 4 GB memory) that I don't use anymore. I'm looking into recycling them or selling them but I'm not sure about:
a) What the products are worth - the iPhone looks brand new and the Macbook Pro is in fair condition but needs a battery replacement
b) Which recycling programs to go with - Apple's PowerON program has shady reviews and I'm not sure whether to trust sites like 'gazelle'
If anyone has any advice on recycling or selling their Apple products, let me know. Thanks!jess_ek,
To get an idea of what the products are worth, take a look at recent winning bids on online auction sites for identical items to yours in similar condition.
If you prefer to recycle rather than to sell, you could donate them to iFixit, which will make maximum use of their parts to help keep other iPhones and MacBook Pros running. If you’d prefer to sell them, you could offer them as individual lots on online auction sites, or advertise them for sale on online classified ad sites. -
What are the standard Solutions available for Complaints Management in CRM?
Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin -
Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefinedEvery time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
Set of string into array or a table....
Hi Experts, I am using Oracle 10G, where I need to accomplish a task... I am getting a set of string of the sort "|session_id~q_id~q_key~rt_id~rt_key~request_type~field_id|session_id~q_id~q_key~rt_id~rt_key~request_type~field_id| ....." Here, as you
-
Creating a tcode for form reports
Hello Experts, I need to create a transaction code for a report created with FSI2. I took the name of the program that this report had generated and created a t-code. My problem is that the selection screen using the t-code that I created with the on
-
A way to reuse existing classes instead of generating the stub ones?
Hello to all, I am using eclipse and weblogic 10.3 as an application server. I have a 1st project deployed with some exposed web services. I need to access these services from a 2nd project, so i run the clientgen ant task, which generates the client
-
SapScript 'MAIN' Window without 'Text Element'
Why is it, if we run 'MAIN' Window without defining 'Text Element'(/E), it displays the contents twice.. The same doesn't happens with other 'Variable' windows..
-
HT4583 Why do some paid apps had iAds too?
I recently down loaded and paid for this app for my 2 year old https://itunes.apple.com/nz/app/butterflies-iblower/id336910288?mt=8 It has iAds in it!!! So useless for a 2 year old as the flashing candy crush ad is just as appealing as the butterfly