What are the counter channels on PXIe-6361 pin-out diagram
Hello,
I defined three counters channels using DAQ assistant for the PXIe-6361 board (ctr0, ctr1, ctr2). I did not see explicit labels on the pin-out diagram for the PXIe-6361 card that indicate where these counters are. Can anyone point me out what are the pins / labels on the pin-out diagram for these counters?
Thanks much
Solved!
Go to Solution.
Hi Larrage,
The best way to find the default pins is using the DAQmx Help file. You can reach this in MAX by clicking on Help>>Help Topics>>NI-DAQmx>>NI-DAQmx Help. In the help file, you can search for "Connecting Counter Signals" and select the link for the series card you have (X Series in this case).
In your case, the default counter output terminals for ctr0, ctr1, and ctr2 would be PFI 12, PFI 13, and PFI 14, respectively. The counter inputs (for counting edges) would be PFI 8, PFI 3, and PFI 0 for the same counters. You can change the input/output terminals for counters in your VI or MAX, but these are the defaults for the card.
Zach P.
Product Support Engineer | LabVIEW R&D | National Instruments
Similar Messages
-
What are the support or replacement options for my out of warranty phone?
My beloved 3G, that I use now as a jump drive and an iPod, just died. Dead dead. No response from any buttons, no reset ability, no restoring... Nothing, other than if i charge it it gets really hot. Really really hot.
I have purchased two MacBooks, four iPhones and one iPad over the past three years for myself and my family, and I am wondering what support apple will offer me for my new doorstop. I know it won't be free and I understand that..... But????? Anything? Anyone know? Can I upgrade? Replace? Repair?
Thanks in advance.There is nothing special provided in this regard regardless how many Apple products you have purchased over the last 3 years.
Apple offers an out of warranty or not covered under the warrant "repair" price, which pays for an exchange for the same model at a significantly reduced price off what was the full retail sales price. The cost is $199 plus applicable sales tax and the exchange will include a 90 day warranty. This does not require signing a new two year contract with AT&T. This will be for another 3G - the same color and storage capacity. Not sure if Apple offers this for an iPhone that is no longer activated with AT&T, but as already provided, there will be no charge at an Apple store to have a diagnostic check run on your iPhone to determine where the problem lies. If only the battery, Apple has a price to replace the battery only, or you can use a 3rd party for this, or try to do it yourself if you are so inclined.
http://www.apple.com/support/iphone/service/faq/#warranty7 -
What are the iTunes digital audio levels in and out
I am having a lot of trouble with finding out and setting the audio levels in and out of iTunes.
Digital audio has 16bits at '1' with an analog signal level of +12dB, 24bit has all'1's at +18dB. Making the overhead capability for CD 16bit 12dB and that for HD 24bit 18dB.
I would like to record (using SoundStudio) a set of standard audio tones from 20-20kHz with digital levels of "all 1's" 16bit, or +12 dB analog level, "all 1's" 24bit ditto, and the same for levels of analog 0dB (-12dB digital) for 16bit and 0dB(-18dB digital) for 24bit.
What I am finding is that if I get Sound Studio to inert a tone at what it calls 0dB, save it as AIFF, then the output it from iTunes I get a much higher level, around +8dB or so!
Any ideas?As an addition to my first question. I asked the makers of Sound Studio about levels. They tell me that the Mac standard is to have all '1's in the digital stream defined as 0dB.
Which helps as I can now record a tone at the CD level of -12dB and the HD audio level of -18dB. And if I make recordings I know to keep the input levels well into the green, not yellow and definitely not up to the red.
As you say the output of iTunes is boosted, and from my measurements this boost is in the analog circuitry and is about +8dB.
I woul dnot recommend turing down the iTunes volume control as this brings in the digital volume reduction, which depends on the algorithm they have implemented. This is not so bad for iTunes as the Audio Core software works at 32bit and can handle 16bit volume changes fairly well. But on the iPad it is different as iOS is only 16bit audio so the volume algorithm is poor. So always leave the volume at maximum and turn down your HiFi volume control!
