What are the current versions of Labview and Teststand

Hello,
i am currently downlading the current versions of teststand and labview for evaluation.
In the Teststand-link i saw that it is called "Teststand 2012".
1. But there was no version-information in the Labview-Download. Is this also version 2012?
2. Are both things 32-bit-software?
3. After i installed the evaluation-downloads - can they be activated with a key or do i have to install it again when the CDs arrive in my office?
Thanks for help
Solved!
Go to Solution.

OnlyOne wrote:
Thx for the links.
I am using Windows-7-64bit - should i prefer then also Labview 64? (The NI-download-Links only provides 32bit for download)
Will there be any problems converting my existing Labview 8.5-Vis to the new Labview2012?
Thank you
You can have both the 32-bit and 64-bit installed. Just remember your target when you build an exe. 64-bit compiled programs can only run on 64-bit machines.
You should have no problem upgrading your code from 8.5.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

What are the latest versions of RAID Admin and RAID Firmware

As of 10/18/06, what are the latest versions of RAID Admin and RAID Firmware?
Currently I have RAID Admin 1.5.
RAID Admin reports my RAID's firmware is version 1.3.2/1.26a.
Am I safe?
Do I have the latest?
Thanks.
XServe G5

You do not have the latest firmware. The latest firmware is version 1.5.
You should upgrade. Make sure you have a current backup and then select "update firmware" from within RAID admin. It will then ask you for the location of the firmware update -- it should be in /Application/Utilities/Xserve RAID Update.

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

2009 Mac Pro upgrading graphics card to GTX 680 mac. What is the best version of AE and PP and OSX to have?

Hello,
I have a 2009 Mac Pro 4.1
Mac OSX version 10.6.8
Processor - 2 x 2.26 GHz Quad-Core Intel Xeon
Memory - 24GB
Graphics Card - ATI Radeon HD 4870
I use After Effects and Premiere Pro daily for my work. I am not too technically minded. I want to update and improve my machine as much as possible and am thinking of buying an SSD drive to replace my current start up disk. I also am thinking about getting the GTX 680 mac version graphics card. I have read many online discussions regarding OpenCL and CUDA, many discussions with mixed feelings about the improvements the 680 gives an older Mac Pro - some people say it is amazing others say the improvements seem minimal or worse.
What I want to know is if I purchase the SSD and 680 graphics card what is the optimal OSX - 10.8 or 10.9? and what is the optimal versions of AE and PP to have - CS6 or CC? Also what settings and what additional drivers would I need to consider?
I contacted an independent authorised mac reseller and he thought it was a bad idea to put a new graphics card and get the latest OSX in an old machine and tried to sell me a used 2010 Mac Pro, but I think it would be more cost effective to get the SSD and 680 instead, it's just I read the occasional horror story on a forum and I worry about making the wrong choice, I rely on my Mac Pro to make a living!
Thanks in advance

Thank you for the valuable information Eric, I think I will go with the 680 but I understand that it wont be fully utilised on my old Mac Pro.
Perhaps I will replace my startup/applications hard drive with a 480GB SSD. My other 3 bays are full with 3 x 2TB Hard drives that have media on them so I have no spare room for a dedicated SSD drive for AE cache. But could I put a 250GB SSD into one of the PCI-E slots using something like - SSD SuperSpeed Upgrade Kit for Apple Mac Pro 2008 2009 2010 2012 | eBay
Would this be my best solution? Is it a relatively simple installation, does anyone have any experience of a similar setup?
cc_merchant, thank you for the reply, I am aware you have to pay monthly payments for CC, that is no problem.

What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi

What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi ?
I am modifying an existing workspace for a new product, and it seems like more work to add the vi's into a LabVIEW project
does it gain anything in the long run

Hi Rusty,
I wanted to quickly clarify on the integration between TestStand and LabVIEW Projects.
As Jeff mentioned, some of the big benefits of using LabVIEW Projects is to organize code and to namespace them.
For instance if you had a project called "Power Supply" that housed all your power supply code and had a VI in that called "Initialize", and another project called "Temperature Chamber" that also had a VI called "Initialize", both these VIs are namespaced by the project, so there is no longer confusion about which "Initialize" VI is being used.
Now from a TestStand point of view, in prior version of TestStand, we lost some of this benefit because TestStand did not know about TestStand projects and called VIs simply as un-namespaced VIs. However, in TestStand 2010 (released last year, free eval available at ni.com/teststand), we added the ability to (optionally) call VIs within the context of their projects. This means that:
VIs are now namespaced by their project, even when called from TestStand
VIs can use project specific constructs like NI-DAQmx tasks and conditional compilation settings
Note: When creating deployments, the VIs maintain their projects and namespacing, so this benefit holds true for deployments as well.
Additionally, someone had mentioned looking into using lvlibs to namespace your VIs for deployment. Two comments:
With TestStand 2010, this is no longer neccessary since the project itself namespaces the VIs
You might also want to look into LabVIEW Packed Project Libraries, which combined several VIs into a single file. Think of it as a DLL specific to LabVIEW that is as easy to call as normal LabVIEW VIs. TestStand 2010 can call VIs that are exposed by PPLs. In addition, the deployment utility can automatically pack your VIs into PPLs for deployment.
Hope this is helpful!
Jervin Justin
NI TestStand Product Manager

What is the current version of Garage Band?

