What are the default skin selectors applied for af:commandButton,

Hi Experts,
Please let me know where i can get the default skin applying for ADF Faces Core Components like af:commandButton, af:selectOneChoice, af:outputText etc..
Please let me know where i can get detailed skin selectors for ADF Faces Core Components in 10g, As per this link, [http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/skin-selectors.html#Component-level Selectors] only some of the components has selectors, but for others there are no specific selectors..
Regards,
R N V Prasad.

Hi Folks
Can anyone reply or suggest some ideas on how to get or modify the skins of core components like af:commandButton, af:outputText, af:selectOneChoice etc...
regards,
R N V Prasad.

Similar Messages

  • What are the default parameters for PER_EVENTS api

    Dear Experts,
    Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
    procedure create_event
    (p_validate in BOOLEAN default FALSE
    ,p_date_start in DATE
    ,p_type in VARCHAR2
    ,p_business_group_id in NUMBER default NULL -- HR/TCA merge
    ,p_location_id in NUMBER default NULL
    ,p_internal_contact_person_id in NUMBER default NULL
    ,p_organization_run_by_id in NUMBER default NULL
    ,p_assignment_id in NUMBER default NULL
    ,p_contact_telephone_number in VARCHAR2 default NULL
    ,p_date_end in DATE default NULL
    ,p_emp_or_apl in VARCHAR2 default NULL
    ,p_event_or_interview in VARCHAR2 default NULL
    ,p_external_contact in VARCHAR2 default NULL
    ,p_time_end in VARCHAR2 default NULL
    ,p_time_start in VARCHAR2 default NULL
    ,p_attribute_category in VARCHAR2 default NULL
    ,p_attribute1 in VARCHAR2 default NULL
    ,p_attribute2 in VARCHAR2 default NULL
    ,p_attribute3 in VARCHAR2 default NULL
    ,p_attribute4 in VARCHAR2 default NULL
    ,p_attribute5 in VARCHAR2 default NULL
    ,p_attribute6 in VARCHAR2 default NULL
    ,p_attribute7 in VARCHAR2 default NULL
    ,p_attribute8 in VARCHAR2 default NULL
    ,p_attribute9 in VARCHAR2 default NULL
    ,p_attribute10 in VARCHAR2 default NULL
    ,p_attribute11 in VARCHAR2 default NULL
    ,p_attribute12 in VARCHAR2 default NULL
    ,p_attribute13 in VARCHAR2 default NULL
    ,p_attribute14 in VARCHAR2 default NULL
    ,p_attribute15 in VARCHAR2 default NULL
    ,p_attribute16 in VARCHAR2 default NULL
    ,p_attribute17 in VARCHAR2 default NULL
    ,p_attribute18 in VARCHAR2 default NULL
    ,p_attribute19 in VARCHAR2 default NULL
    ,p_attribute20 in VARCHAR2 default NULL
    ,p_party_id in NUMBER default NULL -- HR/TCA merge
    ,p_event_id out nocopy NUMBER
    ,p_object_version_number out nocopy NUMBER
    );

    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts.

  • What are the default settings for ethernet, shows connected but no internet

    What are the default settings for ethernet ? shows connected but no internet via ethernet.
    It used to work fine but I think i have changed something getting my airport to work.
    Now i only get internet via wifi.
    Thanks in advance

    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts.

  • What are the default userid and password to logon to Oracle Applications

    What are the default userids and passwords to logon to Oracle Applications Manager?

    There r no any default password for Application Manager,
    However userID is applmgr and if I have to create a password for applmgr I would do that as welcome or welcome1 so the applmgr user can change it when he/she log on first time as needed.

  • What is the default iTune Folder Structure for iTunes 10?

    What is the default iTune Folder Structure for iTunes 10? As far as I can tell in windows 7 it goes something like.
    My Music\iTunes\iTunes Media\Music
    Other folders for downloads, pod casts, mobile applications are all in the iTunes Media folder, however the iTunes library database files are located in the iTunes Folder.
    The reason I ask is that I am re-doing my music collection and I set up the folder structure mentioned above, but iTunes re-arranded everything and copied all of my music into the iTunes Media folder.
    Anyone have any idea how iTunes does it by default?

