What are the dememsions on this?

thanks

if you mean the 2nd gen ipod nano. and not the new phatty nano then the measurements is 3.5 inches by 1.5 inches. and 5 mm thick. Also this nano is an older model and not the newer one announced today.
GFF

Similar Messages

What are the chances of this thing actually working?

Hey there, over the next few sentences you'll probably be thinking I'm a hobo or something but whatever. I found an iPhone on the footpath today and it was kinda wet from inside. When I got it home and took it apart to see how much water was inside, there wasn't that much, a bit damp though. My dad dried it off with a blow dryer (Yeah I know, he isn't great with electronics) and cracked the screen right between the middle trying to open it up. I chargered it a little and I could faintly see the Apple logo. The screen went black shortly after and I couldn't do anything. Sometimes I can see something that looks like a USB plug but it was hard to tell. Any of the computers with iTunes in my house don't recognize the phone. The screen might turn into the Matrix's code (you know, all the green numbers lined up?) if you looked at it from real far and had sunglasses on.
I think it's an Iphone 3G, so what are the chances of this thing actually working? Is it completely busted, would it be worth taking it to get repaired, selling it for spare parts or just throwing the thing away?

It doesn't belong to you. Turn it in to the police.

What are the Technologies behind this mobile application ?

What are the technologies involved in developing this mobile application?
https://store.sap.com/sap/cpa/ui/resources/store/html/SolutionDetails.html?pid=0000004878&catID=MOB&pcntry=US&sap-langua…
Is this Native/ Hybrid?
based on MBO/Odata
The graph is based on MAKIT / BI Mobile ?
Looking at technical requirements it can be understood that the application is based on SUP , but how
any other technologies involved which should be consider to develop a similar application?
Note: The intention to know this is the curiosity to analyse mobile technologies only .

Its difficult to guess the technologies have been used in developing this kind of apps.
I guess this could be MBO based native app with MaKit. But at the same time i will suggest you to contact solution providers.
Rgrds,
Jitendra

What are the differences between this two statements???

1.select * from counter where eboxid = (select acctid from zsyy_ocecs.cm_subs_subscriber where servnumber = ?);
2.select b.* from zsyy_ocecs.CM_SUBS_SUBSCRIBER a,COUNTER b where a.acctid = b.eboxid and a.servnumber = ?;
what are the differences between the 2 sql statements？？
I WILL APPRECIATE FOR YOUR ANSWERS VERY MUCH, BECAUSE I WAS PUZZLED WHEN I SAW THE EXECUTION PLANS.THANKS AGAIN. MR SHI.
the followings are their execute plans:
Command> select * from counter where eboxid = (select acctid from zsyy_ocecs.cm_subs_subscriber where servnumber = ?);
Query Optimizer Plan:
STEP: 1
LEVEL: 2
OPERATION: TblLkTtreeScan
TBLNAME: ZSYY_OCECS.CM_SUBS_SUBSCRIBER
IXNAME: IDX_SERVNUM
INDEXED CONDITION: CM_SUBS_SUBSCRIBER.SERVNUMBER = qmark_1
NOT INDEXED: ROWNUM < 3
STEP: 2
LEVEL: 2
OPERATION: RowLkTtreeScan
TBLNAME: COUNTER
IXNAME: IDX_COUNTER
INDEXED CONDITION:
COUNTER.EBOXID = CM_SUBS_SUBSCRIBER.ACCTID
NOT INDEXED: <NULL>
STEP: 3
LEVEL: 1
OPERATION: NestedLoop
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
Command> select b.* from zsyy_ocecs.CM_SUBS_SUBSCRIBER a,COUNTER b where a.acctid = b.eboxid and a.servnumber = ?;
Query Optimizer Plan:
STEP: 1
LEVEL: 2
OPERATION: TmpTtreeScan
TBLNAME: ZSYY_OCECS.CM_SUBS_SUBSCRIBER
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: A.SERVNUMBER = qmark_1
STEP: 2
LEVEL: 2
OPERATION: TblLkTtreeScan
TBLNAME: COUNTER
IXNAME: IDX_COUNTER
INDEXED CONDITION: B.EBOXID
= A.ACCTIDNOT INDEXED: <NULL>
STEP: 3
LEVEL: 1
OPERATION: MergeJoin
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: A.ACCTID = B.EBOXID
NOT INDEXED: <NULL>
Edited by: user9533799 on 2008-9-3 上午1:28

If zsyy_ocecs.cm_subs_subscriber table returns one row for each servnumber, both statements would return the same data. But if there was a servnumber value on two rows, the first statement will throw an error (you a comparing a value with a set of values). You can rewrite the first query to avoid this:
select * from counter where eboxid in (select acctid from zsyy_ocecs.cm_subs_subscriber where servnumber = ?);
Conceptually they are different and the execution plan can't be the same.