Or use a digital output to an external DAC as the iTunes volume control is then disabled. Set Audio MIDI for 24bit output and you are ready to go with HD Audio. -
What are the events of lsmw?
what are the events of lsmw?
hi,
Check out these:
Processing time Meaning Default setting
__BEGIN_OF_PROCESSING__ Before the beginning of
data processing
(blank)
__BEGIN_OF_TRANSACTION__ Before the beginning of
transaction data
processing
(blank)
__BEGIN_OF_RECORD__ Before applying the
conversion rules for a
source structure
Initialize the structure <segment>
(Name of target structure)
Batch Input, Direct Input:
<segment> = init_<segment>.
BAPI, IDoc:
g_edidd_segnam = '...'.
g_edidd_segnum = '....'.
g_edidd_psgnum = '......'.
g_edidd_hlevel = '..'.
Clear <segment>.
__END_OF_RECORD After applying the
conversion rules for a
source structure
Transfer_record.
__END_OF_TRANSACTION__ After finishing transaction
processing
Transfer_transaction.
__END_OF_PROCESSING__ After finishing data
processing
(blank)
transfer_record. Transfers the current record (i.e. for the current target
structure) to the output buffer.
transfer_this_record '...'. Transfers a record of another target structure to the output
buffer. The name of the target structure has to be specified as
argument in single quotes.
at_first_transfer_record. Transfers the current record to the output buffer, if it is the first
transaction.
on_change_transfer_record. Transfers the current record to the output buffer, if it has
changed compared to the last record.
transfer_transaction. Writes the current transaction to an output file. All records of
Legacy System Migration Workbench
38
the output buffer are transferred to the output file.
skip_record. The current record is not transferred to the output buffer.
skip_transaction. The current transaction is not written to the output file. -
What are the units of the DAQmx counter?
Hello,
I created this VI and several similar ones a few months ago, but, I have forgotten some of what I did back then. I believe that this VI should measure period, using the counter on the DAQ chassis. Can anyone tell me the units of the period measured? I think it is seconds, but, I am trying to figure out how to figure that out! The values of the period are generated by the DAQmx READ function in the WHILE loop. What units is that function outputting to the array? What are the units of the array elements, essentially? See the attached VI.
Also, how do you know? I opened the DETAILED HELP for the DAQmx Read (Counter 1D DBL NSamp) shown in the VI but, I can't find anything on the units of the data coming out of the terminal labeled DATA with the orange wire, which is actually an array of periods, and we take the average of the most recent 15 or so period measurements.
I had a suggestion months ago for an online NI manual containing a description of Buffered EdgeCounting measurements, but, when I went to find it, the link had been changed by NI, so, I can't find that manual, but, I think the answer is probably there, because I recall that manual being very useful when I did this before.
Thanks for the guidance.
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum Nov 13.vi 33 KBHI dav2010,
When you create a Virtual Channel, you should specify the units the counter task will use. There are several options which are listed in the help here:
http://zone.ni.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxcreatechannel/#DAQmxCreateChannel%28CI...
I am not on a computer with LabVIEW right now, but I believe the default should be ticks, which is the number of ticks of your device's timebase. You can find that information in your hardware specifications.
Regards,
Chris E.
Applications Engineer
National Instruments
http://www.ni.com/support -
what are the frequencies all versions of the iPhone 6 and what are they used for (e.g. GSM, 3G, LTE, WIFI, Bluetooth,etc...) provided with channel numbers per frequency.
Click here
-
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?
• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN -
Full bkp currently running, what are the files that are already backed up?