    Here are typical layouts for the iTunes folders:
    If you have upgraded from version 8 (or earlier) to iTunes 9 (or later) at some point, then your media folder (everything inside the red outline) may still be called iTunes Music instead of iTunes Media. The extra Music folder inside the media folder is used if you have allowed iTunes to Upgrade to iTunes Media Organization (iTunes 9) or used File > Library > Organize Library > Reorganize files in the folder "<Media Folder>" (iTunes 10). Depending on your choices for Keep iTunes Media folder organized and Copy files to iTunes Media folder when adding to library plus a little bug in which one build changed the name of the file storing the choice of layout it is quite easy for some of your files to be organized according to one layout and some the other.
    Assuming you're happy letting iTunes organize your files the following steps should tidy things up (should it be necessary):
    1. Select File > Library > Organize Library... > Tick Reorganize files in the folder "<Media Folder>" and click OK. Skip if this option is greyed out (already upgraded) or you prefer the older layout.
    2. Select File > Library > Organize Library... > Tick Consolidate files and click OK. This will bring any files currently organised outside the designated media folder into it.   NB This will create duplicate copies of any file that needs to be consolidated, and you will need to manually clean up afterwards. If space is at a premium try my scripts Unconsolidated to find out what would need moving and ConsolidatebyMoving to move rather than copy it.
    3. Select Edit > Preferences > Advanced tab, uncheck Keep iTunes Media folder organized and click OK.
    4. Select Edit > Preferences > Advanced tab, check Keep iTunes Media folder organized and click OK. This triggers iTunes into reorganizing everything according to your preferences.
    5. (Optional) Close iTunes, rename the folder iTunes Music as iTunes Media then restart iTunes. Check under Edit > Preferences > Advanced tab that the location has automatically updated. If you can't access the media for any reason just undo the folder rename.
    6. (Optional - Windows only) If Windows Media Player has ever had access to your files it may have liberally scattered folder artwork files about which iTunes won't tidy up when it reorganizes things, thus leaving behind a heap of folders with artwork and no media. I've written a script for cleaning this mess up called CleanDeadArt.
    PS If you really prefer the older layout, but it is already in the new one then edit the file called .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 before doing step 3.
    tt2

  • What are the Corresponding fields in CRM for sales order in ECC

    HI! Experts,
    While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
    VBKD-BSARK - Purchase order type
    VBAK-BNAME - Name: user ordered
    VBKD-IHREZ - Web Confirmation Number
    VBAK-TELF1 - Telephone number
    Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
    Thanks and Regards
    Mayank

    Mayank,
    May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
    Check the following fields in CRM and see if you find the data you require.
    VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
    VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
    VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
    VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship  "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
    Hint: Once you have the R/3 order in CRM, try using the Report program (SE38)  CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
    Easwar Ram
    http://www.parxlns.com

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all,
    What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    Help will be surely rewarded.
    Thanks and Regards,
    Creasy

    > What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
    > Help will be surely rewarded.
    &********************** Please read "the rules" if found usefull... ************************&
    Cheers,
    Julius

  • What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

    I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

    I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
    The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
    Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
    Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
    Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
    When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
    Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi,
    I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
    I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
    Dr. Kirco Arsov
    Solved!
    Go to Solution.

    Hi Kirco,
    I have some more information for you :-)
    I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
    As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
    From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
    TB_0_LevelEdgeReg :: Offset 0x660
    TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
    7..6: EdgeMode
    5..0: LESel
    LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
    EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
    TG_0_CombinationReg :: Offset 0x6A0
    TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
    19..16: CombFunction
    5..4: CombTypeB
    1..0: CombTypeA
    CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
    CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
    CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
    All of the other bits should be set to 0b0.
    Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

  • What are the best books to purchase for pl/sql programming?

    What are the best books to purchase for pl/sql programming?
    I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
    Thanks

    In my opinion one of the best to start
    Oracle PL/SQL Programming, Third Edition
    Steven Feuerstein

  • What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?

    What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?
    I read an article and cannot find it that said something about trying to make it 2million pixels and JPG to keep it small, but what exactly should the dimensions be that I ultimately import?  Is there some kind of a "density" setting I have to use, as well, when exporting from Photoshop, for example?

    See Optimizing performance in your iBooks Author books
    Density is discussed by Apple in this context as 'dpi'...
    132 - iPad 2
    264 - new iPad
    At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
    Good luck.
    Ken

  • Hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    Only the carrier to whom the device is locked can authorize it's unlocking.  Contact the carrier to see if they offer unlocking and if you qualify.

  • What are the third party tools available for Encryption in Oracle database?

    Dear All,
    Can you please help me with the below question?
    What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

    Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
    http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
    But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
    1. Operating system
    2. Database edition and version
    3. What type of data needs to be secured
    4. What level of security is required

  • What are the allowable dimensions of screenshots for ibooks?

    What are the allowable dimensions of screenshots for ibookes?  I know the requirement is very specific.
    And what is the best tool to do so?  I tried to use the native screenshot tool but it is hard to make the size precise.

    Minimum size is 600 pixels in the shorter dimension. Maximum size is 2048 pixels in the longer dimension. That's what you get when you take a screenshot on a new iPad. (There is no point in having something larger than this.) Screenshots taken with an older iPad are 1024x768.
    For my book, I just took screenshots on an iPad 2 (1024x768) and used those. They were accepted without complaint.
    Michi.

  • What are the defaul username and password for SQL Plus ?

    hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1

    You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
    I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
    When you install it, you'll be given several options about the type of database you want.
    But before you install anything, you should read the installation manual for your platform.

Maybe you are looking for