Best practice implementation. What are the steps for this?.

We had an upgrade from CRM 4 to 7 undertaken by some outfit (name deleted). After the upgrade was complete it would look as though the comapny carried on using the GUI interface rather than the WebUI interface, mainly because that's how CRM 4 worked. Now they would like to use the WebUI interface of CRM 7, as the GUI interface is no longer supported, but are receiving a number of errors when using certain features of teh WebUI. It would look as though a lot of config is missing, especially in the UI Framework area. I can only assume that whichever company performed the upgarde simply skipped this section when upgrading.
I assume that I could download the best practice install/upgrade (?) and then just execute the section regarding the UI Framework, if such a section exists. bearing in mind that there seems to be a lot of config missing in the UI Framework section, would you recommend the course of action that I have mentioned?.
Our WebUI Interaction centre is giving errors when we go in and I have been informed that I need to complete the config for:
Customer Relationship Management->UI Framework->UI Framework Definition->Maintain Runtime Framework Profile
But as I mentioned, there are lots of other sections in the UI Framework area that are empty and hence the suggestion I made above. Hopwever, I would specifically be interested to hear from anyone who can tell me what the entries are in the view table BSPWDV_RF_PROF_C and possibly the table BSPWDV_CTRL_REPL and BSPWDV_DEF_CC.
I know this only completes part of the config, but it might be enough so that the WebUI IC can be viewed.
On another subject, I have just come into this company and if I wanted to see what had been installed how do I go about that. for example, if I wanted to know if there had been an upgrade from 4 to 7 for a particular Industry solution, where do I check this?.
Jason

I have been through the following steps:
Entered this URL http://help.sap.com/bp/initial/index.htm
Clicked on 'Cross-industry Packages'
Clicked on 'CRM'
Clicked on 'Englilsh'
Then the following page is displayed:
http://help.sap.com/bp_crm70/CRM_DE/HTML/index.htm displayed
But now what?. How do I get the Best practice instructions for a CRM implemenation?.
Jason

Custom tables create in Apps schema ( What are the problems with this?)wwww

Hello all,
I'm a dba in a new environment where a number of custom schemas are being created in the apps schema. I know this is not considered Oracle's best practice and I would like to make some recommendations for a change. Before doing so, I would like to know the problems that are associated with custom tables living in the apps schema. We are currently on 11.5.10.2 on AIX. Also, if someone can point me to any "Official" customization standard or Oracle documention where I can backup my case it would be greatly appreciated.
Thanks in advance,

Hi,
Please see this thread.
Custom application implemented in E-bussiness Suite
Re: Custom application implemented in E-bussiness Suite
Regards,
Hussein

What are the elements of this pic?

I am doing a lookbook for a friends clothing brand and this pic I found one the internet really caught my attention. I was wondering how I could make a normal pic look like this? Thanks!

You would start out with a blank, new file, then add objects to it. It requires use of layers, gradients, type tool, etc.
Are you experienced using Photoshop Elements?
Can you photograph objects that you wish to incorporate in to your project?

What are the mistake in this JSP program?