DB Version:10.2.0.4
OS : Solaris 10
Full backup of a huge database (1.5 TB with 540 datafiles) is currently underway. We are getting messages like
input datafile fno=00021 name=+DGDATA1/fn_lmdata.dbf
input datafile fno=00052 name=+DGDATA1/fn_675.dbf
input datafile fno=00059 name=+DGDATA1/fn_binc.dbf
input datafile fno=00160 name=+DGDATA1/fn_mbi.dbf
channel s2: starting piece 1 at 27-DEC-10
channel s1: finished piece 1 at 27-DEC-10
piece handle=/rmanbkp/opnli_stm0jhlr_1_1.rmbk tag=TAG20101227T063256 comment=NONE
channel s1: backup set complete, elapsed time: 02:16:18
channel s1: starting full datafile backupset
channel s1: specifying datafile(s) in backupset
input datafile fno=00095 name=+DGDATA1/cti_87.dbf
input datafile fno=00062 name=+DGDATA1/fn_ws_test.dbf
input datafile fno=00326 name=+DGDATA1/fn_tr_test.dbf
input datafile fno=00213 name=+DGDATA1/harp_934.dbf
input datafile fno=00188 name=+DGDATA1/fn_test_demo2.dbf
.The files are not backed up alphabetically. We would like to know what are the db files that are already backed up? Is there a command i could run from another RMAN to get the already backed up files.I think you can query your catalog for this information.
Or use
LIST BACKUP; (in RMAN)
Or
alter session set nls_date_format='dd/mm/yy hh24:mi:ss';
select SID, START_TIME,TOTALWORK, sofar, (sofar/totalwork) * 100 done,
sysdate + TIME_REMAINING/3600/24 end_at
from v$session_longops
where totalwork > sofar
AND opname NOT LIKE '%aggregate%'
AND opname like 'RMAN%';
Or
-- Datafiles Backed up during past 24 Hours
SELECT dbfiles||' from '||numfiles "Datafiles backed up",
cfiles "Control Files backed up", spfiles "SPFiles backed up"
FROM (select count(*) numfiles from sys.v_$datafile),
(select count(*) dbfiles
from sys.v_$backup_datafile a, sys.v_$datafile b
where a.file# = b.file#
and a.completion_time > sysdate - 1),
(select count(*) cfiles from sys.v_$backup_datafile
where file# = 0 and completion_time > sysdate - 1),
(select count(*) spfiles from sys.v_$backup_spfile
where completion_time > sysdate - 1) -
How to find out what are the interfaces used for Job and Job Codes
HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
SunnyHi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
What are the features of blackberry pearl 9100?
what are the features of blackberry pearl 9100?
lalitive, please don't ask vague questions like this. There are too many features to list here and you certainly know how to use google.com for a search, don't you?
Likewise, there are various models of the Pearl. Which as you asking about?
http://us.blackberry.com/smartphones.html#
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
What are the T-codes that contain the master data for material and vendor?
what are the T-codes that contain the master data for material and vendor?
hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat. -
What are the Master data that should be uploaded for Go live
Can any one tell me what are the SD master data that should be uploaded during GO live
Hi Prem,
SD Master data includes:
- Customer Master data
- Material Master data
- Customer-Material Info records
- Enterprise Structure info (Dist Channels,Divisions etc)
- Condition Master Data in Pricing.
I believe, all these need to be uploaded during GO Live.
regards,
Raj -
What are the major features of a BB 10 phone
What are the major features of a BB 10 phone, is it a smartphone?
You can read for yourself here:
http://us.blackberry.com/smartphones/blackberry-z10/overview.html
and
http://blogs.blackberry.com/2013/03/blackberry-10-reviews/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
What are the classes used for bropdownListBox in BSP and purpose and how
what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar ShuklaBenje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments -
What are the differnet type of tables in mdm ?
hi experts i am new to mdm. just i have refered some documents in that the have created some table and fileds ,taxnomy,lokups,.......
so can any one give me the bref ida on
what is mdm ?
what are the different type of tables in mdm ? What is the requirement for the selection of table?
what is a feld ? what are the diff type of fealds in mdm ? And requriement ?
what is taxnomay ? And Requriement or where or when we can use ?
what is lookups in mdm ? what is lookup tables in mdm ?
what is mdm console ?
what is mdm data manager. ?
what is mdm import manager ?
what is mdm syndicator ?
