What are the data collection requirements for CAND?

Please explain the exact data collection requirements for CAND (Connected Analytics for Network Deployment). Thanks

CAND needs to collect the following show command outputs for analysis: show version, show running-config, show module (or show diag, depending on the platform).

Similar Messages

  • What are the minimum system requirements for GB 4?

    What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
    I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
    I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

    I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
    (I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
    Click Here
    Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

  • What are the real minimum requirements for Mountain Lion?

    What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

    From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

  • What are the video card requirements for running a 23" cinema display

    What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
    Intel P4 3.0ghz   Windows XP  

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • What are the operating system requirements for installing a trial version of lightroom 4?

    what are the operating system requirements for installing a trial version of lightroom 4?

    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
    Mylenium

  • What are the ideal system requirements for Adobe Captivate?*

    What are the ideal system requirements for Adobe Captivate?* In order to ensure it runs at a good speed.

    I don't know about ideal, but I'm using an Intel Core2 Duo, 3.16ghz, 3.46gb ram, winXP Pro SP3.  This is an HP branded PC, it uses the onboard Q45 video.
    I rarely have any problems that I haven't caused myself (having too many applications open while I work).
    hope that helps.

  • What are the backend configuration required for photo upload from portal?

    Hi all,
    When i am trying to upload the photo from portal  it is giving error
    can not archive the photo
    we are using portal 7 and  ecc 6.0
    I want to know
    What are the backend configuration required for photo upload from portal
    Can any but help me out
    Rajendra

    Hi,
    Are you using the standard iview. If that's the case you need to configure in the backend. Meaning you need to store the photo in the Org management(HR) which the HR functional guys will do. You just need to add the iview to your role.
    Let me know if you require further informationn.
    Award points if helpful.
    Cheers,
    sathya

  • What are the Client machine requirements for running Forms 6i?

    What are the minimum/ideal hardware requirements of the client machines which run forms 6i in separate frames.
    The reason for asking this is that the users have multiple sessions of separate Forms frames. When they do a lot of activity/transactions, and try to do a windows Print Screen on a MSWord file, nothing seems to print on the Word document. If they save the document and reboot the computer and open the same word document again then the screen print shows up. I am thinking it is because the separate frames take up lot of RAM. Typical configurations of our m/c are PII 400's with 64MB RAM.
    Thanks in advance.

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • HT4437 what are the minimum wireless requirements for airplay regards wireless strength ( DBs)

    What are the minimum requierments for Apple Airplay? i need to know how strong in BDs the system con operate down to?

    It is not a matter of single strength.  That only tells you the amplitude of the radio connections which tells you nothing.  What really matters is the speed of traffic across the connection and the number of dropped/lost packets.  And single strength tells you neither of these.  Interfearance, noise, collisions due to too many WiFi connections in the area impact the connection.  You can have strong single strength and not be able to maintain a connection.

  • What are the skill sets required for a PCR consultant?

    what are the WebDynpro  skill sets required from the PCR consultant.

    Hi
    Follow the previous reply further take some input from these threads
    1.[PCR and Netweaver Developer Studio |PCR and Netweaver Developer Studio;
    2.[PCR in Portal 6  |/message/126419#126419 [original link is broken];
    Best Regards
    Satish Kumar

  • What are the disk space requirements for CC2014?

    Yes, Adobe has the system requirements for each INDIVIDUAL app in CC2014 listed, but they're all listed separately. Since I'll be installing the entire suite on my new machine, I'd like to know the disk space requirements for the ENTIRE suite.
    Thanks

    There's a summary in the table at the bottom of the page here:
    Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools

  • What are the thread safety requirements for container implementation?