Hi,all. I am a newcomer to learn JSP, and I sincerely hope somebody help me. the following is a JSP program, and I want it extract data from my database and show them on webpage as XML. But there always have some mistakes I cann't found it. Could somebody help me find out them and tell me how to correct. Thanks veeeeeeeeeeeery much!
<%@ page contentType = "text/xml" %>
<%@ page language="java" %>
<%@ page import = "java.sql.* " %>
<%@ page import = "java.io.* " %>
<%@ page import = "javax.xml.parsers.DocumentBuilder" %>
<%@ page import = "javax.xml.parsers.DocumentBuilderFactory" %>
<%@ page import = "org.w3c.dom.Document" %>
<%@ page import = "org.w3c.dom.Element" %>
<%@ page import = "org.w3c.dom.Node" %>
<%@ page import = "org.w3c.dom.NodeList" %>
<%@ page extends = "Object"%>
<html>
<head><title>Searching Page</title></head>
<body>
<p><INPUT size=22 name=T1></p>
<p><INPUT type=submit value=OK name=B3></p>
<% Document retailerDoc = null;
Document dataDoc = null;
Document newDoc = null;
     try {
     DocumentBuilderFactory dbfactory = DocumentBuilderFactory.newInstance();
     DocumentBuilder docbuilder = dbfactory.newDocumentBuilder();
     retailerDoc = docbuilder.parse("RetailerXmlExtract.xml");
               //Instantiate a new Document object
               dataDoc = docbuilder.newDocument();
               //Instantiate the new Document
               newDoc = docbuilder.newDocument();
          }catch(Exception e){}
          //Retrieve the root element
          Element retailerRoot = retailerDoc.getDocumentElement();
          //Retrieve the (only) data element and cast it to Element
          Node dataNode = retailerRoot.getElementsByTagName("data").item(0);
          Element dataElement = (Element)dataNode;
          String driverName = "sun.jdbc.odbc.JdbcOdbcDriver";
          String connectURL = "jdbc:odbc:Retailer";
          Connection db = null;
          try{
               Class.forName(driverName);
               db = DriverManager.getConnection(connectURL);
               catch(ClassNotFoundException e){}
               catch(SQLException e){}
          //Create the PreparedStatement
          PreparedStatement statement = null;
          //Create the Resultset object, which ultimately holds the data retrieved
          ResultSet resultset = null;
          //Create the ResultSetMetaData object, which will holds
          //information about the ResultSet
          ResultSetMetaData resultmetadata = null;
          //Create a new element called "data"
          Element dataRoot = dataDoc.createElement("data");
          try{
               statement = db.prepareStatement("SELECT * FROM Orders");
               //Execute the query to populate the ResultSet
               resultset = statement.executeQuery();
               //Get the ResultSet information
               resultmetadata = resultset.getMetaData();
               //Determine the number of columns in the ResultSet
               int numCols = resultmetadata.getColumnCount();
               //Check for data by moving the cursor to the first record(if there is one)
               while(resultset.next()){
                    //For each row of data, create a new element called "row"
                    Element rowEl = dataDoc.createElement("row");
                    for(int i = 1; i <= numCols; i++){
                         //For each colum index, determine the column name
                         String colName = resultmetadata.getColumnName(i);
                         //Get the column value
                         String colVal = resultset.getString(i);
                         //Determine if the last column accessed was null
                         if(resultset.wasNull()){
                              colVal = "and up";
                         //Create a new element with the same name as the column
                         Element dataEl = dataDoc.createElement(colName);
                         //Add the data to the new element
                         dataEl.appendChild(dataDoc.createTextNode(colVal));
                         //Add the new element to the row
                         rowEl.appendChild(dataEl);
                    //Add the row to the root element
                    dataRoot.appendChild(rowEl);
          catch(SQLException e){}
          finally{
                    try{
                         db.close();
                         }catch(SQLException e){}
          //Add the root element to the document
          dataDoc.appendChild(dataRoot);
          //Retrieve the root element (also called "root")
          Element newRootInfo = (Element)retailerRoot.getElementsByTagName("root").item(0);
          //Retrieve the root and row information
          String newRootName = newRootInfo.getAttribute("name");
          String newRowName = newRootInfo.getAttribute("rowName");
          //Retrive information on element to be built in the new document
          NodeList newNodesRetailer = retailerRoot.getElementsByTagName("element");
          //Create the final root element with the name from the file
          Element newRootElement = newDoc.createElement(newRootName);
          //Retrieve all rows in the old document
          NodeList oldRows = dataRoot.getElementsByTagName("row");
          for(int i=0;i<oldRows.getLength();i++){
               //Retrieve each row in turn
               Element thisRow = (Element)oldRows.item(i);
               //Create the ner row
               Element newRow = newDoc.createElement(newRowName);
                    for(int j=0;j<newNodesRetailer.getLength();j++){
                         //For each mode in the new mapping, retrieve teh information
                         //First the new information........
                         Element thisElement = (Element)newNodesRetailer.item(j);
                         String newElementName = thisElement.getAttribute("name");
                         //Then the old information
                         Element oldElement = (Element)thisElement.getElementsByTagName("content").item(0);
                         String oldField = oldElement.getFirstChild().getNodeValue();
                         //Get the original values based on the mapping information
                         Element oldValueElement = (Element)thisRow.getElementsByTagName(oldField).item(0);
                         String oldValue = oldValueElement.getFirstChild().getNodeValue();
                         //Create the new element
                         Element newElement = newDoc.createElement(newElementName);
                         newElement.appendChild(newDoc.createTextNode(oldValue));
                         //Retrieve list of new elements
                         NodeList newAttributes = thisElement.getElementsByTagName("attribute");
                         for(int k = 0;k<newAttributes.getLength();k++){
                              //For each new attribute, get the order information
                              Element thisAttribute = (Element)newAttributes.item(k);
                              String oldAttributeField = thisAttribute.getFirstChild().getNodeValue();
                              String newAttributeName = thisAttribute.getAttribute("name");
                              //Get the original vale
                              oldValueElement = (Element)thisRow.getElementsByTagName(oldAttributeField).item(0);
                              String oldAttributeValue = oldValueElement.getFirstChild().getNodeValue();
                              //Create the new attribute
                              newElement.setAttribute(newAttributeName, oldAttributeValue);
                         //Add the new element to the new row
                         newRow.appendChild(newElement);
                    //Add the new row to the root
                    newRootElement.appendChild(newRow);
               //Add the new root to the document
               newDoc.appendChild(newRootElement);
          try{
               out.println("<?xml version=\"1.0\" encoding=\"UTF-8\"?>");
               out.ptintln("<!DOCTYPE orders SYSTEM \"RetailerXml.dtd\">");
               out.println(newRootElement.toString());
          } catch(IOException e) {}
%>
</body>
</html>