What is the current version number of Garage Band?

What is the current version number of Garage Band?
Why are you asking? Are you planning to upgrade?
The current version 10.0.1 is is a very different application from the previous GarageBand '11, version 6.0.5.
The new GarageBand 10.0.1 is a bit of a mongrel - half Logic and half GarageBand. It brought new terrific features, like the Arpeggiators and smart Drummers, but other great features of GarageBand '11 have been dropped., no more podcast tracks, and you cannot any longer combine the effects freely.
If you decide to ugrade to GarageBand 10.0.1, make sure, not to delete the previous version. You may want to use both versions in parallel.They are compatible.

What is the last version of labview to support classic FieldPoint?

what's the last version of labview to support classic FieldPoint?
Solved!
Go to Solution.

In general, yes. Others with more experience than I do might be able to help.
I think there is a chance you can get some older versions of LabVIEW to work on Win7. There are occasional message threads where people have asked about a particular version and others said they have been able to get them to work. Just that official support for older versions of LabVIEW for a Win7 OS has ended.

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications?

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?

centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module. However, that does not mean you can't use your FieldPoint bank without the Real Time module.
From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions.
This program runs on the PC not the FieldPoint controller. If you loose network connection to the fieldpoint, your program will loose connection to the IO. For many data logging applications this type of arrangement can work just fine. However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only.
If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
Message Edited by StevenA on 07-22-2008 04:14 PM
SteveA
CLD
FPGA/RT/PDA/TP/DSC
Attachments:
fp pallet.PNG ‏6 KB

What are the differences between Captivate 6 and 7?

What are the differences between Captivate 6 and & 7?

Check the Captivate blog. BTW there were 3 versions of 6 (each with different features), and already 2 versions of 7.
http://blogs.adobe.com/captivate/2013/12/the-most-awaited-enhancements-in-advanced-actions -and-variables-are-here.html explains the new features in 7.0.1.
You can also find articles on the features of 7.

What are the differences between 4.6B and ECC

What are the differences between 4.6B and ECC ?.
Thanks

Refer a similar post /message/1783778#1783778 [original link is broken] and my reply there in
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
Here are the Links
for SAP ERP Central Component 6.0
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
for 4.7 SAP R/3 Enterprise
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
and for Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
You can pick up the similar Release Notes for any version you are interested in

What are the differences between SunFire 880 and v880?

What are the differences between SunFire 880 and SunFire V880?
Did a search for "SunFire 880" and found links to the V880 but nothing for the one without the V:
http://www.sun.com/servers/midrange/v880/

There are four machines in the server room, two rather old and not in service right now, the other two are relatively new and are now in service.
The print on one new and one old machine is "*SunFire 880*" and
the print on the other two (one new and one old) is "*SunFire V880*".
No, it's not that the paint is chipped or any such thing and there is no space for a "*V*" in the print.
btw, of the two that are in service, both have the same OBP version, if it matters.
Hence it appears that Sun indeed sold machines with V and without V.
So, what are the differences?
Edited by: ad101 on Aug 25, 2009 5:14 PM

What are the differences between iphoto ios5 and iphoto ios6?

what are the differences between iphoto ios5 and iphoto ios6?

There is no difference unless you update iPhoto.
The iPhoto.app was updated and now version 1.1 is available. This version includes the ability to create Shared Photo Streams if you have iOS 6.
-Doug

What is the current version of SAP in Market ?

Dear,
What is the current version of SAP in Market ?
Thanx & Regards,
Mohammad Nabi,
[email protected]

hi,
currently ECC 6.0 is available and solution manager 4.0 is being used.
However please let us know the context of the question so that we can throw light may be.
regards
sadhu kishore

What are the Latests versions of Robohelp?

Hellow,
I am planning to purchase a help authoring system like
Robohelp, but I need to know if Adobe Robohelp 6 is the latest
version or not.
if not what are the latests versions? and how can I get their
trials ?.
thanks.

One ot the output options from RoboHelp is WebHelp Pro. Click
the link below to see RoboWizard's topic on the difference between
WebHelp and WebHelp Pro. It contains a link to John Daigle's topic
on WebHelp Pro.
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/082005.htm
Where you read RoboEngine in those topics, that is the name
of the previous version of RoboHelp Server 6.
Don't think WebHelp Pro is a must have. Many people produce
perfectly good professional help using plain WebHelp. You have to
decide if you do need the extra features. The Pro output no longer
contains the natural language search that you will see referred to
in those topics.

What are the current versions of Labview and Teststand

Similar Messages

Maybe you are looking for