    I rarely see in the TopLink documentation reference to thread safety requirements and it’s not different for container implementation.
    The default TopLink implementation for:
    - List is Vector
    - Set is HashSet
    - Collection is Vector
    - Map is HashMap
    Half of them are thread safe implementations List/Collection and the other half is not thread safe Set/Map.
    So if I choose my own implementation do I need a thread safe implementation for?
    - List ?
    - Set ?
    - Collection ?
    - Map ?
    Our application is always reading and writing via UOW. So if TopLink synchronize update on client session objects we should be safe with not thread safe implementation for any type; does TopLink synchronize update on client session objects?
    The only thing we are certain is that it is not thread safe to read client session object or read read-only UOW object if they are ever expired or ever refreshed.
    We got stack dump below in an application always reading and writing objects from UOW, so we believe that TopLink doesn’t synchronize correctly when it’s updating the client session objects.
    java.util.ConcurrentModificationException
    at java.util.AbstractList$Itr.checkForComodification(AbstractList.java:449)
    at java.util.AbstractList$Itr.next(AbstractList.java:420)
    at oracle.toplink.internal.queryframework.InterfaceContainerPolicy.next(InterfaceContainerPolicy.java:149)
    at oracle.toplink.internal.queryframework.ContainerPolicy.next(ContainerPolicy.java:460)
    at oracle.toplink.internal.helper.WriteLockManager.traverseRelatedLocks(WriteLockManager.java:140)
    at oracle.toplink.internal.helper.WriteLockManager.acquireLockAndRelatedLocks(WriteLockManager.java:116)
    at oracle.toplink.internal.helper.WriteLockManager.checkAndLockObject(WriteLockManager.java:349)
    at oracle.toplink.internal.helper.WriteLockManager.traverseRelatedLocks(WriteLockManager.java:144)
    at oracle.toplink.internal.helper.WriteLockManager.acquireLockAndRelatedLocks(WriteLockManager.java:116)
    at oracle.toplink.internal.helper.WriteLockManager.checkAndLockObject(WriteLockManager.java:349)
    at oracle.toplink.internal.helper.WriteLockManager.traverseRelatedLocks(WriteLockManager.java:144)
    at oracle.toplink.internal.helper.WriteLockManager.acquireLockAndRelatedLocks(WriteLockManager.java:116)
    at oracle.toplink.internal.helper.WriteLockManager.acquireLocksForClone(WriteLockManager.java:56)
    at oracle.toplink.publicinterface.UnitOfWork.cloneAndRegisterObject(UnitOfWork.java:756)
    at oracle.toplink.publicinterface.UnitOfWork.cloneAndRegisterObject(UnitOfWork.java:714)
    at oracle.toplink.internal.sessions.UnitOfWorkIdentityMapAccessor.getAndCloneCacheKeyFromParent(UnitOfWorkIdentityMapAccessor.java:153)
    at oracle.toplink.internal.sessions.UnitOfWorkIdentityMapAccessor.getFromIdentityMap(UnitOfWorkIdentityMapAccessor.java:99)
    at oracle.toplink.internal.sessions.IdentityMapAccessor.getFromIdentityMap(IdentityMapAccessor.java:265)
    at oracle.toplink.publicinterface.UnitOfWork.registerExistingObject(UnitOfWork.java:3543)
    at oracle.toplink.publicinterface.UnitOfWork.registerExistingObject(UnitOfWork.java:3503)
    at oracle.toplink.queryframework.ObjectLevelReadQuery.registerIndividualResult(ObjectLevelReadQuery.java:1812)
    at oracle.toplink.internal.descriptors.ObjectBuilder.buildWorkingCopyCloneNormally(ObjectBuilder.java:455)
    at oracle.toplink.internal.descriptors.ObjectBuilder.buildObjectInUnitOfWork(ObjectBuilder.java:419)
    at oracle.toplink.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:379)
    at oracle.toplink.queryframework.ObjectLevelReadQuery.buildObject(ObjectLevelReadQuery.java:455)
    at oracle.toplink.queryframework.ObjectLevelReadQuery.conformIndividualResult(ObjectLevelReadQuery.java:622)
    at oracle.toplink.queryframework.ReadObjectQuery.conformResult(ReadObjectQuery.java:339)
    at oracle.toplink.queryframework.ReadObjectQuery.registerResultInUnitOfWork(ReadObjectQuery.java:604)
    at oracle.toplink.queryframework.ReadObjectQuery.executeObjectLevelReadQuery(ReadObjectQuery.java:421)
    at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:811)
    at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:620)
    at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:779)
    at oracle.toplink.queryframework.ReadObjectQuery.execute(ReadObjectQuery.java:388)
    at oracle.toplink.queryframework.ObjectLevelReadQuery.executeInUnitOfWork(ObjectLevelReadQuery.java:836)
    at oracle.toplink.publicinterface.UnitOfWork.internalExecuteQuery(UnitOfWork.java:2604)
    at oracle.toplink.publicinterface.Session.executeQuery(Session.java:993)
    at oracle.toplink.publicinterface.Session.executeQuery(Session.java:950)

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • What are the host network requirements for a 2012 R2 failover cluster using fiber channel?