please any body answer this questions .Hello Praveen,
Below are the the all possible links of books,articles... etc for MDM.
http://hosteddocs.ittoolbox.com/RD021507b.pdf
demo
http://www.sap.com/community/int/innovation/esoa/demo/MDM_demo/index.html
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=3431&PortalId=0
MDM
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=1666&PortalId=0
SAP Netweaver MDM Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09b548d-7316-2a10-1fbb-894c838d8079
SAP NETWEAVER MDM Leverage MDM in ERP Environments - An Evolutionary Approach -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4059f477-7316-2a10-5fa1-88417f98ca93
Master Data Management architecture patterns
http://www-128.ibm.com/developerworks/db2/library/techarticle/dm-0703sauter/
MDM and Enterprise SOA
http://www.saplounge.be/Files/media/pdf/Lagae---MDM-and-Enterprise-SOA2007.10.10.pdf
Effective Hierarchy Management Using SAP NetWeaver MDM for Retail
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ee0c9e-29a8-2910-8d93-ad34ec8af09b
MDM World
http://mdm.sitacorp.com/
MDM: Master Data for Global business
http://www.sitacorp.com/mdm.html
MDM Master Data Management Hub Architecture
http://blogs.msdn.com/rogerwolterblog/archive/2007/01/02/mdm-master-data-management-hub-architecture.aspx
Improve Efficiency and Data Governance with SAP NetWeaver MDM
http://www.sapnetweavermagazine.com/archive/Volume_03_(2007)/Issue_02_(Spring)/v3i2a12.cfm?session=
Data Modeling i MDM
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-31279471c9758576df
SRM-MDM Catalog
http://help.sap.com/saphelp_srmmdm10/helpdata/en/44/ec6f42f6e341aae10000000a114a6b/frameset.htm
http://events.techtarget.com/mdm-ent/?Offer=DMwn716mdm
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721869
http://searchdatamanagement.bitpipe.com/data/search?site=sdmgt&cr=bpres&cg=VENDOR&sp=site_abbrev%Asdmgt&cp=bpres&st=1&qt=MasterDataManagement
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721819
http://www.dmreview.com/channels/master_data_management.html
http://searchdatamanagement.techtarget.com/originalContent/0,289142,sid91_gci1287620,00.html?bucket=NEWS&topic=307330
MDM Console -- http://help.sap.com/saphelp_mdmgds55/helpdata/en/88/9f9c427055c66ae10000000a155106/frameset.htm
MDM Import manager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/120367f94c3e92e10000000a1553f6/frameset.htm
MDM DataManager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
MDM Syndicator --http://help.sap.com/saphelp_mdmgds55/helpdata/EN/43/5fe0e8a55f5f6be10000000a1553f6/frameset.htm
Rgds
Ankit
Maybe you are looking for
-
HP C7250 AIO will not print wirelessly or connected
I have tried to download HP's latest drivers as well as their older drivers to get my printer working with my ibook. I have had no luck, all print jobs go straight into the completed tab and do not print anything. I downloaded an HP printer utility (
-
Some thoughts on new features and workarounds
Hey Gang, I am a recent FCP7 convert, actually used to use PPro up unitl 2005. A couple things have really bugged me and I think that these requests may be helpful to some of you or perhaps you know an easy workaround. One thing that is annoying is t
-
I created new webpart page and added one list view web part into the page. However I can see the ITEMS and LIST tabs on ribbon area, but all the buttons are deactivated. Do I have to activate any feature for this or any settings are needed for the we
-
Load Balancing - Forms Metrics Server
Hi everyone, i have a doubt, for implemeting Load Balancing with Forms Metrics Server previous i must have configured Shared APPL TOP? And for Load Balancing JServ also i must have configured Shared APPL TOP in all my applications servers? Thank you
-
What is the best practice for BADI?
Hi all, this is my first post. I've seen many BADI examples here at SDN and elsewhere where after defining the badi at SE18, and the implementation at SE19, you just create a Z program and call the badi and its method. No brainer. I know how to use t