it reminded that there were some mistakes when i run this JSP program,so it must have something wrong, but due to my weak programming skills, I can not found these mistakes out. That must give me very useful help if you tell me how to solve them. thank you vrey much!

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

What are the ages of the persons in forum?

I'm curious, (and I suppose other people would like to know) about what are the ages in this forum.
Please if anyone don't whan't to say, please don't post rong ages.
I'm 15.

At eighteen he might have been a poet. Now he is not a poet, not a writer, not an artist. He is a computer programmer, a twenty-four-year-old computer programmer in a world where there are no thirty-year-old computer programmers. At thirty one is too old to be a computer programmer: one turns oneself into something else - some kind of businessman - or one shoots oneself.-- J.M.Coetzee, Youth.
Pete (34)

What are the Minimum Number of Dia or BTC Work Process should be Configured

Hi All,
Can any One Let me Know why We need to Have 2 Minimum Dialog Work Process and not 1 or 3.
What are the Task does this 2 Minimum work process handles in CI.
Thanks & Regards
Dan

You need more than on if the system needs e. g. generate a program, this is done asynchronously, one process "waits" while a second generates a program. This is the absolute minimum, if you have only 1, you will stuck at the first time, the system needs to generate.
Markus

RV_INVOICE_CREATE for this FM what are the mandatory fields

Hi guru,
        in my process development, first i am creating the sales order using the BAPI FM SD_SALESDOCUMENT_CREATE, From this FM i get the sales order no, after that i use this fm RV_INVOICE_CREATE , then i pass the VBELN (sales order no), but it is not created the invoice no,
what are the fields i have to pass for this FM.
What is the use of this FM : RV_INVOICE_DOCUMENT_ADD, is it useful in my scenario.
plz give the details briefly
thanks & regards
     raj.

HI ,
call function 'RV_INVOICE_CREATE'
    exporting
      with_posting = 'B'
      vbsk_i       = i_xvbsk
    importing
      vbsk_e       = i_xvbsk
    tables
      xkomv        = xkomv
      xvbpa        = xvbpa
      xvbrp        = xvbrp
      xvbrk        = xvbrk
      xkomfk       = i_komfk
      xthead       = xthead
      xvbfs        = i_vbfs
      xvbss        = i_vbss.
These table are not optional , these all are mand...
Reagrds,
Bharani

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What are the content conversion parameters for this structure

Hi All,
The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
Schedule D - District/Port List (by District Code) [Produced13APR11]
District |    Port      |    Name
Code     |    Code      |
01       |              |    PORTLAND, ME
         |    0101      |    PORTLAND, ME
         |    0102      |    BANGOR, ME
         |    0103      |    EASTPORT, ME
         |    0104      |    JACKMAN, ME
         |    0105      |    VANCEBORO, ME
         |    0106      |    HOULTON, ME
         |    0107      |    FORT FAIRFIELD, ME
         |    0108      |    VAN BUREN, ME
         |    0109      |    MADAWASKA, ME
         |    0110      |    FORT KENT, ME
         |    0111      |    BATH, ME
         |    0112      |    BAR HARBOR, ME
         |    0115      |    CALAIS, ME
         |    0118      |    LIMESTONE, ME
         |    0121      |    ROCKLAND, ME
         |    0122      |    JONESPORT, ME
         |    0127      |    BRIDGEWATER, ME
         |    0131      |    PORTSMOUTH, NH
         |    0132      |    BELFAST, ME
         |    0152      |    SEARSPORT, ME
         |    0181      |    LEBANON AIRPORT
         |    0182      |    MANCHESTER USER FEE AIRPORT, NH
02       |              |    ST. ALBANS, VT
         |    0201      |    ST. ALBANS, VT
         |    0203      |    RICHFORD, VT
         |    0206      |    BEECHER FALLS, VT
         |    0207      |    BURLINGTON, VT
         |    0209      |    DERBY LINE, VT
         |    0211      |    NORTON, VT
         |    0212      |    HIGHGATE SPRINGS/ALBURG

since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
Regards,
Ninu

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it.

What are the dememsions on this?

Similar Messages

Maybe you are looking for