    I've seen comments on here regarding how the heartbeat signal isn't really required anymore - is that true?  We started using Hyper-V in its infancy and have upgraded gleefully every step of the way.  With 2012 R2, we also upgraded from 1gb iSCSI
    to 8GB Fiber Channel.  Currently, I have three NICs in use on each host.  One for "No cluster communication" on it's own VLAN.  Another for "Allow cluster network communication on this network" but NOT allowing clients, on
    a different VLAN.  And lastly the public network which allows cluster comms and clients on it (public VLAN).
    Is it still necessary to have all three of these NICs in use?  If the heartbeat isn't necessary any more, is there any reason to not have two public IPs and do away with the rest of the network?  (two for fault tolerance)  Does Live Migration
    still use Ethernet if FC is available?  I wasn't sure what all has changed with these requirements since Hyper-V first came out.
    If it matters, we have 5 servers w/160GB RAM, 8 NICs, dual HBAs connected to redundant FC switches, going to two SANs.  We're running around 30 VMs right now.  
    Can someone share their knowledge with me regarding the proper setup for my environment?  Many Thanks!

    Hi,
    You can setup cluster with a single network but that leaves you with single point of failure on the Networking front, it is still recommended to have a heartbeat network.
    Live migration would still happen though Ethernet, it has nothing to do with FC. Don't get confused, you had iSCSI for storage which used one of your VLAN and now you have FC for your storage.
    Your hardware specs looks good. You can set up the following networks -
    1. Public Network - Team two or more NICs (based on bandwidth aggregation)
    2. Heartbeat Network - Don't use teamed Adaptor
    3. Live Migration - Team two or more NICs (based on bandwidth aggregation)
    Plan properly and draw guidelines to visualize and to remove single point of failure at all points.
    Feel free to ask if you have some more queries.
    Regards
    Prabhash

  • What are the kernel option required for udev in 2.6.28 kernel

    Hi All,
    I just want to know the exact options that we need to enable in the
    kernel configuration for the latest udev. Some options specified in
    http://webpages.charter.net/decibelshel … rimer.html is
    not available ( or changed position ) in the 2.6.28 kernel.
    I know that copying the existing config file from linux distro will do
    it. But want to know about the exact kenel modules/support needed for
    udev to get everything working. Please help.

    B wrote:
    OK I was definitely not qualified to answer that question .
    May I ask what you are trying to do exactly?
    If you are rebuilding your own kernel you might as well check the documentation in the kernel building utilities (gconfig, qconfig, xconfig, ...). Granted, it takes longer, but you get to know your way around. Also, I don't think those options are specific to 2.6.28 either - it would surprise me if they get altered so frequently you'd need to inquire about a specific kernel version.
    I am using the kernel 2.6.28. Thats why I specified the kernel version as 2.6.28. Yes, those options are generic to latest version of 2.6 kernel. But things were changed from 2.6.13 kernel and again as per the comment from kay sievers, it again going to change in next version.
    Yeah, SIGNALFD only in the next, the to be released version
    http://www.spinics.net/lists/hotplug/msg02162.html
    I am just searching to find out the kernel configuration options to get the udev working. The udev primer is for 2.6.13 and I know there are lots of changes in newer version of kernel/udev. I know how to build kernel and I like menuconfig than the GUI utilities.
    Thanks for all the answers/comments.

  • What are the Jar files required for Tomcat server of jdev 11.1.2.0.0

    Hello Experts,
    My client wants to just check the adf application on tomcat server
    how do I create a war file and then deploy it into Tomcat server
    and what all JAR files do I require to do it??
    I am using jdev 11.1.2.0.0 and tomcat server is 6.0.35
    Thanks for the help..
    933601.

    https://blogs.oracle.com/dana/entry/how_to_deploy_a_11g_adf_applic_1
    http://docs.oracle.com/cd/B31017_01/web.1013/b28967/deployment_topics012.htm
    Tomcat Extension for JDeveloper is available.
    http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/130355.xml#shay.tomcat

Maybe you are looking for

  • HT204655 How does photos deal with duplicate photos

    I Have multiple iPhoto libraries and an Aperture library. How are duplicates photos handled when I upgrade to Photos?

  • JDeveloper 10.1.2.1 won't compile my code?

    Hi, I'm pretty new to JDeveloper, and Java in general. I've just downloaded and tried to run JDeveloper 10g (10.1.2.1.0, Build 1913) and I've having problems. When the application loads, I get a dialog message titled "Java Virtual Machine Launcher",

  • Image Field Read Only

    Is there any way I can make an image field on a form "read only" after an image has been inserted? Probably to be changed via some password security setting etc? Thanks

  • ALV (hide column)

    Hi, Is there any method in ALV grid to hide a column with quantity and display only the subtotals along with the line items displayed. for example. customer a a(subtotal-22) b b b(subtotal-26) The quantity column is hidden. please send your suggestio

  • Proper CSS syntax for...

    Awhile back, Murray gave me this simple thumbnail border hover code : img.tn { border:1px solid #72472B; a:hover img.tn { border:1px solid #FFF; Trying to extend the lesson learned to other parts of the site, I created this : img#modal { border:1px s